Different Types Of Media That Can Be Used For Connect...

Different Types Of Media That Can Be Used For Connect...
What are the different types of media that can be used to connect different computers together into a
computer network?
There are four basic types of connection media that are used for connecting separate computers
together on the same computer network. Both categories are copper cabling, fiber optic cabling,
wireless signal, and infrared signals. The first two types of connection media on our lives are known
as bounded network media because they both use wire of some sort in order to connect or bound one
computer to another on a network. Copper cables are the most commonly used of the four types of
network connection media. Copper cabling sends data in binary format from one computer system
on a network to another through the use of electrical signals. Fiber optic cabling follows copper
cabling when it comes to frequency of use. Fiber optic cable has a completely different
configuration for transferring binary data across the network from one computer system to another
computer system. Unlike copper cable fiber optic cable does not use electrical signals when
encoding binary data instead it transmits the data as pulses of light. Fiber optic cables transmit the
binary data as light pulses in a similar fashion to the way copper cables use electrical pulses to
transmit binary data. The next two types of connection media are known as unbounded network
media due to the fact that they do not use any type of physical wiring to connect the different
computer systems on a
... Get more on HelpWriting.net ...

Analysis Of William Shakespeare 's Romeo And Juliet
Introduction "What's in a name? That which we call a rose by any other name would smell just as
sweet." This quote from Shakespeare is from the balcony scene when Juliet tells Romeo that his
name is meaningless and that he is still a handsome young man and that only their family names are
enemies. This same quote can be applied in today's society in how people address each other based
on different situations, especially when addressing women. There are many different titles that can
be used to address women as opposed to men, but despite the title used, the woman herself does not
change. Only the meaning and stereotype associated with the title used changes.
Throughout the years, the titles used to address women have slowly shifted meaning from that of a
social status to that of a marital status. Erickson (2014) explains that the titles "Miss" and "Mrs." are
the oldest coined terms used to address women, and both of them derive from the title "Mistress."
Both titles were generally only used for those of higher power and status. "Miss" described young
girls while "Mrs.", described women who had governed subjects, was skilled, or who taught. Upon
reaching adulthood, a "Miss" became a "Mrs.", and according to the Oxford English Dictionary, it
was common for older, unmarried women to still use the title "Mrs." so they could increase their
standing to be on par with married women. This was why sometimes this referred to as a "title of
politeness" or "courtesy title." But by the

Definitions and Terms
Define the following terms:
Term Definition
Application
(in terms of cabling infrastructure) How cabling should be installed and it use.
Unshielded Twisted –Pair A popular type of cable that consists of two unshielded wires twisted
around each other.
Shielded Twisted–Pair A type of copper telephone wiring in which each of the two copper wires that
are twisted together are coated with an insulating coating that functions as a ground for the wires.
Fiber–Optic Cable A type of cable that has a central glass core with cladding to prevent light loss
and dielectric strengthening material which protects the core. They come in single, dual or multi–
strand.
Dark Fiber Dark fiber refers to unused fiber–optic cable. Often time's companies lay ... Show more
content on Helpwriting.net ...
Headroom In the digital and analog audio, headroom refers to the amount by which the signal–
handling capabilities of an audio system exceed a designation level known as Permitted Maximum
Level (PML). It can be thought of as a safety zone allowing transient audo peaks to exceed the PML
without exceeding the signal capabilities of an audio system.
ANSI Acronym for the American National Standards Institute. Founded in 1918, ANSI is a
voluntary organization composed of over 1,300 members (including all the large computer
companies) that creates standards for the computer industry.
NFPA National Fire Protection Association (NFPA) A nonprofit organization that is concerned with
fire prevention and safety. They are responsible for publishing the (NEC) National Electrical Code
which has been adopted into law by many municipalities and states.
FCC Abbreviation of Federal Communications Commission. Among its duties in regulating public
airwaves in the United States, the FCC is responsible for rating personal computers and other
equipment as either Class A or Class B
NIST Short for the National Institute of Standards and Technology, NIST is a non–regulatory federal
agency within the U.S. Department of Commerce.
OSHA Occupational Safety and Health Administration (OSHA) is an agency of the United States
Department of Labor. OSHA's mission is to "assure safe and healthful working conditions for
working men and women by setting and enforcing standards and by providing

Flippin Sweet Executive Summary
1. Analysis of the organization and its audience
The Flippin Sweet is a local "mom and pop" restaurant located in Kearney, Nebraska. It is a small
place, but it has been named one of Midwest Living Magazine's top 27 pizzerias in the midwest, one
of the top 10 restaurants in Nebraska, according to TheCultureTrip.com, and selected as the "Best of
Kearney" 2 years in a row by Kearney Hub Readers. The restaurant is well known for its large
portion sizes, including 20 inch calzones and pizzas. Their menu also consists of a variety of pastas,
sandwiches, and unique desserts. Flippin Sweet also has a food truck, which they can use to provide
a larger range of services than they normally would be able to. (The Flippin Sweet)
The primary audience of Flippin Sweet is all pizza lovers in the midwest area.
The large serving ... Show more content on Helpwriting.net ...
Why use social media: We need to use social media in businesses today because almost everyone is
constantly connected through some sort of social media. Using social media is one of the fastest
ways to reach new and current consumers of any place of business. When using social media you
can upload pictures, videos, and unlimited access to updates and other possibilities for advertising.
2. Channel: The channels that we are using for our project is Facebook, the Kearney App, and
Twitter. The "Flippin Sweet Eatery" currently has Facebook and Twitter. Their Facebook page has
4,459 likes. The Twitter page only has 255 followers. However they have not used the Kearney app
yet.
3. Objective: For the Twitter page moving from 255 to at least 500 followers should not be very
hard. The Facebook page has quite a bit of followers, so 5,000 likes would be very attainable. The
Kearney app could be used to increase profits and consumer levels. The way to measure these goals
is to set up the plan with the restaurant, record current levels of goals. Then after 6 months coming
back and recording the new

Biography Of Nik Christensen And Dominic Mcgill
IEB conclusive research essay
Nik Christensen and Dominic McGill have influenced my art , being tremendously closely related to
my art works. Christensen sees his works as a trailer of a total story , which I decided to use this
idea on my art works , drawing a scene from my life explaining my emotions. McGill genre she
sticks to is paradigm of political discourse. She does not refer to the future but more about the past ,
political and events. Her artwork "a man is wolf to man" , with the organic motions of a swirl ,
discerning how our world is spinning into a spiral with all the mistakes being made. This closely
influencing my work , with me walking into a spiraling future.
"Hopscotch". "It all goes down the drain"
Chelsea Bloem
Grade 12
Page 2 Christensen and McGill have both relatively influenced my art pieces. With both of their
artworks resolve around trying to balance life out with different stories to tell , as I am telling mine.
Index
Tittle and index: Page 2
Research essay: Page 3–6
Visual images: Peace 7–9
References : Page 10
Rubric: Page 11–12
Introduction:
My art is based on the genre of balance and anxiety. These themes are found in almost every human
being , when stressed , trying to balance their lives and everything at once and anxiety of not being
able to do anything

