The Final Deployment Model Is Like No Other

The Final Deployment Model Is Like No Other
The final deployment model is like no other. It is called a hybrid cloud deployment. Unlike being
only available to the public or to a specific organization, a hybrid is a combination of the others. The
cloud starts out as separate clouds, and is combined by standards and technology that manipulates
the clouds to satisfy the needs of each (NIST). An example is like a hybrid course where the
material is divided among online and in class, and each load is split based on how much time is
allocated to each. All things considered from models, to characteristics, to deployment models one
must choose wisely and understand how each combination works and how it would work for the
intended purpose. Among most things, there are upfront cost, and ... Show more content on
Helpwriting.net ...
Alternatively, if it resides in–house then the IT resources would need to remain and maintain the
cloud. There again lies the decision of how the company would need to allocate the cost and
resources to move towards cloud computing. Once it is known how the upfront cost and location
will be handled, then comes the accounting portion for the upfront cost for the cloud. Just like lease
accounting, there are certain criteria that must be met before knowing whether to capitalize or
expense the cost, and where to place on the financial statements. To capitalize the cost, the consumer
must meet two requirements. First, the consumer must be able to obtain ownership of the cloud
(Conaghan). Secondly, the consumer must be able to run the cloud on their own hardware, or said
consumer can contract another host (Conaghan). If the consumer meets these requirements, they can
capitalize and consider it a service contract. Once considered as a service contract, the consumer
will then depreciate the software and label it as a fixed asset on the balance sheet (Depth). This will
allow for the consumer to expense over the life of the cloud. Conversely, if the two criteria are not
met the consumer must use the expenditure method. The expenditure method requires that all
upfront cost must be expensed at once (as incurred), and reflect on the balance sheet as such
... Get more on HelpWriting.net ...

Case Analysis Of Cloud Networking
Today, large corporations have employees in several locations around the world. It is imperative
each employee can access and update important information to provide the most up to date data to
the rest of the organization. Cloud hosting provides a path to ensure open communication channels
for an organization to adequately operate on the global scale. Crowd hosting allows the use of more
than one server to reduce downtimes in the case of a mechanical malfunction. An organization can
sign a services agreement with a cloud hosting vendor to secure access to the technology. As with
any purchase, business leaders must ensure the chosen vendor is the best option for the organization.
For the purposes of this decision, I have chosen to ... Show more content on Helpwriting.net ...
HostGator provides an alternative hosting opportunity for prospective organizations.
Founded in 2002, HostGator has been in the hosting industry for a long time. The company has
consistently grown since its humble beginnings, and now has offices in several countries around the
world in order to continually expand their customer base. "Aimed primarily at the semi–technical
user, Host Gator's flexibility is their strong suit"(Frankel, 2017, para 3). This distinction allows more
tech–savvy businesses to pick and choose desired features to ensure the final product is pleasing.
"HostGator has near limitless options and control, however, they require a little more knowledge
than beginner–focused web hosts"(Frankel, 2017, para 4). HostGator has developed an outstanding
reputation in the hosting community for its performance. The company offers reliable services at
competitive prices by affording organizations the flexibility to choose the services needed instead of
simply offering rigid packages. HostGator boasts an extremely advanced datacenter to ensure
redundancy in their server network to prevent downtime. They have incorporated a level of
redundancy that prevents single point of failure in order to deliver services as advertised. While
HostGator has a great reputation of performance, it must perform well in key performance indicators
(KPI) identified by prospective clients to turn them into customers.
It is important for an

Role Of The Power Industry And The Services It Provides Essay
The main goal of DTL Power's cybersecurity strategy is maintaining data integrity and availability
of resources while ensuring that all systems and facilities exceed the industry standards. This
strategy is critically important due to the nature of the power industry and the services it provides.
The implementation of the controls falls in line with the cybersecurity strategy designated by
leadership. The hacktivist and virus attack were able to successfully penetrate our system causing
downtime and affecting system integrity. Cyberattacks are becoming more frequent and evasive
therefore it is imperative that strong security measures be enforced to not only secure network
resources but to prevent unauthorized access.
In order to prevent unauthorized access to DTL Power's data, the cybersecurity team has selected
strict filtering controls to secure the firewall with the strictest configurations to better control traffic
traversing the network and disabling all unnecessary open ports. A firewall with strict filtering rules
detects intrusions and prevents unauthorized access by policing the traffic and access requests to the
firewall. By disabling firewall ports that are not necessary for normal communication, attack
opportunities are greatly reduced. Devices use specific ports for communicating so it is important to
conduct a thorough inquiry into which ports need to remain open. An attacker can take advantage of
open ports, gain access and create a backdoor for

Differences And Similarities Between Frankenstein And Grendel
Frankenstein's Monster along with Grendel are both monsters that society ignores their existence
and both of their societies finds them to be a distress. Their societies doesn't enjoy them because
they are not like the rest of society. Both the Monster and Grendel aim to find their place in society
along with their purpose and reasoning to life. Considering their happiness comes at infrequent
times, both eventually accept their role into society by coping with themselves and their inner traits
to be loyal with themselves, continuing to be more intelligent and be on the correct path. Just about
every human being that has every existed has wondered to themselves, "What is the meaning to
life?" "Why am I here?" Grendel and the Monster are no ... Show more content on Helpwriting.net
...
Up until the twenty first century, gays were often the outcast of modern society. As our society gets
more and more secular, as it should, there will be even less outcasts of society. In the Monster and
Grendel's time, they were the outcasts of their society for good and bad reasons. Both of them would
get judged and scare people on first sight. "All men hate the wretched" (Shelley 128) It's amazing
the negative attention a peasant would get where a king would not. A popular person will dodge
harassment from society where a not so popular person would not. What a peasant would do is not
appropriate for a king to do. The reason I say this is, the only difference between acts of violence
and courageous acts is the matter of who commits them. "The incitement to violence depends upon
total trans valuation of the ordinary values. By a single stroke, the most criminal acts may be
converted to heroic and meritorious deeds". (Gardner 117) It's sad to say, but society can oppress the
undesirables. "Murder and mayhem are the life and soul of revolution." (Gardner 119) All
throughout time, the history books were written by the ones in control. Who were the ones in
control? The ones that murdered until they themselves got murdered due to a revolution. Society
only condemns the unfortunate, but unfortunates attract each other. "We may not part until you have
promised to comply with my requisition. I am

Chain Elongation In The Escalators
For this particular project profit is not a concern, but rather the concern is to increase customer
satisfaction. This is going to be done by having predictive maintenance on the elongation of the
chain in the escalators, rather than reactive maintenance. Currently, BART is reacting to the effects
of chain elongation on escalators which causes maintenance to be rather expensive but most
importantly inconvenient for customers. BART is currently doing this because some of the
escalators are older so they do not have any automation associated with them. At this moment, when
an escalator breaks down due to chain elongation there is major downtime to repair it because it is in
need of emergency maintenance. With emergency reactive maintenance an

