Basically when communication due the local tools or systems seems impossible, it works really better. Also this system can be equipped with the further switching function in order to operate the machines by a remote control technology during the set up operations. These remote emergency shutdown systems are designed specifically for industrial plants and they also eliminate the costly hard wiring of manual emergency shut-down switches.

1. BASE ENGINEERING INC.
Fuel Transfer Automation

2. BASE ENGINEERING INC
BASE systems can be found in military, petrochemical, aviation, and
construction service. The company specializes in systems for extreme
environments and hazardous locations and supplies many new truck
OEM’s and major fleets. We thoroughly understand the special
requirements of the Gas & Oil industry and our systems provide safe,
reliable wireless control.

3. WIRELESS REMOTE CONTROLLERS FOR INCREASING JOBSITE SAFETY
Modern wireless remote controllers designed by the manufacturers are generally
used for the industrial sectors in order to control the gigantic machines. Use of
modern radio remote control technology has ensured the security of workplace
and at the same time increased productivity in a great extent. The radio remote
controls used in the industrial sectors are equipped with high frequency transmitter
enable to send signals from a great distance. At the same time the powerful
handheld receiver is also able to catch the tiniest of signals. All these things have
made the remote controls a useful tool for controlling gigantic machines in the
modern industry.

4. DRIVER AUTHORIZATION SYSTEM – A WONDERFUL
INNOVATION OF REMOTE CONTROL TECHNOLOGY
Driver Authorization System (DAS), equipped with the modern remote control technology,
are specifically used for Bulk Fuel delivery Trucks. The system actually prevents
unauthorized vehicle drive away with or without engine running. Depending on the
customer’s application the DAS can vary. However, the basic application will be the same.
Mainly a DAS protects the vehicle from unauthorized engine start or movement depending
on the customer's application.
A Driver Authorization System designed by the reputed manufactures includes the
following aspects:
•A keypad unit is available with hidden enclosure screws
•There will be also a sealed parking brake low pressure switch
with DOT quick connect T fitting
•Sealed engine kill relay is available
•Proper installation guide is supplied

5. ELECTRIC OR HYDRAULIC CRANE REMOTE CONTROL
The modern crane remote control used in the industrial sectors greatly improves
jobsite safety by providing the operator the safest vantages point for effective
control of the crane. This is a one-man control radio remote system that eliminates
the need of any second person stabilizing the load while guiding its placements.
While using the system the operator has the simultaneous control to move around
the work area while setting the load precisely into position.
The Electrical or Hydraulic crane control wireless remote controllers apply the
latest innovation in the modern radio remote control technology. The system greatly
reduces all types of risks during the function. It also provides great level of security
while using for the large cranes.
The handheld transmitters are available with up to twelve radio remote control
buttons. The remote control buttons are generally specified by the customer only.
The transmitter of the crane remote control systems is very powerful and they can
work within a great level of frequency. The frequency of these wireless remote
controllers is between 902-928 MHz FHSS. Additional 433.92, 869.7 and 2.4GHz
frequencies are also available. The transmitter can work within a transmitting range
of 100mW. With the 56 bits DES encryption key method of transmission, the
system can work better than the normal service cranes.

6. INDUSTRIAL WIRELESS CONTROLS FOR AIRCRAFT REFUELING
CONTROL
Wireless Deadman series Trigger switch
industrial wireless controls are developed
specifically for industrial applications
requiring positive operator-to-machine
contact. This remote control technology
enabled wireless trigger switch is generally
used to send Radio Frequency commands
signals of the pump. While using the
system the operator is unencumbered by
cables and wires normally used in
'deadman' fueling operations.
The system also incorporates a secure frequency hopping spread spectrum
radio link which is virtually immune to outside electrical or RF interference. FHSS
technology enables the system to provide interference free control. While using
as an automatic refueling system the Deadman series industrial wireless controls
can prevent all types of electrical and radio interference. All the operations will
fail safe (shutdown) with any loss of signal from transmitter. The rechargeable
transmitter delivers 30hrs of continuous use between charges. 12/24VDC
charger is supplied by the manufacturers.