Analysis Of Siegfried Sassoon 's ' The Great War '
Throughout history, many individuals would have never thought a horrific war would occur, which
was World War 1 (The Great War). Many men was picked to fight during this war, they thought that
it was going to be an easy journey. However it did not end up going in the right direction, so it took
a left turn based on seeing fellow soldiers die before your eyes, the weather was always wet and
muddy, and multiple firearms always pointing at each other. Before the men began their journey into
booby–traps of the war, many individuals encouraged them that fighting in the war was fun.
However, it was far from fun: many soldiers fought in trenches, many became shell shock, and
many saw the world in a much more horrific view when returning back home. A famous poet,
Siegfried Sassoon, wrote an outstanding poem, which explained how soldier's mindset before
entering the war was encouraged by an authority figure. According to the poem 'They' it states, "The
Bishop (authority) tells us: 'when the boys come back/ they will not be the same" (1–2). This
statement means that the Bishop is trying to say that after the war, men will be real men. These
soldiers went into the war singing or humming songs, but they soon realized the war was pure evil.
Sassoon believed that the individuals fighting in The World War, tried to overcome pain with the
mystery of God. So, the make belief journey presented to these young men was extraordinary happy,
then the truth started to unravel. During the war,

Boss Capital Pros And Cons
Boss Capital Review
Boss Capital is popular with traders and comprises excellent service normally available by contact
with leading brokers. Options with their website include the help of established professionals who
make available the latest regulated trading technology, an asset list, payouts as high as 85%, and
other perks.
Boss Capital makes available an extensive educational section, including ebook, video, and the
latest from the market. There is also ready contact with the broker, good for quick and easy answers.
An additional very big plus is 24/7 contact support.
All that's necessary for an account is 200 USD, with a minimum trade of 10 USD. If you are
comfortable making trades with Boss Capital, you can invest more, or opt to discontinue.
Boss Capital Pros and Cons ... Show more content on Helpwriting.net ...
Big rates of return, plus bonus opportunities equals substantial money–making potential for trading.
Unfortunately, however, Boss Capital is not a regulated broker. This could be worse, because at least
Boss Capital is part of a respected platform (TechFinancials), but this information will discourage
many aspiring brokers from trading with Boss Capital. The status of Boss Capital is due to a focus
on U.S. trading, which poses legal difficulties catering from European locations to Americans.
Regardless, Boss Capital has a very easy–to–use platform without much chance of user–error
occuring. Data with Boss Capital is securely SSL–encrypted and Boss Capital has built a strong
reputation within the binary community despite this issue for traders who insist on regulated account

A Short Story : The Story Of The Story?
"Dinero." Miguel held out his hand. "Quiero que la otra mitad."
Paul glared at him. "Speak English."
"No."
Paul looked at Sherry.
"I think he wants the other half."
"No, tell him he takes us all the way in. Then we give him the rest of the money."
Sherry consulted her phone and told Miguel as best she could.
"No." Miguel scowled. "You pay now."
Paul pointed toward the fence. "All the way."
"I agree. Don't give it him," Sherry said. "It's a scam."
Miguel squared his shoulders. "You pay now," he said again.
What could they do? It was clear this was as far as he was going. But Paul wasn't giving him the
other half of the money either. He had the pistol if Miguel wanted to take things any further.
Finally Paul said, "I'll give you another fifty but we want the water." By the time the sun reached its
zenith it would be scorching.
Miguel grumbled but popped the trunk.
Paul signaled for him to kill the engine.
"No."
But Paul persisted and Miguel did.
Paul and Sherry got out and grabbed the water jugs from the trunk. Paul paid Miguel, who started
the car, the trunk flapping as he tore off, and the Toyota disappeared into the darkness.
*
Well, here we are, Paul thought. "Welcome to Mexico, Sherry."
She didn't say anything.
He nodded toward the barbed wire fence. "I guess we start there."
"What about animals?"
"I've got the pistol."
She frowned but took his arm as they walked to the fence. "So this is it? All we have to do is cross
this fence and we're in Mexico? I'd heard about wading across the Rio Grande."
"That's in Texas." He pushed down on the top barbed wire with his foot and the post gave.
"Careful."
"I can hardly see a thing."
"The horizon's lightening. The sun will be up soon."

"And in the meantime?"
"We'll go slow."
The sun inched up as promised and things seemed more hopeful. They reached a clearing. Thank
God for technology, Paul thought, considering how lost they'd be without their phones. Mexico. A
whole different world. He knew it was violent just inside the border. Drug gangs dominated the
towns, and bandits ruled the roads. Their first requirement would be to find reliable transportation to
get further in–country.
"Aren't there snakes here?" Sherry frowned as they walked through dry high grass

Theme Of The Boy In The Striped Pyjamas
The Boy in the Striped Pyjamas
An Elegant Flop by Boyne John Boyne was born in Dublin, Ireland, in 1971 and studied Literature
at Trinity College, Dublin, and creative writing at the university of East Anglia, Norwich. He has
published nine novels for adults and four for a younger audience, all of which are actually published
in 47 different languages, including The Boy in the Striped Pyjamas. The Boy in The Striped
Pyjamas follows the story of a nine–year–old boy named Bruno who reluctantly moves out his
comfortable home in Berlin to 'Out–With' because of his Father's job. After being rather bored in his
new dismal house, and given no answers by neither his parents nor servants, he is forced to stay with
his older sister who is a constant pain–in–the–neck along with a rather brooding Lieutenant. From
his window Bruno has seen countless men and boys huddled by the barbed wire fence, scared of
something he just doesn't understand, and they were all wearing the same blue striped pyjamas.
After doing a little forbidden exploration, he meets a boy his age but not quite his size. Yet Shmuel
is not here to play with Bruno. John Boyne has demonstrated the theme of the innocence of
childhood in such a way that is rather interesting, ... Show more content on Helpwriting.net ...
Many argue time and time again that such an issue such as the Holocaust shouldn't be tackled
through the eyes of a frustratingly naïve boy as it trivialises the subject. As mentioned, the ominous
storm that is built up does not end satisfyingly well enough, and is summed up in just two short
chapters. Bruno never really finds humanity, thus the true horrors of the Holocaust isn't delivered.
TBITSP is also quite historically incorrect. These death camps were surrounded by guards and it's
also surprising that a weak boy would survive at Auschwitz for a whole year. The areas outside the
fences where no–man lands. Anyone found there would be shot, regardless of who they

Unethical Behavior Of Police
In society we call upon certain individuals to help us in times of need or urgency. Sometimes these
individuals are police officers. As a member of society, I would like to be able to call upon the
police in a time of need since we expect them to protect and serve our community. However, some
situations can expose corrupt police officers partaking in unethical behavior while protecting and
serving the community. In this paper I will discuss the unethical behavior of a group of police
officers from Baltimore, Maryland. This is an ongoing investigation that keeps producing more
evidence of other officers partaking in unethical behavior.
ISSUES WITH THE OFFICERS ACTIONS
Baltimore Police Department had a special unit known as Gun Trace Task Force. This particular unit
was very successful in helping drop the gun crime in the Baltimore area. As recently as October
2016, the Baltimore Police Department was praising the unit in an internal newsletter for its work
getting guns off the streets (Gile, 2017). The unit made more than 110 gun arrests in less than 11
months last year (Gile, 2017). While these officers are being recognized for their excellent work,
they were committing their own crimes on the streets.
In March 2017, these same seven police officers from the Baltimore Police Department were
federally indicted by the U.S. Attorney of Maryland on racketeering charges (Rector, 2017). "Sgt.
Wayne Jenkins; Detectives Momodu Gondo, Evodio Hendrix, Daniel Hersl, Jemell Rayam,