ATOM Risk Management Paper
Risk management needs to be an ongoing process, occurring throughout the project, because of the
ever–changing aspect of risk. ATOM process includes both major and minor reviews to maintain the
vigilance required when dealing with project risk. Major reviews are designed to occur at key points
in the project to review the status of the risks and to evaluate the actions taken. Reviews evaluate the
effectiveness of the risk plan and make changes to that plan to keep up with the changes in the risks.
The major review is scheduled for major milestone points in the project, identified as part of the
risk. management plan. The risk register should have all the current information about the risks
when the review begins. In addition, the project manager will provide information with regards to
the project status and the review point. The risks will be reviewed with regards to their status,
changes in probability or impact, and the actions described for the risks. Any new risks will be
assessed and actions will be identified. Because risk needs to be monitored throughout the project
and not just at major points, our process would contain provisions for minor reviews too. Minor
reviews are designed to fill the gap between the initial risk assessment and the major review and to
be ongoing throughout the project. It carries out the reviews of the major review on a less–detailed
scale. After a review of both, an updated risk register is produced. Updates to the project plan to
better manage potential risks may also be an outcome of the review. We will have risk review
meetings also. Performance measurement system for our project would track the following metrics:
... Show more content on Helpwriting.net ...
– Project cost as per the budgeted amount or not using Variance

Disconnect Of Communication By Employers
Disconnect of Communication by Employers: Evaluating the Aftermath of Technical Failures
Businesses have become extremely reliant on technology over the past few decades. Processes from
accounting to marketing to board meetings are done using special applications and software
developed to improve productivity as well as to shrink the distance between office locations. With
the invention of computers for ease of day–to–day functions, to creating a global network that
connects people around the world in seconds, the success or demise of a corporation can be
determined by its digital components. An efficient, high–tech structure maintained by well–educated
and skilled associates gives an organization the ability to perform more effectively, nationally and
internationally. When system outages occur, tasks executed on the network cannot be completed,
halting productivity and potentially costing the company financial loss. The speed of recovery in
these instances is crucial, but so is the implementation itself. Inadequate handling of procedures and
mediocre responses from leaders in a crisis situation involving network/technical failures can wreak
havoc on an organization, negatively impacting public image, corporate profits and trust of
associates.
From the time an outage begins, the business is at risk of adverse side effects beyond normal
production. One of the most important initiatives of a company is to create a strong brand that
produces a profit. Implementation

Export data into external source (m3)
Explain the Impact of Organisational Policies on the Troubleshooting and Repair Process (P1)
Referring to the policies related to the College's network. Produce an audio recording for the
Network manager to explain the impact of their organisational policies on the troubleshooting and
repair process. Introduction In this documents, I am going to be explaining the impact of
organisational policies on the troubleshooting and repair process, I am going to be talking about the
organisational policies, such as considerations e.g. security, costs, systems downtime, disruption,
resource allocation, prioritisation, contractual requirements, trend analysis, escalation procedures,
documentation, reporting, contractual legal issues. ... Show more content on Helpwriting.net ...
Resources should be well balanced so if the resources are not needed they shouldn't been used.
Prioritisation The company should prioritize some of the aspect when performing repair as they
might be more important and they should be repaired first. For example if network is down and at
the same time printer is not working. The person that perform repair should concentrate on repairing
network instead of printer as without network printer would be useless. Contractual Requirements In
a company, the support team staff would be required to work shifts that will provide coverage for
the employees when the offices are officially opened, they will also need to provide extra time in the
evening and weekends, where they will carry out the essential maintenance which may have to
involve some downtime. The hours that an employee will have to work will be set out for them in
what is called an employment contract. They will be limited by the EU legislation and some other
regulations such as working time regulations, which will provide the basic right and protections
such as: A worker can be required to work at most an average of 48 hours a week (though workers
can choose to work more if they want to). For night workers there is a limit of an average of 8 hours
worked in 24. Night workers are entitled to receive free health assessments. All staff are entitled to
11 hours of rest a day and to one day off each week. When

Operational Failures Occur Within Organizations Across All...
EXECUTIVE SUMMARY – Operational failures occur within organizations across all industries,
with consequences ranging from minor inconveniences to major catastrophes. How can managers
encourage frontline workers to solve problems in response to operational failures? In the
manufacturing industry, the setting for this study, operational failures occur due to an internal
constraint which is the over use of one major machine. Using data reported from both the production
and sale teams, the researcher found that problem–solving in response to operational failures is
influenced by both the downtime posed by the constraint and the extent to which the organization
incurs a lost. Findings can be used by the organization to increase the management awareness of the
extent to which downtime affects the operation process and ways by which improvement can take
place.. Key concepts include: Operational failures that trigger more financial and liability risks are
associated with more break down of the machine. By communicating the importance of problem–
solving and engaging in problem–solving themselves, line managers can stimulate increased
problem–solving among workers. Even without managers ' regular engagement in problem–solving,
communication about its importance can promote more problem–solving among workers. By
explaining some of the variation in responsiveness to operational failures, this study empowers
managers to adjust their approach to stimulate more problem–solving within the

Productivity Improvement in Screw Type Biomas Briquettes...
Biomass densification by screw briquetting produces uniform, dense and durable solids desirable for
gasification, process heating, power generation and other heating applications which are currently
run by coal. Due to high wear rate, the screw and mould used for forming the briquettes deteriorate
leading to regular production stoppage and considerable down time losses. Hence Indian
entrepreneurs are apprehensive to adopt screw briquetting technology in spite of its potential. In this
work improvement in productivity parameters are tested for predetermined replacement of screw
before considerable damage is done. They were found to be significant and aiding quality briquette
output and smooth operation which could aid in improving ... Show more content on
Helpwriting.net ...
If the excess biomass materials are compacted to briquettes near their source they can be transported
to longer distances, stored for more duration unaffected much by humidity [9] and put into versatile
uses. There are many methods of densification available and screw briquetting is one good choice
for producing high quality briquettes, a sample of which is shown in fig 2. These types of briquettes
have uniform dimensions, high calorific value, less moisture are desirable feed stock for gasification
systems, process heating and power generation applications. But the screw briquetting technology is
having its own shortcomings like, the life of its parts like screw and mould are very short due to
high wear rate, need of skilled labors to run the machine and wastage of energy for heating the raw
material and the mould. The heating process is needed to eliminate moisture and volatile matters and
to melt the lignin content in the raw material which acts like a binder. The quality of briquettes
produced justifies the use of skilled labor. Due to high wear rate of screw and mould particularly the
screw which have very short life about 4 to 15 hrs [10] there are regular stoppages of production,
reconstruction of tools and wastage of output.Research works are going on all over the world in
designing compact briquetting machines,