7. THE MODERN AGE OF INDUSTRIAL WIRELESS AUTOMATION
In this age of industrial automation using radio remote control is not a difficult task for the operators.
Industrial wireless controls has made all the works regarding gigantic machines easier and the
productivity is also increased. Most of the industrial wireless remote controls used in engineering
sectors are designed with high power technology enabling them to handle all the machinery works in
industrial sectors. They reduce labor cost in high extent and also reduce the time spent behind the
controlling of those gigantic machines by manpower. At the same time they also eliminate accidents
in work field and increase jobsite safety.
Radio Remote Control Products:
Most of the industrial machines can be controlled by using high power radio remote controls. These
industrial radio remote controls are mainly used in systems that need interest free control. There are
different types of remote controls that are used in industrial purpose. Some of them are Bulk Truck
Theft Prevention System, Transport Leak Detection System, Automatic Refueling Controls,
Proportional and Non-Proportional Hydraulic Radio Remote Controls, RFID Wireless Remote Control
Systems, Aircraft Refueling System, Process controls and many more.
Functionality:
These wireless industrial remote control systems are mainly equipped with two sections. Handheld
transmitter and a receiver control unit. The transmitter of these industrial remotes has normal
frequency range of 902-928 MHz and optional 433.92 MHz, 869.7 MHz, and 2.4 GHz are also
available. The transmitter has normal power of 100 MW.

8. THE TECHNOLOGY USED IN REMOTE CONTROL TECHNOLOGY
Wireless remote controllers actually use radio waves to send commands to different devices.
These industrial wireless controls are generally used for industrial automation. They are the
best for controlling the gigantic machines. They are actually used to get the interference free
control. The electromagnetic waves of different frequencies are emitted through antennas
and picked up by the radio receivers.
The wireless remote controls are equipped with two main control parts. One is the transmitter
which is generally very powerful and can send signals within a great range. Another section of these
radio remote controls is the handheld receiver control unit which catches the radio waves sent by the
transmitter. Therefore, when an operator presses the button of the radio remote, the radio signal is
sent from the transmitter unit to the device that you want to control. The receiver unit is installed in
the device which decodes the signal and obeys the command accordingly. One of the amazing
aspects of these radio remote controls is that they can send signals from greater distances. Generally
the radio waves can travel as long as 100 feet to reach the receiver.

9. WIRELESS REMOTE CONTROLLERS WITH ADDITIONAL SYSTEM
ACCESSORIES
Remote control technology has moved a long way along with the modern
innovation. The modern radio remote control systems are widely used and they
are made by using the latest technology. Today’s wireless remote controllers are
not only used in opening garage doors or playing music systems. The use of
radio remote control systems has expanded to its highest capacity.
These modern wireless remote controllers are
mainly used in industrial sectors to control the
gigantic machines. The gigantic machines are
actually needed to be handled with
interference free control. The modern radio
remotes are equipped with FHSS or
Frequency Hopping Spread Spectrum
Technology that enables them to prevent all
types of electrical and radio interference.

10. UTILIZE TRANSPORT LEAK DETECTION SYSTEM WITH
REMOTE CONTROL TECHNOLOGY
Now the remote control technology has filled
the gap in a lot of businesses that required by
allowing them to completely restructure the way
that they work by changing the way that they
employ staff and also how they run their
industrial system. Wireless controls have
greatly changed the IT after sales market and
also changed the way that administrators and
technicians.
BASE Engineering is a pioneer in developing industrial remote controls. Our industrial
remote control technology and systems are equipped with powerful industrial wireless
transmitter and they have been employed around the globe to increase job safety and
productivity. We design and manufacture extremely rugged industrial wireless control
and solutions for most industrial applications such as process controls, industrial
petroleum, bulk transport, tank truck equipment, tank truck loading, crane service,
hydraulic pumps and many more.