Analysis Of FIFA 18
Last year, FIFA 17 was the best–selling game on the PlayStation 4 with over 10 million units sold
worldwide. Not only did it perform exceptionally well on the PlayStation, across all platforms, only
Pokemon Sun/Moon on the 3DS sold more copies.
Without doubt, the FIFA franchise is huge and while EA Sports know that they're likely to top the
sales charts each year, I'm happy to report that with FIFA 18, they are not resting on their laurels.
Thanks to subtle improvements to the gameplay, as well as new features in the 'Career Mode', this
year's FIFA is EA's most complete entry in the series to date.
Gameplay
FIFA 18 grabs your attention from the very first whistle, dropping you into an intense Madrid derby,
as you take control of ... Show more content on Helpwriting.net ...
This attention to detail also stretches to certain players. While it would be impossible to uniquely
program thousands of footballers individually, the bigger name, as well as some lesser known
players, have their own unique style of play. Of course, Ronaldo and Messi play like their real life
counterparts but it's refreshing to see someone like Matt Ritchie behave in a similar fashion to real
life.
Although not a bad thing, the differences between FIFA's 17 and 18 regarding AI behaviour
adapting during a match is less noticeable. Games are slow and play out similarly to FIFA 17, with
an emphasis on possession being the key to unlock defences. However, one welcome change I found
is how teams react to falling a goal or two behind.
One gripe I have of FIFA games is how the AI responds to conceding early on. Teams tend to go
kamikaze, prematurely piling men forward leaving gaps in defence. This behaviour is common at
the latter stages of a real match but not early on. With FIFA 18, teams do seem less partial to keep
throwing men forward nonsensically when falling behind, now only doing so when time is running
out or the possibility of a comeback is likely.
The quick substitution feature is a welcome addition. Quite simply, as a match nears its conclusion,
pressing the R2 button brings up a small box where you can substitute a tiring player with a
positional like–for–like replacement instead of pausing

Mail Fraud Cases
The federal mail and wire fraud statutes ban plans or schemes to defraud that includes the utilization
of mail or wire communications. Both condemn deceitful conduct that may likewise come
surprisingly close to other federal criminal statutes. Both may serve as money laundering offenses.
Both are deserving of imprisonment for not more than 20 years; for not more than 30 years, if the
victim is a financial institution or the offense is committed in times of crisis. Victims in both of these
situations are entitled to restitution. Both may bring about the relinquishment of property. The mail
fraud statue was introduced in the early nineteenth century and the wire fraud statute is a little more
recent as it was enacted in 1952.
Mail fraud, by definition, ... Show more content on Helpwriting.net ...
During this time, the United States Supreme Court expanded and contracted the reach of the mail
fraud statute, finally merging the various components in Schmuck v. United States, 489 U.S. 705
(1989). From its origins in 1872 to approximately the middle of the twentieth century, the mail fraud
statute's reach was considerable. It was only necessary that the scheme to defraud should be devised
or intended to be devised and a letter placed in the post office for the purpose of executing the
scheme or attempting to do so. The breadth of the statute was extended two years later when the
United States Supreme Court held, to satisfy the mailing requirement, it is sufficient for the mailing
to be incident to an essential part of the scheme or a step in the plot. This broad standard remained
until Kann v. United States, 322 U.S. 88 (1944). In Kann v. United States, the defendants were
corporate officers and directors who were accused of creating a dummy corporation in order to
divert profits into their own pockets. As part of this fraudulent scheme, the defendants "allowed" the
corporation to issue checks payable to the both of them. The defendants cashed the checks at local
banks, which then mailed the checks to the drawee banks for collection. The court held that the
mailing of the cashed checks to the drawee banks could not supply the mailing element of the mail
fraud charges. The defendant's fraudulent scheme had reached fruition. "It was immaterial to them,
or to any consummation of the scheme, how the bank which paid or credited the check would collect
from the drawee bank. The federal mail fraud statute does not purport to reach all frauds, but only
those limited instances in which the use of the mails is a part of the execution of the fraud, leaving
all other cases to be dealt with by appropriate state law" (Kann, 323

Steve Truscott Research Paper
In a small southwestern Ontario town of Clinton, Canada, associating with Royal Canadian Air
Force base where everyone lived close around the section – including a young, 14–year–old boy
named Steven Murray Truscott, a popular, athletic teenager who lived with his parents on the RCAF
base. His father, Daniel Truscott, was an RCAF warrant officer and his mother, Doris Truscott, who
did not have a job, she only devoted her time looking after their family of 6. In June 1959 after a
fellow classmate, Lynne Harper was found dead and raped, Steven Truscott was found to be the only
suspect by evidence so he became convicted of first–degree murder. He would soon known to be
Canada's youngest death–row inmate, sentenced to be hung months after the murder, at age 14. It ...
Show more content on Helpwriting.net ...
They eventually took him into custody on the Clinton Air Force Base the next evening on June 12th,
1959. The Police had asked Steven plenty of questions and to explore his evidence, of his
whereabouts and what he did, which Steven maintained that he only gave Miss Harper a lift to a
highway intersection. The coroner, Jon Penistan, who examined Lynne Harper's body, had the
responsibility to give the time to pinpoint when the deceased had died as time was crucial for Steven
on whether he was the murderer or not. Jon estimated the time of death had happened between 7 to
7:45 P.M. by using forensic entomology with the larval development of insects. With no other
suspects and no new evidence, Steven was still the prime suspect despite the statements he had
made, claiming to have saw Miss Harper last at 7:30 P.M. but the details of his account were found
deceptive and that they felt like there were more to the

Air Conditioning Blower Control Module
Air Conditioning Blower Control Module
Repair common AC blower control module problems. Drivers and car owners of some popular
Chevrolet trucks and utility vehicles are having issues with intermittent interior fan operation.
In fact, I had one situation where the blower fan got stuck on high even when you turned off the
ignition key. However, it seems like the most common complaint is that the fan doesn 't respond to
speed adjustments or doesn 't work at all.
Some of the more popular vehicles included in this issue are the Chevrolet Silverado pickups,
Trailblazer, Suburban and Tahoe sport utility vehicles. Of course, this applies to the GMC version of
these vehicles like the Envoy and Yukon. The model years with the most problems are ... Show more
This is the digital type set up that function like the HVAC control panel in your house. You set the
temperature for 70 degrees and the climate control system automatically adjusts the temperature
doors and blower speed to accommodate your settings.
If your vehicle has the base option set up with two dials and slides to select a temperature range
between cold and hot, you do not have a blower module. Instead you have a blower resistor.
Nevertheless, both of these systems are troublesome and might need their respective parts replaced.
It 's just important to make sure you know the difference and what parts are on your automobile.
Diagnosing a Defective Blower Control Module
On the automobiles we 're discussing you access the blower module from the passenger side foot
well. On vehicles with high–level trim there might be a hush panel to remove to gain access.
Another thing to take note of is that on most of these models the glove box will swing out of the
way when you push up on the stop tab in the upper left corner of the glove box compartment. When
this swings out of the way you have an excellent view of the blower motor and its two wire
connector.
Although you probably have a bad blower module you still want to take a few basic tests before you
purchase the replacement parts. You want to check the fuses to make sure that they are not blown. If

they are blown it could be yet another sign that the module is drawing too much current.
The next step is to