Case Study Microlite S.A.: the Pan-Orient Decision
Case Study Microlite S.A.: The Pan–Orient Decision
Abstract
Microlite S.A. which is located in Brazil was the largest producer of batteries in South America with
a mighty 55% share of the Brazilian battery market. Top Management had decided to shut down all
but one out of three of the dry cell battery factories in Guarulhos. This opened up the chance for
Luiz Pinto, manager of Microlite's battery factory in Jaboatão, to take over this market share and do
further investments in his company.
This report is going to describe three basic different proceedings on how he can increase his
production. Take over the old machines from the factories in Guarulhos, invest in new machines
from Pan–Orient or come up with new ideas how the current ... Show more content on
Helpwriting.net ...
Approach
These three approaches have all their advantages and disadvantages and allow a great number of
combinations. Our idea is to implement a three–step solution.
The first phase of our solution is concerned with improving the current situation and overcoming the
shortfall in a fast and inexpensive way. According to exhibit "current situation" we can identify two
bottlenecks in our current production process, "Add Paste to Cup" and "Inspect Carbon Rods".
Those are below the necessary capacity of 540 units/min. To overcome this, we suggest adding one
additional machine ("Add Paste to Cup") from the factory in Guarulhos to reach a overall capacity
of 540 units/min and engage two more persons, one to operate the additional machine and one in the
"Inspect Carbon Rods"–operation (exhibit alternative II).
The second phase, after the installation of the machines from Guarulhos, has the goal to improve the
current production to an extend that:
– Average Downtime shall be reduced by 30%
– The quality of the batteries shall be increased with the long–term objective of eliminating the final
electrical output test
To reach this goal, first all the processes in the plant need to be scrutinized. Second, problems need
to be identified, analyzed and solved in the manner of Kaizen. The third objective is, to implement
quality control on the running belt. With these measurements we're converting the factory step by
step from a batch process to a JIT production.
The

Business Impact Analysis Paper
Databases – Implement High Availability for Mission Critical Mission critical databases support
services that have an immediate, direct, and significant impact on revenue, goodwill, health and
safety, and regulatory compliance. They require more attention than other systems. I will be
discussing the following topics in this paper 1. Understand why implementing high availability for
mission critical databases is so important to IT's success. 2. Learn why true availability relies on
people, process, and technology. 3. Understand database methodology and approach to
implementing high availability. Current Situation: For most systems, efficient backup/recovery
processes and technology will meet recovery time (RTO) and recovery point ... Show more content
on Helpwriting.net ...
For example, an Info–Tech survey found that a BIA has a significant impact on setting appropriate
recovery time objectives (RTOs) and appropriate spending. Mission critical system uptime depends
on people, process, and technology. If people and processes are ignored, the system becomes
significantly more vulnerable to human error – the number one cause of downtime. My Research
Recommendation: Integrate these principles when planning for high availability Step 1 – Take a
proactive approach to high availability. Attention to and investment in high availability tends to
happen reactively after system failures. When you proactively address high availability, you'll give
yourself time to holistically approach HA and address people, process, and technology gaps. Step 2–
It is the responsibility of IT to ensure the business has been informed about the options and costs of
higher availability. Business users can't assess time impact of downtime in an information vacuum.
IT team SMEs – often acutely aware of the impact of system downtime – should take a first cut to
assess the impact of downtime, achievable recovery times, and options to improve availability Step
3 – It is the responsibility of the business to decide what projects to fund. Business stakeholders
must decide whether to fund a project, not the IT team. It is up to the business to make an informed
decision about the availability investments

Safeway Compliance Report
At the request of Teamsters Local Union 439 an audit of the production standards were performed at
the Safeway facility located in Tracy, CA. during the week of March 13, 2017. The purpose of the
audit was to determine if the updated engineered standards are fair and reasonable based on sound
engineering principles and guidelines. The tasks studied were Perishable Selection and General
Merchandise Selection.
The production standards for the area and tasks stated above were evaluated in the study. All
workers observed were informed of the purpose of the study and were instructed to follow
documented methods and procedures while performing their job tasks.
II. Audit Results
1. Perishable Selection: ... Show more content on Helpwriting.net ...
Since the event occurred due to carelessness on the part of the employee this individual would not
receive delay time for re¬assembling the pallet. The trailing selector as a result of the incident
would be able to request delay providing they assisted the first selector in clearing the aisle.
An order selector is found to have missed an item on a selection audit and is called up to complete
the order. The time it takes to get the missing case would not be approved delay. If however, when
arriving to where the assignment is being audited the selector finds that the case was actually on the
pallet and it was missed by the auditor, delay time would be provided.
Use of Downtime Slips to track delay requests: o Attachment B – Downtime Slip n Rules and
guidelines covering use of the Downtime Slip method:
Blank Downtime Slips are placed in a convenient location where employees may easily and quickly
retrieve them.
Employee completes the Downtime Slip by filling in all required information. The "Approved By"
line will be left

Debate Over Stimulated And Overly Connected
Over Stimulated and Overly Connected:
It Maybe Time to Unwind and Disconnect
Jacquelyn Gentry
Eastern Kentucky University
Over Stimulated and Overly Connected:
It Maybe Time to Unwind and Disconnect For many parents; such as myself, it is not uncommon to
have a different activity to drive your child to each night. As a parent of a teenager, it is not
uncommon to see his loving face aglow from the light of his cell phone. In today 's age there is an
incessant need to always be busy our selves in fear of being perceived as lazy or perhaps
unsuccessful. A parent who choses to not engage their child in multiple after–school activities is
thought to be disengaged or uninterested in their child 's development. A child who does not get to
be involved in organized activities can easily feel left out at school when everyone else is talking
about their little league team or dance class. This drive to always be doing something transfers over,
as these children grow into their teenage years. As teenagers, they become very socially engaged via
social media. They develop an overwhelming need to be in constant contact and socially accepted
by their peers. To cut a teenager off from their device is to socially exile them from the world. In
other words, it is considered "cruel and unusual punishment". Back in the day, to go to one 's room
and have "down time" was normal and okay. It allotted you the opportunity to unwind, think about
your day, come up with possible resolutions.to

Microneedling For Rosacea Case Study
Take Optimal Microneedling For Alopecia & Rosacea Treatment
Summary: Everyone admires spotless skin & beautiful hair as they symbolize a great personality.
Microneedling for rosacea & alopecia is the best treatment to get rid of scars & accelerate hair
growth.
Due to the impact of harmful chemicals, unhealthy lifestyle, stress, and lack of care, hair loss
became a common problem for everyone. Many people complain about heavy hair fall as the
majority of them suffer from Alopecia disease which is an autoimmune disease. On the other hand,
the appearance of acne scars, wrinkles, pimples, & red marks are the major skin complications.
Many medical Aesthetic clinics in Foxboro, Walpole, Sharon, Norwood, Franklin, Wrentham,
Midway, Bellingham, Mansfield, Blackstone, Dedham and Westwood regions ... Show more content
Many people visit their dermatologists to with severe skin problems like wrinkles, dark spots, red
patches, spider veins, pimples, blisters, scars, sun burns, & various other skin conditions.
Microneedling for rosacea is an optimal treatment to get rid of any type of skin problem & it deliver
youthful appearance to blemished skin.
Why take Microneedling for rosacea treatment
No downtime: After undergoing Microneedling treatment, a patient can get back to work as
anesthesia is not required in this procedure.
Ideal for all skin types: Microneedling for rosacea treatment is suitable for males as well as females.
With different skin types, patient's skin condition may vary but Microneedling therapy is favorable
for all.
Clinically proven & safe: There are zero chances of errors or any complication as Microneedling is
approved by FDA and it offer high degree of safety to the patients.
No side effects & fast results: One the feel quick transformation of skin after undergoing
Microneedling treatment with bright, even–toned, & scar–free skin within 2–3

