One day maybe you wonder whether or not your home contains asbestos. As we know, asbestos-containing material (ACM) is widely used in 1980s and mostly can be found in roofing wall sheeting, floor sheeting, fencing, eaves, insulation and hot water systems.

1. Home Safety Awareness : DIY Asbestos
Testing Mackay

2. One day maybe you wonder whether or not your home contains asbestos. As we know,
asbestos-containing material (ACM) is widely used in 1980s and mostly can be found in
roofing (roof asbestos removal read here), wall sheeting, floor sheeting, fencing, eaves,
insulation and hot water systems. If you are planning on doing asbestos testing by
yourself, then you need to obtain asbestos testing kits. These days, you are able to
purchase ACM testing kits everywhere. You can also purchase it online.
However, though many testing kits are retailed, but it is still arguable whethere or not
they give an accurate result. But, if you sill want to try home-based testing methods by
yourself, then here are what you need:
1.Spray bottle
2.Plastic sheet
3.Disposable protective gloves
4.Face mask
5.Scissors
6.Plastic bags
7.Permanent marker

3. Cautions: Do not disturb the surface of the suspected product until you receive the test
result.
Bonded asbestos (non-friable materials) is often not dangerous. However, as time
goes by and our home gets older, the chance of non-friable products to be damaged is
high. The damage bonded materials can be dangerous when they release fibres into
the air.
Once the toxic substance gets into our respiratory system, most likely a person will be
at a high risk of developing ACM-induced diseases, such as asbestosis, mesothelioma
and lung cancers. If there is a situation where handling such material is unavoidable,
you must follow some precautions.
Reference:http://asbestoswatchmackay.com.au/asbestos-testing-
mackay/

4. How to conduct the test safely?
Generally, every building must be checked for fibrous products. But it becomes
critical, when you own a property that was built before 1990. Fibrous products were
extensively used as building material from the1920s until the 1980s since their
hazardous effects were not recognized.
To get an accurate result, it is the best to conduct a sampling collection and send the
samples to an accredited laboratory for further analysis.
Follow these following steps to conduct a safe sampling collection:
Step 1: Identifying potential contaminated area.
You can read from many sources about where can usually ACMs found in a house.
You can check the links below for further information.
Common location of fibrous material in domestic and commercial
buildings: www.deir.qld.gov.au
Where and when ACMs were used:
www.health.gov.au

5. Step 2: Quarantine the contaminated area
Ideally, homeowners should stay away from the contaminated area for at least two days
before the testing work. Do not vacuum or clean the suspected area before examining for
fibers. The ventilation or cooling appliances should always be turned-off before collecting
the sample because such appliances have the tendency to suck away the dust particles.
•Wear a face mask and plastic gloves when you start sealing the area.
•Spread a plastic sheet on the floor then fill a spraying bottle with a mixture of water and
soap.
Step 3: Dampen the suspected material
Spray the suspected material repeatedly. Ensure that the mist is dispelled in every part of
the area. The moist ensures that the dust begins to settle on the plastic sheets. Cut a small
section of the plastic sheet with a scissor.
Step 4 : Put the sample in sealable bags.
After you get the sample, put it immediately in the plastic bag and label it with a permanent
marker. Put an ID number, the date, and the time of sampling collection.
Step 5 : Send the sample to a registered laboratory
Send the sample to an EPA-accredited laboratory. Keep the area clear and clean until you
get the report. If the result says positive, you can start to get a cost-estimate for removal
jobs.

6. Should I do DIY fiber testing?
Dealing with ACMs may become dangerous and complicated. Asbestos exposures may
risk your health and your surrounding. That is why the Australian Government highly
recommend you to hire a licensed removalist who have gone through training and have
a certification in doing asbestos related works.
Another aspect that you may take into consideration is, if you choose to buy an all-in-
one kit, you need to check whether the price also covers the laboratory fee. You can
check that beforehand because the kit itself doesn’t come up with an actual examining
method.
Hiring professional contractors might be the safest way to carry out the project as they
will carry the job safely. You will also get a reliable test report back than dealing with a
DIY fiber testing kit.
Tips to Hire Qualified Contractors for Asbestos Testing Mackay
Remember, Diy testing is often complicated and unsafe. This is why you need to hire
an expert to do the job.

7. Here are tips on choosing a right professional to do asbestos testing Mackay works:
Tips #1 – Look for a licensed contractors
The Queensland government has regulations on who can legally perform ACM-
related works. Only a person with Class-A or Class-B license can do an ACM work.
They are reliable since we selectively choose them for their great skills and their
professional conduct. Our endorsed contractors strive to deliver a complete and safe
process of asbestos examination at your premise.
Tips #2 – Choose contractors who have vast experiences
Extensive experience in dealing with fibrous products will make workers know how to
do the job effectively and efficiently. After the work is done, our approved assessors
will do a thorough inspection to ensure that the work area is cleaned and
decontaminated.

8. Our endorsed contractors know what to do and can carry the job in accordance with
national, local regulations, and also safety procedures.
Our approved members are highly skilled and experienced. They know how to address
each clients’ unique needs. Since time is valuable for everyone, our approved members will
give you a clear action plan that will be only executed within your approval. Rest assured
your project will be keep on track.
Tip #3 – Insured services
Many risks are faced during the removal or testing work. Though our members follow the
protocols and take extreme precautions, accidents may still happen. Since our endorsed
removalists are fully insured, clients would not need to worry about paying additional costs
in a case of accident.
Tips #4 – Choose contractors with new, modern and standardize equipment
Look for contractors who are equipped with personal protective equipment and other safety
equipment. The asbestos examining job should be carried out in compliance with national
legislations. Moreover, the removed asbestos material must be disposed of properly.
Make sure to find contractors who provide complete and extensive services. Our approved
contractors provide vast services to handle fibrous materials from an initial testing to the
disposal of hazardous waste.