Vision2Learn
Unit WP2: Word processing software
You should use this file to complete your Assessment.
How to complete and send your assessment:
Save a copy of this document, either onto your computer or a disk
Work through your Assessment, remembering to save your work regularly
When you've finished, print out a copy to keep for reference
Then, go to www.vision2learn.com and send your completed Assessment to your tutor via your My
Study area – make sure it is clearly marked with your name, the course title and the Unit and
Assessment number.
Please note that this Assessment document has 15 pages and is made up of 7 Parts.
Learning outcomes
Throughout this Assessment, you will meet a number of different learning outcomes ... Show more
2.1 Identify the document requirements for structure and style.
2.3 Create and modify columns, tables and forms to organise information.
3.1 Identify how the document should be formatted to aid meaning.
3.2 Select and use appropriate techniques to format characters and paragraphs.
3.3 Select and use appropriate page and section layouts to present and print documents.
Part 4:
1.5 Select and use a range of editing tools to amend document content.
2.3 Create and modify columns, tables and forms to organise information.
Part 5:
1.4 Identify when and how to combine and merge information from other software and documents.
1.5 Select and use a range of editing tools to amend document content.
1.6 Combine or merge information within a document from a range of sources.

3.3 Select and use appropriate page and section layouts to present and print documents.
Part 6:
1.4 Identify when and how to combine and merge information from other software and documents.
1.6 Combine or merge information within a document from a range of sources.
Part 7:
1.7 Store and retrieve document and template files effectively, in line with local guidelines and
conventions where available.
3.4 Describe any quality problems with documents
3.5 Check documents meet needs, using IT tools and making corrections as necessary.
3.6 Respond appropriately to quality problems with

Design Of An Integrated Circuit
CHAPTER 1
1. INTRODUCTION
1.1 Overview
Nowadays it is impossible to imagine any device where microelectronics is not present, from
personal computers through home appliances, modern society relies on the performance of
integrated circuits. It is so, that microelectronics advent has opened doors to new horizons where
integrated circuits have played an important role from the very beginning of their creation since the
late 1950s, when Jack St. Clair Kilby, a Texas Instruments Engineer, decided to change the future,
conceiving the first integrated circuit, where the components, passive as well as active, were placed
over a piece of semi–conductive material (Germanium piece) that was half the size of a paper clip.
The success of this element (called chip due to its small size) containing a few transistors, resistors,
and capacitors, led to the Physics Nobel Prize for its inventor in 2000.
The design of an integrated circuit involves a development plan, where its functional characteristics
and performance will define the elaboration of the logic circuit diagram. Once the diagram is
finished, a series of simulations are executed to test the operation of the designed circuit; if no issues
are encountered, a massive production plan is implemented.
This manufacturing process has allowed the miniaturization of most of the devices used daily,
translating to lower production costs. The typical manufacturing process involves the
interconnection of the integrated circuit chips to the

Advantages And Disadvantages Of Forging Process
1. Forging process is done by using forging machine, presses, die, and large powerful hammers to
form the materials on desired shape. This is use in making shapes out of large material. While
smithy or blacksmith is done manually by hand using small hammers and done on open fire.
2. Open fire in forging is used by fully covering for example a metal by and putting water to where
the fire is needed to be ignited while in stock fire is used for large metals that needs to be heated and
a tunnel is to be made from the pack of coal where the metal is to be place and heated.
For me, stock fire is more advantageous because in open fire, the metal touches the coal which can
result to damage in the metal and some of the ash from the burnt coal may ... Show more content on
Helpwriting.net ...
Centre–burst in extrusion is caused by high stress in the metal which is caused by the uneven
distribution of force in the cross section while extrusion is being done. It can be prevented by
increasing the friction in contact between the die and metal.
11. Some of the examples of product created through extrusion are insulated wires, hollow pipes and
tubing, casing of fire extinguisher, collapsible tubes and gear blanks.
12. Extrusion has its advantages. And some of this advantages are that production has a low cost,
different shapes and detailed cross section can be made through extrusion. Hardness and yield
strength is also increased and it requires no further machining. But extrusion has its limitation, and
only ductile materials can be used in this process and it can suffer different defects due to stresses
created by friction and temperature.
13. Rolling process deals with the reduction of materials thickness and cross sectional area using
compression method. Material is inserted between rollers which will squeeze the material reducing
it to desired thickness.
14. Rolled product is considered usually better than of casting because the rolled product is more
compacted and its molecules bond is tighter making the product much harder than that of casting.
And cast products can encounter more defects than that of rolled

Nt1310 Unit 1 Assignment
Connector Installations
In this Assignment I will demonstrate different connector installations and there usage. I will
describe the assembling process and any issues if ran into, along with ways to prevent the same
problems from turning up in the future.
Twisted–PairCable
For this cable I will use the Rj45 connector which is standard connection for most systems .I would
then measure the cable I needed and trimmed it to the proper length using the cable cutter. Then I
Used the cable stripper to strip about 1 ½ inch of the jacket from the end of the cable. Pull the
trimmed jacket from the cable, there will be an exposed white thread cut that to the end of the strip
cable so it will not be in the way of your connector. Untwist all the inner

Design And Implementation Of Monitoring System For Frozen...
Design and Implementation of Monitoring System for Frozen Food during Transportation using 1–
wire Protocol: A Review
Ms. Sandra N Francis
Electronics and Communication
Engineering
GHRAET, RTMN University
Nagpur, India francissandra986@gmail.com Prof. Amol K Boke
Electronics and Communication
Engineering
GHRAET, RTMN University
Nagpur, India amol.boke@gmail.com Abstract– Monitoring of pharmaceutical and frozen food is
one of the issues in recent times because there is high probability of food spoilage during transport.
The problem in other techniques like RFID based or Wi–sensors based is that these systems are not
suitable in environment that is dusty, dirty and polluted. Along with this the likelihood of antenna
parameter interference is high since food contains large part of water that amounts to interfere in
antenna gain parameters and propagation abilities are affected that is surely eliminated in this
system. The movement of shipment from source to destination along with abrupt or slow
temperature and humidity changes during transport can be recorded by thermochron DS1921G and
humidity sensor SHT11 that implements 1–wire protocol respectively. This project demonstrates the
use of 1–wire technology for the monitoring of shipment. The micro– controller of ARM7 family
LPC 2148FBD64 will be used at the heart of the system. Tracking and monitoring will be done
using GPS and GSM technologies. The main purpose of this paper is to design and implement a
system

The Wire Scene Analysis: The Baltimore Police Department
The segment of The Wire I have chosen to analyze begins at 54:14 in episode 13, season 1 and runs
through 103:34, comprising four different locations and eight scenes changes. Two main elements
hold these scenes together as a coherent segment–camerawork/editing, particularly at the beginning
of each scene, and thematic material. Thematically, each of these scenes exhibits a passing of
torches. We see the changes of power that are developing in the police department and on the streets:
Lt. Daniels not being promoted to Major in the department, Dt. Herc teaching the rookies how to run
an investigation, Boodie and Poot taking over D'Angelo's position of running the towers, Maj.
Rawls transferring Dt. Freamon to homicide by dumping McNulty to the marine unit, and Stringer
being in control of the Barksdale organization while Avon is incarcerated. Interpreting the passing of
... Show more content on Helpwriting.net ...
The segment consists of two groups that are both going through substantial transitions of power at
the moment: The Baltimore Police Department and the Barksdale organization. The Baltimore
Police Department is making a number of alterations in personnel after they have recently closed
their investigation on the Barksdale organization. These changes in personal are believed to better
the city of Baltimore and make managing the drug trade a little easier, especially with drug kingpin
Avon Barksdale locked up. The first two scenes in the segment this sense of security that city going
to improve is represented. In the first scene, the audience is greeted by a pair of elevator doors