Productivity Improvement in Screw Type Biomass Briquettes...
The sectional details of the parts are shown in fig 3 in which the machine shaft is supported by
radial and thrust bearings. Radial bearings support the dead load on the shaft, while thrust bearings
support the axial load due to compression of saw dust by screw. One end of the shaft is connected to
the gear drive. In the other end of the shaft screw is inserted. Starting section of screw placed inside
barrel conveys the material into the mould. Mould is made in two sections, first in which the cross
section gradually reduced to the final shape of briquette (called forming mould or wear sleeve) and
the later with uniform cross section of the final briquette which exerts necessary back pressure for
compression due to friction. ... Show more content on Helpwriting.net ...
For the second set of readings the stoppages are preplanned so that screw is removed before it was
damaged considerably. The heater is stopped earlier; very fine powder not suitable for briquetting
was introduced inside to push the previously formed matter out making the cleaning process easy
and short. The system will be started again with the new screw in place and heated to required
temperature about 250oC. The average down time in this trial was considerably reduced to 31
minutes. The experimental details are given in table 1. Table 1 Experimental details for Eutectrode
700 coated screw
The same kind of trials are repeated with screws coated with VAUTID 302 which is a tungsten
carbide electrode and its coating increased life of screw to more than 10 hrs[10]. The same type of
mould with Eutechtrode 700 was used in this trial but replaced along with the second screw
replacement. Readings were taken for 4 trials to keep the total duration similar to that of first set.
The next set of trials with planned stoppages was also conducted for 4 trials in the similar way and
the readings tabulated. The details of the experiment are presented in table 2. Preplanning downtime
has shown improvements in the following aspects.
 The downtime per setup went down;
 productivity has shown improvement;
 Even though it was not accounted labor productivity & morale went up significantly.
 The production of unacceptable quality briquettes at the last part of

Breast Augmentation Recovery Research Paper
Heading: Breast Augmentation Recovery: Ways to Spend Your Downtime Productively
Page–Title: Tips to Spend Your Breast Augmentation Recovery Productively | Dr. Lee
Meta–Description: Breast augmentation surgery requires weeks of downtime. Check out some ideas
that will help you spend your recovery period productively.
As they say, "No pain, no gain." Before you can enjoy your new breasts, you need to go through the
final stage of your breast augmentation journey, the recovery stage.
Typically, it takes 24 to 48 hours to recover from surgery and a few more days of less strenuous
activities. This means there's nothing much you can do except laze around the house until you're fit
enough to return to work or your daily routines.
The thought of not being able to do anything probably bores ... Show more content on
Helpwriting.net ...
A blog is a great way to free your mind of thoughts that run inside your head as you go through your
breast augmentation process. This will not only help calm your mind, but you can also offer a
unique perspective to readers who plan to get breast implants.
Create a Meal Plan
If your diet consists of unhealthy fats and carbs, your recovery is a great time to overhaul your diet.
Collect healthy recipes that you can make once you're ready to cook, and add them to your meal
time. When you plan your next meal, there's a good chance that you stick to a healthy diet.
Meditate
Meditation can help improve your breathing and calm your mind. Additionally, it's a peaceful way to
evaluate your life and discover ways to make your life more meaningful.
It usually takes six weeks before you can resume normal physical activities. It's short, but the length
can feel like forever with restricted activities. Dr. Lee understands this, so he'll provide instructions
to help you recover quickly, safely, and productively. For more information about breast
augmentation, consult Dr. Lee

Power Corporation : Team Report Round 2
DTL Power Corporation: Team Report Round 2
Introduction
In round two of the simulation, an attack on DTL Power left services down for hours last
Wednesday. The cyber–attack left residential, business, and government customers in the dark for
hours. During the forensic investigation, evidence revealed that the cause of the attack was a worm
intrusion that caused a reduction in DTL system functions. This reduction in system functions
resulted in an excessive amount of downtime. The confidentiality, integrity, and availability of
DTL?s system was compromised. Cyberterrorism tools such as port scanners were found in our
system. These tools were not detected prior to the investigation.
The U.S. economic downturn also played a major role in our security selections. Due to these recent
attacks and the impact they have had upon our system, we will analyze our disaster readiness level,
national security index, and budget. A detailed review of our security policies, procedures, rationale,
and changes that were in place prior to the attack will be performed. This evaluation of our security
decisions will be then be adjusted and reapplied to the control set in order to improve our security
and national security index. After reviewing current security procedures, recommendations will be
given to maximize the security posture and performance during round three.
Goals and Rationale
During this round of the simulation DTL strategically leverage the cost and benefits of various

The Benefits Of Cloud Computing
Cloud Computing has grown tremendously in recent years because of its convenience, flexibility,
mobility, and availability. It enables users to access resources online throughout the internet from
anywhere at any time. Data and applications are available to end users no matter where they are in
the world, dispersed groups of people can now meet virtually and share information in real time, and
the reduction of servers and software costs can significantly reduce without impacting the
capabilities of a company's IT infrastructure. However, despite the many benefits of cloud
computing, there is one major drawback of all these advantages that cloud computing offers, and
that is security. Due to the high demands on large scale ... Show more content on Helpwriting.net ...
Many things can affect the reliability of the cloud such as failed servers and an overload of data.
This report will focus on the privacy and reliability related issues concerning cloud computing
security, and how these risks can be approached. II. Technical Summary The report that I selected
focused on the development of cloud computing in security issues related with the privacy and
reliability, the key factors of affecting the security risks, and also the suggestions and
recommendations for these risks. The expectations for reliability of the cloud continues to grow as
more and more applications are developed based on cloud service. To meet those expectations,
cloud service providers need to understand the challenges and find ways to increase the reliability of
cloud services, and also ways to avoid the risks. Some of the risks that affect the reliability of the
cloud is co–residency and multi–tenancy, downtime, and latency challenges. Co–residency is when
multiple services are held in a server. This makes it difficult to predict the performance of an
application. Reliability can be affected by other services that are busy. Multi–tenancy is when
multiple independent instances of an application can be consolidated on a single virtualized
platform. The instances can then be available simultaneously to various groups of users. Multi–
tenancy has the same cost benefits and challenges as

Acme : Design And Implementation Of The New Network...
One of the largest goals of the Acme Relocation Project is the design and implementation of the new
network infrastructure. Acme Produce 's Management team has requested the Enterprise Network
Engineer design and implement a novel network infrastructure. The current onsite Information
Technology team of Acme Produce is lacking Senior Network Engineers. Acme Produce 's
Management team has decided to outsource this portion of the project to avoid missing project
deadlines, as the Senior Network Engineer positions available have been vacant for several weeks.
To complete the lofty goal of designing a new network infrastructure the Enterprise Network
Engineer must meet several objectives including design of the physical placement of network
devices, design of the physical connections between all network devices and design of the
segmentation of the network utilizing VLANS. The Enterprise Network Engineer shall utilize
several of the previously completed objectives including the network inventory scans and network
device configuration audit to assist with the design. The Enterprise Network Engineer will utilize
software such as Microsoft Visio to layout design schematics for all proposed hardware per physical
location including any previously discussed and approved hardware repurpose recommendations.
The Enterprise Network Engineer will include repurposed hardware within the Visio schematics;
however, the repurposed hardware may or may not be implemented on the new network

