One of the most important thing for warehouse owners is the capacity to increase space in their available warehouse so that they are able to store more goods and increase their profit. This is why the warehouse owners are always opting for various types of racks for their warehouse. The racks play a big role in increasing the availability of space in a warehouse. However, there are certain safety factors that shouldn't be ignored while installing racks. Go through the slide to know the things that should not be ignored for rack safety.

1. Things that Should Not be
Ignored for Rack Safety

2. One of the most
overlooked areas of
warehouse layout is the
safety of the racks which is
required for guarding the
people and the products.

3. Rack systems should be
inspected by a qualified
rack system inspector at
least once a year, more
often if there is frequent
damage.

4. Also, the results of the
inspections should be
documented and
maintained for future
reference.

5. While a visual inspection
will show obviously
damaged it is very
important not to ignore a
few simple steps for the
safety of the racks.

6. Do not overload the rack beyond
its capacity

7. The rack capacity should
be provided by the rack
manufacturer and hung in
a clearly visible place at
the end of each aisle.

8. These sign boards show
both the load capacity
and approved beam
spacing configuration.

9. Use appropriate
safety accessories
throughout the rack
system

10. There are a number of
accessories that can be
used along the racks to
provide additional
safety in the warehouse.

11. Safety netting will prevent
items from falling off the rack,
column protector and end of
aisle guards protect uprights
from forklift damage.

12. Ensure that loads are
placed evenly on the rack
system

13. The cart drivers should
be trained to place the
pallets correctly on the
frames so that there is
no disorder and
appropriately unitized

14. When loading onto wire
deck, make sure the
pallet is also supported
by the beams.

15. Consult a
qualified engineer
before making any alterations to
your rack system

16. Each rack system is
designed for a very specific
application and even a
slight change in beam levels
can cause a system to
become unsafe.

17. Any alterations to the rack
system must be reviewed
and approved by a qualified
rack engineer to ensure
safety.

18. Repair damage
immediately

19. Don’t assume that
because the rack has not
failed yet, the damage
to the system is not
important.

20. Rack failures can be
sudden and
catastrophic, employee
life and safety must be
front and center.

21. Not to Ignore

22. Make sure that everyone in
the warehouse is aware of the
importance of safety and is
properly trained on how to
move materials in and out of
the rack system.

23. A regularly inspected
and maintained rack
system will provide
many years of safe use.

24. http://racksourceinc.com/