Dynamic Aircraft Case Study : Key Factors
Dynamic Aircraft Case Study
Crucial Factors:
Eastern Electric Company offers the lowest bid for the wire, & Advanced Wire provides the highest
bid.
The engineering department refuses to request to alter suppliers, even after test results show that
Advanced Wire is the only supplier who meets the requirements.
All suppliers meet minimum requirements and have the ability to meet the required delivery dates.
Weight is a vital factor to take into consideration for the product.
When tested in the lab, it was found that Advance Wire was mediocre in conductivity &
abrasiveness, while also being heavier than all other samples.
After examining the results for the other supplier samples, it was shown that Advance Wire's sample
was most suitable for the extremely high temperatures.
After obtaining the engineering requirements for the wire, six samples were sent to the lab to be
tested.
Advanced Wire's product was of the highest attainable quality, in regards to the engineering
department's opinion.
There are multiple potential sources, not just one single supplier.
The wire needs to be able to withstand extremely high temperatures, so it can be considered a
"special need."
Dynamic Aircraft has a company policy that states it must have at least two qualified suppliers for
their critical materials.
Advanced Wire is known to have high quality, but at the same time, being a higher priced producer.
The wires from the other suppliers have not yet been evaluated.

All Quiet On The Western Front Analysis
In the novel All Quiet On The Western Front written by Erich Remarque, the protagonist Paul deal's
with the new ways of fighting in world war 1 as this war introduced multiple new ways to bring
death and violence. He needs to adapt to living in the trenches, machine gun fire, and the constant
fear of a shell landing on him.This novel portrays the ways in which living styles and weapons in
war changed warfare for the worst, drastically increasing the brutality. During world war one, the
soldiers would have to fight on the battlefield and needed to find a way to stay there without
immediately dying. The military found that digging up a system of ditches in the ground would keep
the soldiers alive long enough to fight. These ditches, named trenches, changed the men inside of
them. The men would live in some of the cruelest conditions within a base than any other previous
war. Men within the trench had to deal with a foot disease known as trench–foot along with constant
splinters, which both caused major damage to feet. When Paul's within the trench heading to the
hospital area, he says "My thoughts become confused. This atmosphere of carbolic and gangrene
clogs the lungs, it is a thick gruel, it suffocates" (Remarque 2.37). This line says how living
condition's inside trenches made soldiers miserable with multiple uncomfortable smells and other
influences. The living conditions of the trench show how world war one had changed warfare for the
worst through the increase in

Finn Schools Case Study
Legal requirements and restrictions Finnish Schools Internationals must follow in entering a new
market, Canada.
All institutions are strictly required to register with Ministry of Education in Canada and submit
their statistical reports yearly. According to the Policy and Procedure Manual for the Private Schools
in Canada, the NOI, Notice of Intention to Operate a Private school assigns the Canadian Ministry's
prerequisite regarding the attributes of the private institutions in Canada. They gather data and
statistics which includes the name of the institution head, the address, hours of instruction and
estimated student's enrollment. The manual also states that all private schools are obligated to
submit this form by the 1st of September ... Show more content on Helpwriting.net ...
With a bank draft, when a person requests one, they must immediately transfer the forms from their
normal account to cover the amount of the check. As an institution receiving the draft, the most
important factor is to speak to the local bank or financial institution about the currencies in which
the Finnish Schools International in Montreal can obtain a bank draft and the countries to which the
institution can send it to in case of refunds to the parents. The only con to bank drafts is the slow
arrival of funds. For the institution to receive money a lot quicker, there are many transfer services
which allows to make bank transfers which can be received by the Finnish Schools International's
bank account in Canada. The name of a few of the transfer services are HiFx, World Remit, Transfer
Wise, World First, and QFX.
According to the Canada Revenue Agency website, the parents making the investment in Canadian
private schools should be aware of the family tax benefits that are available to through the federal
and provincial government.
Federal Tax Benefits:
Canada Child Tax Benefit– Tax– free monthly payments may be supplemented by provincial or
territorial child benefit payments and may be enhanced by the Canada Child Benefit for families
with children guaranteeing continued support. This benefit is not automatic and must be applied for.
At the Finnish Schools in Canada, we will ensure that we solely emphasize on well–qualified
teachers and

Cordless Screwdrver Research Paper
How to drill a pilot hole with a cordless screwdriver
What estimate do boring apparatus I require?
The measure of boring apparatus you need will rely upon the extent of the screw you need to embed.
A decent general guideline is to choose a boring tool that is somewhat littler than the width of the
screw's string. Along these lines, the boring apparatus will evacuate enough material to avert part,
however, will leave enough for the screw's strings to nibble into when its determined in.
You can check the sizes by holding the boring tool before the screw, and watch that the screw's
shank is no thicker. Cordless screwdrivers all have hexagonal tosses, so guarantee you select a
boring tool with a hexagonal shank.
Choosing drill mode
A

Summary Of Freddie Gray's Cases
The story of Freddie Gray's death and the subsequent trial against the six police officers being held
responsible calls into question how the relationship between the American police force and the
American citizenry is evolving. Gray died on April 19th, a week after he was arrested and sustained
severe injuries while in the back of a police van. The difficulty of obtaining objectivity in journalism
shines through in the barrage of coverage of his death and its aftermath across different news
platforms. The way that a story is portrayed is of critical importance – it influences readers to make
decisions that affect the world around them, and with an upcoming trial, it is crucial to ensure
citizens have access to the truth of a situation as the press can best uncover it.

Positive And Negative Effects Of Social Media
After debating whether social media has a positive or negative effect on teens, it has been concluded
that social media has a negative impact on the developing teenager. Social media can be a great tool
at times, by being a means to communicate with friends, classmates, and family members; It can
also help spread your ideas, hobbies and life experiences. But after reading the article Studies Offer
Mixed Messages On Social Media's Effects On Young People, By The Baltimore Sun, it explains
how social media has a negative effect on teens by causing them to compete (to have a better social
media feed), change their body to fit into society (the ideal body shape) and the way it can makes
someone feel. Social Media has a huge impact on a teens life since they are bombarded with the
pressures of buying new devices and apps, thus affecting the way teens represent themselves on
social media. In the article, It states how teens are driven to compete against each other by, trying to
have best social media feed. "Parents wonder if their children's constant use of Instagram, Facebook
or Snapchat is healthy. Teenagers talk about the pressure to post the perfect photo or compete with
the perfect lives their peers present on the Internet." (Baltimore Sun, para. 2). The pressures of
wanting to post the perfect pictures of their lives on social media, takes a toll on the teens when they
are using it. Instead of posting what is true to that person, they are competing to have the best
pictures and the most followers, which causes them to lose their true selves/identity. Social media
has a huge impact on a teen's impressionable minds, since teens are bombarded with the pressures of
buying the newest devices and apps; But not only does social media pressure teen's to buy these
items, it also pressures them to have the "Perfect Body". In today's society we have been influenced
by celebrities and the media's ideas of what the "Perfect Body" is. Whenever we go on our favorite
apps, you are bound to find an ad featuring a popular celebrity (or model), posing with a waist
shapers (or FitTea) (and/or photoshopped to a point where they are unrecognizable); (When teens
see this, this makes teens think differently about