Ultrasound Sun Exposure
With passage of time and sun exposure, once beautiful flawless and lustful female cleavage slowly
shows its age, loses its glow, smoothness and lustful appearance. It is slowly replaced by crinkly
skin which is coarse, rough and unpleasant to touch. Visible appearance of lines, wrinkles,
discolorations, spots and mark, solar elastosis, actinic keratosis even skin cancer replace what was
once a showpiece, the center of attention.
The loss of skin's healthy collagen and elastin volume and ensuing thinning and appearance of
coarse and fine wrinkles of the skin of the décolletage
The cause excessive sun exposure, age, smoking, frequent weight loss and weight gain, pregnancy,
hormonal decline and genetics.
The solution is simple ... Show more content on Helpwriting.net ...
During this procedure small amount of blood is extracted from the patient and expect a specific
component called PRP is separated by a centrifuge then aspirated and injected into the patient's
cleavage area to promote tissue and collagen growth factors.
ULTHERAPY This treatment is a sophisticated, FDA approved focused Unique Ultrasound energy
intended skin's underlying deep structures. It lifts, tightens, firms. There is no downtime, and it is
non–invasive even though there is some discomfort during the treatment.
IPL or BBL Sun damage reduction by IPL or BBL these devices are Intense Broad band pulse lights
and they are the first line of defense because their benefits are multiple. The IPL is affordable, with
no downtime. No anesthesia is necessary. It helps eliminate discolorations and unwanted dilated
blood vessels providing immediate smoothing of the skin. Multiple sessions may be necessary. At
our institute we utilized the best in safety and precision IPL device known as "Lume one" and or
Sciton BBL
LASER at our institute in Chicago we utilize two major LASERs for cleavage rejuvenation and to
eliminate sun

CASH Database Analysis
Designing a Database System for CASH
Samar Timilsina
Shabab Chowdhury
Data Security and Disaster Recovery CS 348
Dr. Gary Lieberman
April 15, 2016
Designing a Database System for CASH
The financial advisory and asset management firm Cushman, Ash, Singer and Homberg (CASH)
offers investment management, global investment solution, and advisory services to its clients.
CASH services are located around the country in 43 cities and 27 nations. Additionally, CASH
attracts corporations, public funds, sovereign entities, endowments, foundations, labor union funds,
financial intermediaries, and private clients who need help in either investing, starting, or managing
their own businesses. Headquartered in New York City, CASH ... Show more content on
Helpwriting.net ...
The availability of a system can be expressed through this calculation:
(Actual uptime)/(Expected uptime) ×100%
The result of this calculation is expressed in terms of the number of 9s (see Table A1). This
calculation shows the availability percentage, which is often expressed in number 9's, and what it
means for an organization in terms of possible uptime or downtime. Because of the nature of the
business that CASH supports, it is imperative for them to have system availability of close to
99.999% (Tuttle, 2012).
"In a volatile and technology dependent business climate, downtime, whether it is planned or
unplanned would cost a fortune to the company" (Quintero, Finnes, Herrera, Shankar, & Sigel,
2010, p. 1). Due to the firm's global presence and business operations being held 24–hours and six
days per week, the downtime during peak hours could mean the loss of revenue for the firm in terms
of millions of dollars per minute. In order to prevent any type of data or connection loss for their
clients, a set of High Availability and Disaster Recovery (HADR) must be in place for a firm like
CASH (Quintero et al., 2010).
Disaster Recovery
"Disaster Recovery is the process an organization uses to recover access to their software, data,
and/or hardware that are needed to resume the performance of normal, critical business functions
after the event of either a natural disaster or a disaster caused by humans" (Disaster Recovery) The
goal for any disaster recovery plan would be

Analysis of Guangzhou Container Terminal Capacity
Term Project Throughput Capacity Report of Indented Berth Design at Guangzhou Container
Terminal No.1 Objective: In this term project, a seaport terminal is selected to calculate the current
throughput capacity based on the data measured in google earth and found on the official website.
Then we should propose a modified berth layout by changing the existing berth to include an
indented berth, and estimate the increasing rate of the annual throughput capacity. I selected
Guangzhou Terminal No.1 (Nansha Port Area PhaseⅡ) as my study port. Content: Current
Guangzhou Container Terminal No.1 1 1. Introduction 1 1.1 Description 1 1.2 Port infrastructure 1
1.3 Port facilities 2 1.4 Container yard storage layout plan 2 ... Show more content on
Helpwriting.net ...
The first and last trolley travel routes are showed as below: ① ⑤ 3. Port throughput capacity
evaluation 3.1 Facilities data Terminal& Yard Data * Terminal throughput=4,200,000 container
moves/yr * Yard area=1,500,000 square meter * Container berths=6 * Total berth length=2,100 m *
Water depth alongside=15.5 m * Quay length=220 m * Apron depth=60 m * Distance between two
stacks every block=6 m * Yard capacity=16*12*5*8*3=2,3040 number 40'–containers * Container
dimensions (L*W*H) =12.2m*2.44m*2.9m * Container stacking height=3 high Quay Crane Data *
Max. Quay crane capacity～60 container moves/hr. Adopt 50 box moves/hr for facility requirements
analysis. * Actual productivity (or gross crane rate) is about 20～30 box moves per vessel hour, or
up to～500containers per day. * No. of quay cranes needed=3 each berth. Automatic Guided Vehicle
(AGV) Data * Average travel speed=4.5 m/s * Loading weight=40t (40'–container); 60t (2×20'–
containers) * Mean time between failures (MTBF) =1480 container moves * Mean time to repair
(MTTR) =12 minutes * No. of AGV=90, each berth has 15 Automatic Stacking Crane (ASC) Data *
Hoisting speed=25m/min (loaded), 50m/min (empty) * Trolley speed= 70m/min * Gantry speed=
130 m/min * Time needed to line up and hook up container= 15s per box * Mean time between
failures (MTBF) =1122

A New Picture Archiving Communications Systems ( Pacs )...
Challenge the Vendor As a member of an organization acquiring a new Picture Archiving
Communications Systems (PACS) software, it is imperative to make certain of several vendor
challenges that sales representatives won't address in depth. With PACS applications there are
continuous challenges because of the complexity and constant evolving technology in the Imaging
sector of health care. Particularly, there are three encounters which I will address that a PACS
vendor may not identify the imperfections of their application. Primarily integration capabilities are
huge to countless in Imaging, as most PACS software's struggle to be well matched with the
Radiology Information System or the Health Information System. It is essential for the PACS
application being purchased have a platform that is compatible with the software's already within the
organization in order for the workflow to be efficient. Another topic vendors tend to breeze over are
downtimes and how often they may occur. Although downtimes shouldn't occur frequently the
departments need to be established and up to date on downtime scenarios, which the vendor should
provide support for 24/7. In addition the vendor should have solutions in order to make sure the
departments are fully functional even during a downtime scenario. Lastly, interoperability concerns
are a major factor as healthcare enhances and is improving. Imaging plays the center role to a
patient's continuous care and better outcomes. Configurations