11. INDUSTRIAL RADIO REMOTE CONTROL AND
ACCESSORIES
In this modern era due to different innovations in the field of technology,
selecting the best remote control technology is very important for one’s
everyday life. For this reason, this is important that you look into the
different factors that affect the quality of use of remote controls before you
invest in a remote control system. These technological derived products are
needed so we can keep up to date with the most recent changes happening
around us or in the world wide market.
BASE Engineering is a pioneer in developing remote control technology.
We design and manufacture extremely rugged industrial radio remote
control and solutions for most industrial applications such as process
controls, industrial petroleum, bulk transport, tank truck equipment, tank
truck loading, crane service, hydraulic pumps and many more.

12. INDUSTRIAL REMOTE CONTROL SYSTEMS FOR LPG AND REFINED
FUELS
In this modern era, remote control technology is a device that used to control a system or
machine automatically. This is really a great innovation of human being. Now with the
assistance of industrial remote control systems now one can operate a machine even
from a distance. After the innovation of modern technology it has started gradually.
Today the makers are making the machines and wireless systems with powerful energy.
With these modern wireless remote controls now one can control complex electronic
system or even a gigantic machine too. At the same time, the modern device is equipped
with powerful transmitter they can operate a machine even from a great distance.
BASE Engineering is a pioneer in developing industrial radio remote control systems. Our
industrial remote controls are equipped with powerful industrial wireless transmitter and
they have been employed around the globe to increase job safety and productivity. We
design and manufacture extremely rugged remote control technology and solutions for
most industrial applications such as process controls, industrial petroleum, bulk transport,
tank truck equipment, tank truck loading, crane service, hydraulic pumps and many more.

13. CRANE SERVICE INDUSTRIAL RADIO REMOTE CONTROL WITH
MODERN INNOVATION
Crane service industrial radio remote control is a device that greatly improves
jobsite safety by providing the operator the safest vantage points for effective
control of the crane. This is a one-man control remote control technology that
virtually eliminates the need of a second operator in order to stabilize the load while
guiding its placement. While using the system the operator has a full freedom to
move around the work area while setting the load precisely into the position.
The transmitter of the Crane Service Hydraulic Truck Remote Control is really
powerful. The transmitter has a frequency range from 902MHz to 928MHz. Optional
433.92, 869.7and 2.4GHz, transmitter frequencies are also available. The
transmitter has a normal power of capturing signal from 100mW. The remote control
technology enabled transmitter can work with a 56 bit DES encryption key
transmission method of transmission. An internally protected ‘on card’ PCB mounted
antenna is also available.
BASE Engineering designs some great industrial radio remote control systems
for different engineering and commercial purposes. Since 1996 over 50,000 BASE
systems have been employed around the globe to increase job safety and
productivity. As a result of this design effort we have the confidence to offer a four
year, no hassle, and replacement warranty on every product we manufacture.

14. DEADMAN SERIES TRIGGER SWITCH INDUSTRIAL WIRELESS
CONTROLS
Deadman series industrial wireless controls are developed specifically for industrial
applications that require positive operator-to-machine contact. This unique Trigger
Switch radio remote control is an innovation of modern remote control technology. It
also includes a wireless trigger switch is used to send RF command signals to the pump.
The system includes the following features:
•'Safety Timer' software available to limit switch closure duration prior to automatic
shut-off
•This feature requires periodic trigger pulse by operator to maintain receiver 'on'
condition
•Up to eleven other command functions available per customer requirements
•Modular quick-connect components allow for easy installation and field service
Pre-wired solenoids are available for Pneumatic, Hydraulic, or Hose Reel control interface
For more details please visit our website http://www.baseng.com/.

15. CONTACT US
At Base Engineering, we take pride in serving our customers 1 on 1. Our business truly
depends upon the satisfaction of our customers and we strive to provide you with the most
efficient service.
If you'd like to learn more about our organiztion or learn how we can be of service to your
organization or have any other queries, Please feel free to contact us. Just fill out the form
below or email us or give us a call. Thank you for your interest in BASE Engineering and we
look forward to learning more about your organization.
Address
600 Rothesay Ave
St.John, NB,
CANADA, E2H 2H1
Phone & Fax
Toll Free: 1.800.924.1010
Tel: 1.506.635.2280
Fax: 1.506.635.2281
Sales:
sales@baseng.com
Technical Support:
d.eavis@baseng.com