Excessive Activity Fees
Excessive Activity Fees
If your current account/ checking account/ debit account has an excessive activity fee, then you need
to change banks immediately unless your account is special in some way. Savings accounts will
often have a fee for excessive activity because Federal Regulation D is a law that defines a savings
account as one where users make no more than six withdrawals or transfers per statement cycle or
calendar month.
In other words, a bank may charge you a fee if you withdraw money or transfer money from your
savings account more than six times per month. They may charge you a fee to discourage you from
using your savings account in a manner that is contrary to its federal definition. Many banks will
give you a warning if you move money from your savings account more than six times in a month,
and some will start to refuse transactions if you try to transfer/withdraw more than six times per
month.
Avoid
Stop transferring money out of or stop withdrawing money out of your savings account as often.
Keep your money in your checking account if you need to withdraw it or transfer it that often. Try
planning ahead to ensure you do not move money from your savings account as often as six times
per month. Better still, withdraw a larger amount at one time so you do not have to keep dipping
into your ... Show more content on Helpwriting.net ...
The small print is separated out into sections, and even a quick skim read will tell you if the section
requires a deeper read, or if it can be skipped. Once you settle in to read it, you will be surprised
how easy it is to understand. Use time that you would otherwise waste, such as when you are sat on
the toilet or waiting in a waiting room. If you have a digital version of their small print, then use the
search function to search for "$" and "fee" and "Fees" and "penalty" and "withdrawal" and "cancel"
and

The Problem Of The Infant
Thinking about these events, I developed the following theory on what could have occurred that
evening: At least one adult Bigfoot brought the infant to my house, creating a diversion by
scratching on the front door. Then, with our attention on the front of the house, they crept around to
the back of the house. The adult lifted the infant over the rail, then set it down on the deck. The
infant was too small to reach the carpet without taking one step, in the snow, on the deck, thus
leaving a footprint. It then made its way around the glass table, walking on the carpet, which had
very little snow on it. The infant opened the dog foot tub, consuming the dog food. The parent then
went around to the other side of the deck, reaching over the ... Show more content on
Helpwriting.net ...
The next morning, I went out before daylight to check the ash for footprints. To my shock and
surprise, it had worked!! In the ash, on the front left corner of my house, was a very clear footprint!
Retrieving my video camera, I began to take video in the low light conditions due to inclement
weather forecast to move in later that morning. The ash had also stuck to the bottom of the Bigfoot's
foot, this a positive print of the foot in the grass. It appeared from the direction of the prints, the
Bigfoot's destination back of the house, possibly to go over the four–foot dog fence into the
backyard. The track was fifteen inches long, with the ball of the foot five and a half inches wide, the
heel of the footprint was four inches wide. Unfortunately, this was an isolated event. The Bigfoot
learn quickly, and though I continued to put the fireplace ash out when the weather would cooperate,
the Bigfoot avoided stepping into the ash.
We would continue to allow the Bigfoot to eat our dog food as the winter wore on. We did this
because, we did not know how the Bigfoot would react if we abruptly removed their food source. In
February of 2011, the Bigfoot began to develop a pattern of visiting approximately once every ten
days. The scratching on the door stopped and the dog food was taken less often. In early March of
2011, my wife threw out about a dozen overripe clementines. She threw them into the dog lot where
the motion sensor flood light was located.

NT 1210 Lab 4 Essay examples
NT1210
Chapter 4 Lab
4.1.1
Why are standards so important for NICs, connectors, and media? Use your textbook and Internet
research to justify your answer.
Standards are put in place to make everything work together error free. Because Stability,
Consistency, Minimization of packet errors.
4.1.2
The voltage for registering a bit of 1 on Ethernet can be as low as 2.5 volts or even 1 volt. Why is
this so low when the capacity for transmitting electricity on the copper wire is so high? Use your
textbook and Internet research to support your answer.
Because the voltage used to transmit data needs only be high enough for the receiver to detect it.
Making the voltage higher would make the receiver electronics more difficult.
4.1.3 ... Show more content on Helpwriting.net ...
Using Figure 4– 1 and Table 4– 2 as an example, create the diagram and color coding for a
crossover cable. Use your textbook and Internet research to compose your answer. Hint: The
crossover cable is more complex than simply reversing the entire set of wires. You are wiring the
input pins to the output pins and vice versa.
4.1.6
Briefly describe the layered construction of a coaxial cable from the inner core to the outer
insulation. Use your textbook and Internet research to compose your answer.
Coaxial cable consists of a core of copper wire surrounded by insulation, a braided metal shielding,
and an outer cover.
4.1.7
Based solely on the distance limitation of UTP cable, what should you guarantee about any network
you plan for UTP cable? Use your textbook and Internet research to justify your answer.
100 meters & a signal repeater
4.1.8
What type of cable is necessary for each connection in Figure 4– 2: straight or crossover? You can
assume that S1 and S2 do not have the ability to resolve crossovers ( called Auto– MDIX). Use your
textbook and Internet research to compose your answer. They both need straight UTP
4.1.9
If all the connections in the network from Figure 4– 2 use UTP cable, will they all be able to

communicate correctly? If not, which links will not function and what should be done to resolve the
issue? Use

Essay about Battle of the Somme
The Battle of the Somme epitomizes the harsh realities of trench warfare for the Allies and
represents the negligent battle planning and technological advancements that are associated with the
stalemate of World War One. Trench warfare was common across the Western Front, with similar
strategies being employed by both opposing sides. Sir Douglas Haig, one of the British coordinators
for the Somme offensive is blamed with an offensive strategy destined for failure. The British
offensive, an utter failure, resulted in a stalemate, which was common throughout World War One.
The British development of the tank, while it eventually ended the horrendous stalemate, was
ineffectively used during the Somme.
Trench warfare became a common ... Show more content on Helpwriting.net ...
The British went into the Somme with a mixed attack plan, which led to an unsuccessful first assault
resulting in a battle of attrition. The opening day of The Battle of the Somme resulted in near 60,000
casualties for the British, the largest in British military history for a single day. Originally the
Somme was supposed to be a French dominated offensive, however the Germans attacked to the
South in Verdun occupying the majority of French troops. The British were then thrust into control
of the offensive, leaving Sir Douglas Haig and General Rawlinson to arrange an offensive strike
against the Germans. Haig advocated for the use of infantry including foot soldiers as well as
cavalry to lead the offensive. Rawlinson countered with a bite and hold strategy, which involved
fortifying a strong defense and warding off German counter attacks. Rather than committing to one
strategy, the two were combined in order to create a week–long bombardment followed by an
offensive attack on foot.
The offensive was planned on a strict time table, as Haig did not trust those who were considered
volunteer soldiers. This quote demonstrates Haig's disdain towards those who did not have
significant military training, ""He tended to disdain and to suspect the motives of people who could
not properly govern themselves." (Johnson). As a result of his dislike towards the volunteer army he
designed the offensive so