Microlite Case Study
Case Study Microlite S.A.: The Pan–Orient Decision Abstract Microlite S.A. which is located in
Brazil was the largest producer of batteries in South America with a mighty 55% share of the
Brazilian battery market. Top Management had decided to shut down all but one out of three of the
dry cell battery factories in Guarulhos. This opened up the chance for Luiz Pinto, manager of
Microlite's battery factory in Jaboatão, to take over this market share and do further investments in
his company. This report is going to describe three basic different proceedings on how he can
increase his production. Take over the old machines from the factories in Guarulhos, invest in new
machines from Pan–Orient or come up with new ideas how the current ... Show more content on
Helpwriting.net ...
The second phase is dedicated to a step–by–step improvement. This improvement needs to be done
anyway and during this phase we gain time to educate the people better, so that they could run the
Pan–Orient machine and that they have a chance to find new jobs if the new machine arrives. The
main idea of this phase is to convert the production line from a pure batch oriented to a more JIT
process. This would help us to reduce downtime and increase quality, with the longer–term objective
that the quality of the batteries increases so much, that we would even be able to eliminate the final
electrical output test. However, this goal is very challenging and we might fail. Therefore we created
the third phase. The third phase, which would come into play approximately one year after starting
phase II, would be dedicated to acquire the Pan–Orient machine, or whatever machine would satisfy
our need at that time. With this machine and the improvements we did so far, we would be
definitively able to eliminate the battery–testing loop, resulting in a payback of about 2.9 years of
this machine. Furthermore, we could fight the increasing competition more efficiently, which we
expect in 1995 when the import taxes drop. We think that we found a good mixture of different
approaches to overcome the under–capacity of Joboatão and are well prepared for the future
competitions and demands. Furthermore this approach enables us to

Tech Co Rc Strengths And Weaknesses
What is Tech Co LLC?
At Tech Co we are committed to identifying the business needs and finding solutions for resolving
the business problems. Over the last several years, our organization has been committed to
providing valuable resources to help businesses with performing strategic problems, conducting a
gap analysis, and identifying the strengths and weaknesses of the business. In doing this we are
helping businesses have a depth understanding of the importance of business analysis. At tech co we
are responsible for implementing the following;
Identifying the business needs with support of the business strategy.
Defining the tactics that will enable the business to achieve its strategy.
Strategy implementation
Redefine the tactics after implementation to ensure business change is effective and align with
business objectives to measure performance.
A great benefit for business analysis would be identifying the s.w.o.t analysis for the business. The
s.w.o.t analysis helps the business identify the strengths, weaknesses, opportunities, and threats of
the company. The strengths ... Show more content on Helpwriting.net ...
Despite the advances of data analysis, many organization still face database and software downtime
issues causing the business to shut down for days. Data downtime can hurt a business significantly
from lost of revenue and damage to productivity. "Data loss and downtime are a company's worst
nightmare. Surprisingly, those 65% of IT decision makers who reported using multiple vendors are
actually increasing their chances of having that nightmare. According to EMC, those organizations
using one data protection vendor are the least likely to experience disruption." (Barker, 2014) If you
want to be proactive in avoiding data loss, data protection vendors are the best. Data protector
vendors help with ensuring the operating system is supported and preventing the system from
experiencing

Double Deep Pallet Methods
1. Methods outside the Scope of the Standards:
While conducting Perishable and Frozen LTO studies, it was noted that methodology for handling
commingled double deep pallets was not being followed correctly by LTO Drivers and caused
performances to be unreflective of system elemental time during these observed occurrences.
The proper procedure for handling commingled pallets from any double deep reserve locations is:
LTO driver arrives at the system directed reserve location, vertical lift and retrieve entire pallet stack
(unless the system directed pallet is obtainable).
LTO driver must RPK the non–requested pallet(s) back to an available reserve location.
Once the unused pallets are returned to the reserve location, the LTO driver ... Show more content
The employees of Kroger must have access to downtime sheets and should be notified if not all the
recorded delay time is granted. It is necessary that the workers receive the appropriate indirect time
in order to maintain the integrity of the standards. A complete set of written instructions for
downtime should be developed, jointly approved and conspicuously posted so they are always
available to workers covered by the standard. All employees under production standards shall also
receive a copy of this policy and any updates.
Teamsters Local Union 572 shall also be furnished with a copy of any update. The downtime sheets
should include an area for the employee to record the assignment on which the delay occurred. If
possible, the supervisors should apply downtime as well as breaks and lunch times on the
appropriate assignment during the production shift, rather than waiting until the end of the shift or
the following day. This will ensure that the performance as reported is accurate and timely.
Note: RF Connectivity, Equipment Fueling, and, Empty Pallet Locations, will be implemented and
re–engineered reflective of the prescribed

Incident Management: Unplanned Interruption Of IT Services
1. What is an Incident?
An incident is an unplanned interruption of IT services or a reduction in the quality of an IT service.
Incidents interrupt ordinary day to day technical service, such as when a computer has a virus or it is
not properly working like it was meant to be. These are unintended incidents that require assistance
from the service desk or help desk to repair the normal function.
2. What is the goal of Incident Management?
There is one main goal of incident management, to repair normal function and operation as fast as
possible. Some other goals are detecting events that could interrupt service and resolving the
incidents and lowering downtime for the company. Incident management also needs to maintain
quality of the service ... Show more content on Helpwriting.net ...
If there are no rules in which to handle the incident, the incident might not get taken care of right
away if it's a priority or not at all. On the other hand, there might be more than one person handling
an incident, therefore wasting the companies time and energy while that second person could have
been assisting another incident. Not having guide lines and rules will lower customer satisfactions,
end up costing the company money and rising downtime for clients.
4. Why is it just as important to assign roles and responsibilities to certain employees to own the
Incident Management process or even to manage the life of an Incident?
It's important to assign roles and responsibilities to certain employees to own the incident
management process. Assigning duties and responsibilities is imperative if the company doesn't
want confusions of what they are responsible for which will result in delaying the resolution of an
incident. Employees should have clearly defined roles and tasks so they can effectively
communicate and reduce downtime. If not, employees will have inadequate, inaccurate or
incomplete information about the incident and their role.
5. Describe how your future IT job would function without a Service Desk and/or without Incident

Icu Case Studies
The purpose of this assignment is to identify and evaluate the effectiveness of nursing care to a
patient in the Paediatric Intensive Care Unit (PICU). The assignment presents a case study on a
patient who suffered an out–of–hospital cardiac arrest, and includes the reason for admission,
diagnosis, interventions, management and progress. Due to the many nursing interventions involved
in the case study and the word constraints of the assignment, four primary interventions will be
focused on, being neuroprotective cares, suctioning, pain and sedation, and family centred care.
Furthermore, supporting evidence will be provided and discussed on the impact the care had on both
patient and their family, as well as external resources. Lastly,

