Recurso para profesores de tecnología bilingües

1. How to produce
Isometric drawings

2. For this activity you are
going to need:
A sharp pencil A ruler A protractor

3. Tip: When creating an isometric
drawing remember 30 degrees:

4. Start by drawing a straight line

5. Draw a straight line upwards at
90 degrees.
Draw your lines faintly

6. Draw 2 lines each at 30 degrees
Continue to draw your lines faintly

7. Measure 100mm along the straight
line and make a small cross.

8. From your cross, using your protractor
draw 2 more lines at 30 degrees.
Continue to draw your lines faintly

9. Measure 80mm as shown and
make 2 straight lines.

10. Making sure your lines are 90
degrees, draw 2 lines straight up.

11. Place your protractor on the top left
corner and construct a 30 degree
line as shown.

12. Complete your cube, as shown.

13. Draw over your faint lines,
you are looking to make them bold.

14. Now that you have made your
basic shape why not try adding
further details like;
An internal Knuckle Joints