Recommendations : Mass Customization Process
Recommendations: Mass Customization
Imagine someone going into a store to buy a suit. The first thing they do is pick out a design they
like or a color that they love. However, it is always a struggle to find the exact one they were
looking for, some are the right color but not the right design, some are the right design but not the
right color. The buyer is instantly pulled into a fritz, the suit buying conundrum has been set in
motion and the mass produced company has created a highly unsatisfactory buying process. The
customer is either forced to buy suit he does not desire, buy one off the internet without knowing if
it fits, or go to a custom tailor while spending heaps of money that most don't possess. The answer?
Become the tailor while reducing the cost. Under Armour has made indications recently they could
be planning a widespread Mass customization process that could lead the way for generations to
come, and we highly recommend they go forth with it. We believe this because we find it will help
Under Armour increase their business globally by encouraging creativity and uniqueness, adding
value to the distribution process, and which will lead to high customer satisfaction.
Through Mass customization, Under Armour will be creating products that are unique to their
individual segments, thus they will be able to delve into their customer's, as well as, their own
individuality when designing and distributing products. According to the article, "The Benefits of
Mass

An Organization Is Super Important
Organization is super important. So when you organize your cables, it'll be very easy for you to find
things and have complete access. It is easier to find things in an organized place than in a messy and
cluttered place. By organizing, you know the exact place where things are at and you would not
have to spend hours finding them. This is beneficial for us because it helps us to save time as well as
energy. Things should be organized in a way so that they are easily accessible. The empty space that
is created with organizing makes the house and or the working area look more spacious. Arranging
cables and putting them into order automatically creates space. Many a times, there are people, who
say they need more space for their stuff. When things are in less or in proper order, you need little
space. A smaller home with the proper arrangement maintenance can be sufficient and satisfying for
you. Cable management not only provides you with a cleaner and more organized space, it can also
extend the life and improve the performance of your cables! Cords that are piled up on the floor or
they hang slack behind equipment are more likely to suffer damage from crushing or sagging.
It is estimated that more than 30,000 non–fatal electrical shock accidents take place each year. The
National Safety Council estimates that in between the numbers of 600 and 1,000 people die each
year from the electrocutions. First of all, check for any loose–fitting plugs, which can cause and be a

Tracy Lawrence Research Paper
Although there are many famous people in Arkansas, Tracy Lawrence is on the top of the list. This
paper will be about his life. Tracy is one of the best country singers that has ever come through
Arkansas, and that's why I decided to pick him. Tracy Lawrence was born in a small quiet town by
the name of Atlanta, Texas on January 27, 1968 ("Tracy Lawrence"). After two years there he moved
to Foreman Arkansas where Tracy sang in the choir and learned how to play the guitar at. It was also
where he spent his whole childhood with his mom Joann Dickens, step father Dewayne Dickens,
and three brothers and sisters. Tracy wrote his first song when he was only four years old. He was so
young that his mom had to write the lyrics for him. That is when his mom knew that he was going to
be ... Show more content on Helpwriting.net ...
When he got out of college is when he left Arkansas for Nashville Tennessee to try to become
famous. While he was up there he worked as an iron worker, an I phone sales man, and attended
talent shows to earn enough money to stay in Nashville while he was trying to get his music career
straitened out. But one Saturday night at a talent show he met Wanda Collier, a music publisher.
Tracy and Wanda got together and started doing some shows and writing songs. One night he was
playing a gig in Bluebird Cafe where he met Wayne Edwards. Wayne secured Lawrence a record
deal with Atlantic Records. After Lawrence settled down in Nashville he married a barrel racer by
the name of Frances Weather–ford, but a year after they were together Tracy got a divorce with her
in 1996. the year Tracy and Frances got a divorce he married another beautiful young woman named
Stacie Drew, but there marriage ended in a divorce as so. In 2000 Tracy married his third wife witch
stuck, and they now have 2 daughters

Product Design Specification ( Pds )
Product Design Specification (PDS)
PDS stands for Product Design Specification and they are a detailed description of requirements,
dimensions and materials that will be used throughout the creation of the green powered car project.
Statement of the Problem
A statement of the problem is statement highlighting the issues that need to be addressed by a
problem solving team; this is used to get the team to work together on a common goal in the
beginning.
The task we have been assigned for this project is to design and manufacture a fully functioning
green powered car which will be raced in the croft formula race. The subject my group has been
given is the electronics, this is a vital part of the car if we want to win due to the fact that ... Show
more content on Helpwriting.net ...
Design– to design a fully functioning circuit (Parallel or Series) which links all of the components
together, we need to make sure that the wires are concealed to ensure that the car looks aesthetically
pleasing.
Testing– to ensure that the circuit works my group and I will need to run multiple tests, we will also
need to decide whether to use a parallel or a series circuit, we will choose a circuit type based on
how long the battery lasts and which circuit has the most power. We will also need to find the most
suitable places to put the components.
Manufacturing– to be able to manufacture and create the designs we have produced, also each part
of the final product should be fully functional and contribute towards the finished product.
The main desired outcome would be to finish the green powered car with plenty of time to spare so
we can test it and therefore hopefully do well in the race. With all of our teams working together and
everybody doing their part I believe that this is a very possible outcome.
The People Involved And Their Responsibilities
Electrical
Team leader for the electrical group is: Jack Dent, his job is to guide the team as well as wiring up
the battery and brake lights.
Lewis Dixon– my job is to help Jack to wire up the battery to the system

Electrical Remodeling
Electrical Repair Huntsville, AL
Remodeling an Older Home
Older homes often offer unique features worth retaining, such as high end fireplace surrounds,
original woodwork, detailed door and window casings, hardwood flooring and other features.
Unfortunately, the electrical system is likely to be one of the safety hazards you should replace.
Even when the condition of the electrical system is fair, it is highly likely to be insufficient for the
electrical load of modern needs. Mister Sparky electricians can provide the electrical repair in
Huntsville, AL your older home may require, and the peace of mind you need.
Safety
One of the primary concerns of an older home's electrical system is safety. In the absence of a recent
electrical upgrade, ... Show more content on Helpwriting.net ...
Why Circuit Breakers Trip in Older Homes
The electrical circuits in older homes were not designed to provide electricity for the needs of
modern homes. The signs of inadequacy in older homes is probably all around you. Multiple
extension cords and power strips connected to a single outlet are a major sign your home needs an
electrical upgrade. Overloading wiring, and especially outdated wiring, is a fire waiting to happen as
the wire overheats. Mister Sparky electricians in Huntsville, AL can provide your older home with
modern, safe wiring and electrical repair in Huntsville, AL you can count on .
Frequently tripped circuit breakers, breakers with signs of overheating, non–functioning outlets and
outlet covers with char on them are additional clues of inadequate wiring and outlets. Switches and
outlets that are warm or even hot to touch, flickering lights, and frequently blown light bulbs are
further clues the electrical system is in dire need of updating before disaster strikes. Mister Sparky
electricians in Huntsville, AL can resolve your electrical issues with electrical repair in Huntsville,