Macropod Technology
Increase Efficiency of Organization with Quality IT Hardware Solution Summary: This article aims
to provide information to the readers about the IT hardware solution services to the customers in
order to reduce the total cost of IT ownership. What are the benefits of Data Center Maintenance? It
is very important to maintain the data center regularly to prevent downtime or other interruptions
that can affect the performance of the organization. Therefore, the companies should work with the
maintenance provider to develop a scope of work and then regulate that scope throughout the
company. With the excessive cost of downtime, a strong preventive maintenance program is not
only an option, but is a necessity. Thus, to restrict downtime and to achieve ... Show more content
Macropod Technology (m) SDN BHD, has been a recognized IT hardware company that provides
systems and storage, networking and security, virtualization, unified communication and managed
services. The company provides the best possible service to the clients' at the most competitive price
rates in order to ensure that their business remains competitive, productive and innovative. The
company offers services for the call centers and the business processing outsourcing, key phone
suppliers and IP PBX System. In addition, the company offers products such as AVAYA IP Office
which allows the employees to deal with various business communications by using PC, smart
phone, office phone, home phone, or iPad. Aditionally, Macropod Technology (m) SDN BHD has
been associated with some of renowned clients in Malayasia. How to get in touch with Macropod
Technology (m) SDN BHD? Macropod Technology (m) SDN BHD is fast growing company and
has been an expert in the field of information and communications technology. Thus, at
www.macropod.com.my one can experience the best quality products and services which can help
the business to flourish

Nt1330 Unit 2 Term Paper
1. Downtime:
All members should record downtime for delays that are not included in the standard such as
equipment battery changes, supervisor meeting, equipment problems, excessive congestion delay,
and any other time spent performing non–standard work. All workers should have access to
downtime sheets and should be notified if all the recorded delay time is not granted. It is necessary
that the workers receive the appropriate indirect time in order to maintain the integrity of the
standards. It is important that both management and workers know how much time is allocated by
the standards for a delay in order to identify when conditions may no longer represent that as
engineered.
Workers should closely monitor unavoidable delays and notify ... Show more content on
Helpwriting.net ...
The true cause of one's substandard performance must be identified and researched as to the effect
of any system errors which may have occurred during the production week, and to ensure all
downtime has been allocated for the employee throughout the time in question. Employees may be
at no fault when put into a working environment for which they have no control, especially if placed
into a situation where the workload is not reflective of the conditions the standard was meant to
represent. Members and Local 683 should request all documentation and validate the information
about any discipline

Go Live Conversion Event Plan
Objectives of Go Live/Conversion Event Plan
The go–live plan is intended to aid providers and health IT implementers in planning for EHR
implementation. It will be used to plan the EHR system go–live event and to identify any issues that
need to be addressed in advance. This plan will help eliminate some of the issues that often take
place when a new system is being implemented. In this go–live plan, Healthy Care Hospital is
implementing an EHR in its acute venue. Some of the modules that will be going live on May 1st,
2017 include:
CPOE/Orders Management/Medication reconciliation
Physician Documentation
Nursing Documentation
Ancillary Departments
The following are some of the objectives of go–live/conversion plan:
 Understand ... Show more content on Helpwriting.net ...
Command center will include:
 Multi line phones should be available. Enough for each of the command center staff and at least 3
lines minimum, 5 preferred.
 Command center should house the vendor staff such as super users and customer analyst.
 We need to make sure there enough supplies for all the staff.
 A phone number directory should be available at all desks and be easily accessible to all staff.
 Internet should be available at all times, this is very necessary as access to internet is key.
 Issues need to be tracked somehow and a ticketing system could be used here.
 Schedules need to be created so that there is support from the command center 24/7.
Staffing Resources for End User Support (Sample Support Schedule)
Once we go live with the new system, we have to make sure that End User support is in place. This
includes command center staffing as we just went over. Besides the command center, there just has
to be general end user support, a project management team in place to help, as well as account
management

Case Study Of Centrifugal Pump
Economic Aspect Study
4.1 Profitability of Centrifugal Pump after Implementation of Optimum Maintenance Task
Table 4.1 Total Labor Required For Maintenance [Reputed Manufacturing Company] Frequency
Time
(Hours) No. of Workers Man – hour per stage
Six Monthly 2 18 4 144
Monthly 9 6 3 162
Weakly 45 8.2 1 369
Table 4.2 Labor Saving Cost [BHEL Bhopal Source]
Item Labor Type Number of Labors Per Day
(Current Maintenance) Number of Labors Per Day
(After implementation)
Engineers
(45,000 `/Month) Mechanical 4 3 Electrical 3 2 Control 4 2
Technicians
(25,000 `/ Month) Mechanical 6 4 Electrical 6 4
Total Cost (`/ Year) 7,95,000/– 5,15,000/–
Saving Cost (%) = 35.22
Table 4.3 Downtime Cost [BHEL Bhopal Source]
Average downtime cost rate = ` ... Show more content on Helpwriting.net ...
Equipment:
Centrifugal pump of brine handling
Industry/ section: VPI section (BHEL BHOPAL)
Year of implementation: 11 April 2015
Cost Benefits Analysis:
The power consumption from 19 kw dropped to 12.63 kw (approx.). The cost of VSD for 20HP
drive was around ` 94,752/– and the payback period was 5 months. Implementation Highlights:
To my knowledge, after its implementation the management of BHEL decided to implement it in
other terminal or units.
Summary:

By installation of VSD in centrifugal pump, the power consumption from 19 kw dropped to 12.63
kw (approx.).
Background:
In BHEL VPI at Bhopal and at other brine handling from the storage tank is pumped to the tankers.
These tankers goes on varying in number and the output of the pump is controlled by opening the
recirculation valve which feeds back some of the oil back to the storage tank and in this process,
power consumption remains same irrespective of the number of tankers i.e. lot of power wastes.
This process is known as recirculation method. The capacity of the motor connected with pump was
26 kw.

Landing Zone Essay
Landing Zone Our next customer is a global leader in consumer transaction technologies, turning
everyday interactions with businesses into exceptional experiences. With the software, hardware,
and portfolio of services, this company makes nearly 550 million transactions possible daily. This
company's motto is to help their customers respond to the demand for fast, easy and convenient
transactions with intuitive self–service and assisted–service options. But what they do goes beyond
niche technologies or markets. Their solutions help businesses around the world increase revenue,
build loyalty, reach new customers, and lower their costs of operations. By continually learning
about–and pioneering–how the world interacts and transacts, this global leader is helping companies
not only reach their goals, but also change the way all of us shop, eat, travel, bank, and connect.
They include thousands of banks and retailers that depend upon tens of thousands of self–service
kiosks, point–of–sale (POS) terminals, ATMs (automated teller machines), and barcode scanners,
among other equipment. Traditional Approach In the traditional architecture, this customer could
only collect a snapshot of data, which limited the accuracy of its predictive models. For example,
the company might collect snapshots from a sampling of ATMs (perhaps once–daily performance
data) where the real need is to collect the entire set. In addition, this company needed to avoid
downtime for its clients at all costs.

Customer Service Representative For Manufacturing 2014 Essay
I am seeking the position of Production Supervisor for
Stark Corporation in San Antonio, TX – listed on Indeed.com
Objective Statement
With 20 years' experience and dedication within Production, Product Assembly, Customer Service,
and Engineering as a Manufacturing – Quality Engineer and Supervisor I am capable and
determined to use my Talents, Accountability, Teamwork, Management Skills and Engineering
Abilities to deliver business results and to continuously improve the Manufacturing & Quality
Processes and Customer Satisfaction.
Skills Workflow Analysis ISO 9001, 13485 & FDA Regulations Operations Management &
Customer Relations GMP, Quality Assurance & Audits Six Sigma, TQM & Lean Manufacturing
Supply Chain Strategies – Management Performance Optimization Analytical & Creative Problem
Solving
Work Experience
Xytronics – San Antonio, TX
Customer Service Representative for Manufacturing 2014 – 2015
Provided quotes for electronic assemblies using pricing structures that allowed for greater profit.
Encouraged cross –functional team leadership with manufacturing, engineering and customers to
overcome difficulties with supply, production and quality of electronic assemblies eliminating
downtime consequently increasing "on time" shipments by 10%.
YOH LLC Contractor for Boeing – San Antonio, TX
Operations Analyst for Manufacturing 2011 – 2013
Evaluated production needs and performance standards by providing

Mobile Computing and Social Networks
Mobile Computing and Social Networks CIS 500 09/03/2012 "Geolocation in general is the practice
of determining the physical, real world location of a person, device or subject matter using digital
information processed through the Internet or other electronic means of communication" (How
Accurate is GeoLocation?). You will be using this type of technology to acquire data from one
person's computer/mobile device, to try and identify where their actual location is. This type of
technology has become very popular over the years with the ongoing social networking craze. It's
also a great way to know where your friends are and a way you can check into your favorite places.
Geolocation has truly made an impact on the ... Show more content on Helpwriting.net ...
Aside from personal banking, individuals may also check their social networking accounts, check
their emails, search the web, play games, view photographs, call, and listen to music. There is so
much to do through mobile applications now, that you really don't have to spend a lot of money on a
personal computer. The Cloud system is a great benefit for customers. It's a very convenient system
to have. You can be in another part of the country or world, and you'll still be able to check in, view,
and be in everyday talks with your business. Another main benefit is that it can save you money.
You don't have to spend your hard earned cash on expensive hardware, software, servers, etc.
"Companies evolve constantly as well as their needs, and you may not know what will be yours in
few months. Cloud computing companies operate on a pay–as–you–use model, so you only pay for
the services you require and use and can easily adjust your exigencies in power, space and services
at any time" (Thakral). There are also on–demand resources and customers will have access to a
large amount of applications. They don't have to download or install these applications either. Small
screens form a challenge when it comes to developing applications that run on mobile devices.
Mobile devices have changed throughout the years. They aren't the same giant box that they used to
be. Mobile devices have adapted a more sleek and slim look with a more powerful

Research Methodology : Cloud Computing Downtime
Cloud Computing Downtime
Part One: My Proposed Research Methodology Generally, two sources of data are in existence:
primary and secondary. In my research project, I intent to utilize both sources. The rationale for my
choice of both sources is that in research work, there is a need that one use almost all available
secondary data sources before undertaking to complete a primary study (Sappleton, 2013). In
addition, secondary data is readily available and will give insight into the development of a
hypothesis for my study. Therefore, I will check all the available data sources from peer reviewed
journals both at the university library and online through google scholar and other search engines.
Accessing sources from the library will need permission from the librarians while completion of the
primary study will need an informed consent of the participants. I will use a survey in which I will
design both open–ended and closed questionnaires that I will administer on my target population to
collect data (Sappleton, 2013). The criterion for the choice of my target population will be people
who work within technical departments of companies that use IT. I will use a relatively small sample
of respondents because the topic of my study is quite sensitive as it concerns security. It is therefore,
important that only a few people exchange information about the topic. At the completion, of my
primary study, I will use a stratified sampling

Server Downtime Case 2.1
Case 2.1 Server Downtime
As part of the first assignment, research and analysis of the downtime on a client's primary network
servers during the month of April must be done in order to further prepare a presentation to the
company's management.
Downtime refers to a period of time that a system fails to provide or perform its primary function.
The term is commonly applied to networks and servers. Server downtime, a period of time when the
server is unusable, is prevented by close monitoring and management of key server metrics. Server
downtime can result from several problems such as overloaded processors, rapidly expanding
memory usage, disk errors and many more. Through the study of this client's server downtime,
management and ... Show more content on Helpwriting.net ...
The problem that arises most is memory errors, which happens 10 times out of the total 22. The
second utmost problem that arises is lockups, which occurred 6 times. Since the month of April has
4 weeks, Weekly virus scans occurred 4 times. Slow startup and manual restart occurred only once
per cause. The frequency distribution table can be used to construct a simple bar graph that
represents the data. The horizontal axis of the bar chart corresponds to the 5 problem experienced in
the frequency distribution table while the vertical axis corresponds to the frequency.
Following the frequency distribution and bar graph, further analysis must be done by using the last
set of data which is the downtime data. Downtime data is collected in minutes that vary from 10 to
60 minutes. Each occurrence out of the 22 has a certain number of downtime minutes. To make the
representations, explanations, calculations and analysis straightforward, the data is taken from the
April–Server Downtime table then separated into the 5 cause categories and calculate each
categories total downtime before creating representational graphs and charts.
Date Problem Experienced Downtime Minutes
01/04/06 Lockups 25
02/04/06 Lockups 35
05/04/06 Memory Errors 10
07/04/06 Lockups

System Downtime: IT Support In Furchester College
System Downtime
System downtime can happen in many different ways within Furchester College such a maintenance
taking place or hardware errors by this, the users cannot perform routines daily, but this can be
stopped by an IT Support if they follow the correct policies and procedures in the right way. If a
system downtime occurs this can be harmful for the college because if the servers go down, this will
result in students and teachers losing work if they have not backed up already or corruptions could
occur if they were copying it. If the IT support in Furchester college need the systems to go down
for maintenance, they would need permission from senior management before they do any kind of
maintenance. This is so that all the staff and students will be aware that the systems are down for
certain time.
Disruption
A disruption can occur in a workplace where something unexpected can happen anytime which is
why Furchester College must have procedures into place because if it does happen they can take
actions to resolve issues as quick and safely as possible. In Furchester college if disruptions have
occurred within the server then the IT technician must prepare if that happens such as backing up the
data so nothing gets corrupted or lost. Staff and students should use cloud storage to back up ...
Show more content on Helpwriting.net ...
In Furchester college there is a lot of equipment that needs to be maintained such as the servers,
projectors, network or printers because if too much money is spent on just one resource then this
could cause an impact on how much can be spent on another equipment. The budget then goes to
waste from Furchester College. These resources should be spent carefully so that nothing is wasted
or unused, also to keep in mind that they must be well balanced so if it is not needed then it should
not be

The Final Deployment Model Is Like No Other

Recommended

Recommended

More Related Content

Similar to The Final Deployment Model Is Like No Other

Similar to The Final Deployment Model Is Like No Other (13)

More from Lindsey Jones

More from Lindsey Jones (20)

Recently uploaded

Recently uploaded (20)

The Final Deployment Model Is Like No Other