Essay On Wireless Connections
Many households across the United States of America are using internet systems. Wireless internet
connections can found in almost every home. This makes access to the net simpler than ever.
Consequently, the connection is not always the most reliable. Individuals that play online video
games understand wireless connections are not as dependable as a hard wired connection. These
WIFI connections tend to become overwhelmed when there are multiple devices sharing the same
connection. For this reason, the result will be lagging, buffering, or complete signal loss. Many
manufactured devices have capability of wired connection use. Smart televisions, desktop
computers, video game platforms, laptop computers and smart blu ray players are some ... Show
more content on Helpwriting.net ...
This may also be done in the basement or crawl space by boring through the sole plate. Repeat the
following process at the machine the cabling is being installed at. After completing the following,
check the fit of old work boxes in the hole in the drywall. Adjust the cutout if needed. You are now
ready to pull the wiring through the walls and attic or cellar. A pathway free from obstruction will
make the cable pull to termination points simpler. You need to measure from router wall box to
device wall box. Calculate an extra two feet into the length of wire necessary. Cut the CAT5e wire to
the appropriate length for your run using wire cutters. Afterwards, push the wire down through the
wall from the attic or use a fish tape to push up from the basement or crawlspace. Once wire is
detected inside the wall box, it can be pulled through the wall cavity and old work box. Continue by
securing old work box in precut hole by tightening the screws in the corners of the work box.
Equally important to repeat this step for the opposite side of your CAT5e run. It is essential to have
an additional six inches of cable extending out of the work box to accommodate terminations. The
final phase of the project is terminating the CAT5e cables. Popular connections used is a household
are the CAT5e keystone jack and RJ45 connectors. The keystone jack requires 2 ½ inches of the
jacket removed to expose conductors beneath. Removing the jacket is made easier with a radial

Creative Writing: A Brave New World
"It is shameful to be captured, you must only ever calmly face death" ...
A shibboleth spread from day 1; a vastly inhuman, yet immutable affidavit echoed through
generations. Originally, my occupation was to translate for gaijin that resided at Changi, a title
deprecated by senior officers. Like most, I joined not understanding the severity of the plight we
faced. Knowing nothing of the dismay that they inflicted, although my experiences enlightened me
to reach deeper, and delve into an educated frame of mind. Admirable officers have told me tales of
men screaming and climbing the fence in a frenzy, disobeying every order given. Whilst others relay
imagery of guards strangled to death, bleeding profusely with chunks of flesh feed on. A worthy ...
Show more content on Helpwriting.net ...
"Please, mate – you are one of us; you don't have to do this" – still plagues my dreams to this day.
Consequently, upon reflection, I realise that the man was right; unluckily, for him, to truly be one of
them, I had to kill him. The desperado didn't even put up a fight, I simply let the lustrous, white
blade grace his clavicle until myriad dots of blood formed, finishing him off with a clean strike
through the middle of his neck. It was euphoric, the brilliant liquid streaming steadily out of the
gash; complementing the purity of the light sand, by which he lay. But still, I was curious, the kill
had only lasted a minute, not nearly enough to watch the life drain out of his eyes fastidiously. The
glossed over look in the brilliant blue cortex vexed me, taunting my inexperience. Watching me,
dissatisfied, feeding my adrenaline filled rage. The abeyance besieged me, as I pierced into his fixed
face – circling the knife around his eyes, slicing down aimlessly until I hit the corner of his
shrivelled lips, filling his filthy mouth with blood. Alluring eyes hung by their sockets, face layered
with the various shades of red; the ground was unrecognisable, blood pooled up to my ankles. After
examining my work, I started to hastily clean the knife – it had just found its purpose– but it felt
heavier in my pocket, now carrying the weight of a kill. The body

FIFA 18 Essay
Last year, FIFA 17 was the best selling game on the PS4 with over a whopping 10 million units sold
worldwide. Not only did it perform exceptionally well on the PlayStation, on all platforms, it came
second to Pokemon Sun/Moon on the 3DS. Unquestionably, EA's FIFA series is huge.
It's fair to say, certainly by now at least, EA Sports know that they're going to top the sales charts
each year. While it's possible this may cause complacency, EA never seem to rest on their laurels.
Although last year saw significant refinements from FIFA 16 to 17, there certainly isn't as many
wholesale changes in FIFA 18. However, subtle improvements to the gameplay, as well as new
features in the Career Mode means FIFA 18 is EA's most complete FIFA to date. ... Show more
Pleasingly, although not perfectly, FIFA 18 stays true to the style of play certain teams are known
for. Though one can argue that this was true of FIFA 17 and to a degree, previous installments, the
2017/2018 season is still in its infancy and where Liverpool play a similar way to last season, Man
City's attacking style is slighly different with FIFA 18 mimicking it rather well.
The care for attention to detail is also true to that of individulal players. While it would be
impossible to uniquely program thousands of players individually, the bigger name, as well as some
lesser known players, all have their own style of play. Of course, Ronaldo and Messi play like their
real life counterparts but it's refreshing to see a player like Matt Ritchie behave in a similar fashon to
real life.
While tactical set ups and individual players are sound, as far as AI behaviour goes when adapting
during a match, I haven't noticed too many differences between FIFA's 17 and 18. However, one
noticible difference involves how teams react when falling a goal or two behind.
One gripe I've always had of FIFA games is how the AI reacts to going a goal or two down early on.
Teams tend to go kamikaze and pile men forward prematurity leaving gaps in defence. This
behaviour is common at the latter stages of a real match but not so much early on. With FIFA 18,
teams do seem less partial to keep throwing men forward nonsensically when falling behind, now
only doing so when the

Chicken Run media essay
Chicken Run media essay
Wallace and Gromit eat your heart out there's a new chick in town! Chicken Run, directed by Peter
Lord and Nick Park is a sensational clay animation. A new piece of cinematic excellence to be added
the title 'a classic', with its side–splitting humour, astounding action and stunning stop motion
Chicken Run is a film well worth watching. I can guarantee you won't be disappointed! Enough
about how good the film is; what is it about?
Chicken Run is an all round great film for all the family. Ever wondered what chickens dream
about? More chicken feed? A bigger coop? Not in the case of head chicken Ginger; all she wishes
for is freedom for all the chickens at Tweedy's ... Show more content on Helpwriting.net ...
This gives a valiant quality to the film and makes the audience feel good, too! The moment the titles
have finished, the music descends from a triumphant melody into eerie gloomy drone. Combined
with the music we are shown a crisp low angle shot of a full moon surrounded by darkness.
Gradually the camera zooms in from the sky and we see an insert shot of the barbed wire fence
giving us an impression of imprisonment. This is followed by an establishing shot of Mr. Tweedy
and his dog. In his hand he is holding a torch and patrolling the area, as they walk towards us we can
hear the 'pitter–patter' of the dog's feet. Followed by, an extreme close up of an ancient rusted
padlock (obviously keeping the fence locked). We are further focused on this as Mr. Tweedy shines
his torch onto the padlock and checks it is securely locked, as he drops the lock we hear the 'clank'
noise it makes as it hits the fence. The focus on the lock reinforces the theme of imprisonment given
previously from the barbed wire. It is also an important element to the film as the audience has to
believe that it is evil to keep chickens locked up. The music has maintained its ominous
characteristics. All these presentational techniques have been used to create the idea that something
important is imprisoned inside the fence; thus

Different Types Of Media That Can Be Used For Connect...

Recommended

Recommended

More Related Content

Similar to Different Types Of Media That Can Be Used For Connect...

Similar to Different Types Of Media That Can Be Used For Connect... (20)

More from Stephanie Roberts

More from Stephanie Roberts (20)

Recently uploaded

Recently uploaded (20)

Different Types Of Media That Can Be Used For Connect...