1. GV-DSP LPR V3 April 17, 2018
-1-
Introduction
The GV‐DSP LPR is a Linux‐based license plate recognition system built in a small box. Integrating with a Web server, the GV‐DSP LPR
can host its own Web site and compare captured license plates either with a standalone database created on GV‐DSP LPR, or a
database downloaded from the access control software GV‐ASManager. When there is a match, GV‐DSP LPR will open a gate or
barrier.
O - - _.
C GEOUISIOH: www.geovision.com.tw
GV—DSP LPR V3
Introduction
The GV—DSP LPR is a Linux—based license plate recognition system built in a small box. Integrating with a Web server, the GV—DSP LPR
can host its own Web site and compare captured license plates either with a standalone database created on GV—DSP LPR, or a
database downloaded from the access control software GV-ASManager. When there is a match, GV—DSP LPR will open a gate or
barrier.
Analog Camera
r
In
'-
‘ir-
Flnie Recognition £
was‘, E
_*
_ E GV—DSP LPR
Setting 3. Database
GV-A5Munuger
GV—DSP LPR V3 April I 7, 2018
2. GV-DSP LPR V3 April 17, 2018
-2-
The GV‐DSP LPR can also deliver live view images and recognized plate numbers, date and time to the GV‐System for security surveillance.
Note:
1. This application is only supported by GV‐System V8.5.5 or later.
2. The maximum resolution is 720 x 480 (NTSC) / 720 x 576 (PAL) and the frame rate is 5 (NTSC) / 5 (PAL).
Key Features
Non‐PC based solution for 1 port traffic or mobile license plate recognition
Wide operating temperature range
Web‐based configuration for image, security settings and firmware upgrade
Recognition triggered by video motion detection or sensor inputs
Opening a gate barrier when a captured license plate matches the database
Manageable by GV‐ASManager access control system
Standalone database
Digital watermark
Hardware watchdog
IP address filtering
WiFi
UMTS
GPS tracking
Recognition results, images and live videos compatible with other system through OCX SDK
Specifications
System Requirement
32‐bit Windows 7 / 8 / 8.1 / 10 / Server 2008
OS
64‐bit Windows 7 / 8 / 8.1 / 10 / Server 2008 R2 / Sever 2012 R2
Browser Internet Explorer 7.x to 11.x
GV‐ASManager
GV‐ASManager V4.2.1 – V4.2.2 (for GV‐DSP LPR V2.03)
GV‐ASManager V4.2.3 (for GV‐DSP LPR V2.04)
GV‐ASManager V4.3 – V4.3.5 (for GV‐DSP LPR V2.1)
GV‐ASManager V4.4 – V4.4.1 (for GV‐DSP LPR V2.2)
GV‐ASManager V4.4.2 – V4.4.3 (for GV‐DSP LPR V2.30)
GV‐ASManager V5.0.2.0 or later (for GV‐DSP LPR V2.33)
O - - _.
C GEOUISIOII: www.geovision.com.tw
The GV-DSP LPR can also deliver live view images and recognized plate numbers, date and time to the GV—System for security surveillance.
P -)
T» __ .
me View
Recognized License
Plate Numbers
GV-DSP LPR
fill GIJIJBIIIJIIUIIIIIWIHIDIZIDJID _
Note:
1. This application is only supported by GV—System V8.5.5 or later.
2. The maximum resolution is 720 x 480 (NTSC) / 720 x 576 (PAL) and the frame rate is 5 (NTSC) / 5 (PAL).
Key Features
0 Non—PC based solution for 1 port traffic or mobile license plate recognition
0 Wide operating temperature range
0 Web—based configuration for image, security settings and firmware upgrade
0 Recognition triggered by video motion detection or sensor inputs
0 Opening a gate barrier when a captured license plate matches the database
0 Manageable by GV—ASManager access control system
0 Standalone database
0 Digital watermark
0 Hardware watchdog
0 IP address filtering
a WiFi
o UMTS
0 GPS tracking
0 Recognition results, images and live videos compatible with other system through OCX SDK
Specifications
System Requirement
OS
32-bit Windows 7 / 8 / 8.1 / 10/ Server 2008
64-bit Windows 7 / 8 / 8.1 / 10/ Server 2008 R2 / Sever 2012 R2
Browser Internet Explorer 7.x to 11.x
GV—ASManager V4.2.1 — V4.2.2 (for GV-DSP LPR V2.03)
GV—ASManager V4.2.3 (for GV-DSP LPR V2.04)
GV—ASManager V4.3 — V4.3.5 (for GV-DSP LPR V2.1)
GV—ASManager V4.4 — V4.4.1 (for GV-DSP LPR V2.2)
GV—ASManager V4.4.2 — V4.4.3 (for GV-DSP LPR V2.30)
GV—ASManager V5.0.2.0 or later (for GV-DSP LPR V2.33)
GV—ASManager
GV-DSP LPR V3 April I 7, 2018
3. GV-DSP LPR V3 April 17, 2018
-3-
Operation
Video Input/Output 1 Video In, 1 TV Out
Video Compression JPEG
NTSC 360 x 240, 720 x 480
Live
Resolutions PAL 360 x 288, 720 x 576
NTSC 1, 3, 5
D1
PAL 1, 3, 5
NTSC 1, 3, 5, 7, 10
Live Frame
Rate
CIF
PAL 1, 3, 5, 8, 12
Image Setting Brightness, Contrast, Saturation, Hue
Alarm and Event Management
Events triggered by motion detection or sensor inputs
Relay outputs triggered by sensor inputs or matched license plate numbers
Mechanical
Video 1 input (BNC port)
Ethernet RJ‐45, 10/100Base‐T
USB 1 USB 2.0 (only for UMTS)
TV‐Out 1 output (BNC port)
Local Storage Micro‐SD/SDHC memory card slot (for Class 6 card or above)
I/O Port 2 digital inputs, 2 digital outputs (DC 5V, 5 mA)
Connectors
GPS 1 RS‐232
Web Interface
Security IP address filtering
Installation Web‐based configuration
Management Maintenance Firmware upgrade through Web browser
Protocol HTTP, TCP, UDP, DHCP, NTP, DDNS
Language English, German, Hebrew, Simplified Chinese, Traditional Chinese
General
Operation Temperature ‐20 ~ 55°C (‐4 ~ 131°F)
Power Source DC 12V, 1A, 50 ~ 60 Hz
Dimensions (W x D x H) 123 x 106 x 25 (mm) / 4.84 x 4.17 x 0.98 (in)
Weight 0.345 (kg) / 0.76 (lb)
Region
Country Support
Argentina, Australia, Austria, Belgium, Brazil, Bulgaria, Chile, China, Columbia, Cyprus, Czech
Republic, France, Germany, Guernsey, Hong Kong, Hungary, Ireland, Israel, Italy, Mexico,
Netherlands, New Zealand, Norway, Poland, Portugal, Qatar, Russia, Slovakia, South Africa,
Spain, Taiwan, UK, USA
Note:
1. The Wiegand interface is NOT functional.
2. The GV‐DSP‐LPR V3 (firmware V1.05 or later) does not support UAE engine.
3. The relay output can only drive a maximum load of DC 5V, 5 mA. Working in conjunction with the GV‐Relay V2 module, it
can drive a heavier load of up to AC 250V 10A, DC 100V 5A.
4. Specifications are subject to change without notice.
Q Geouisiona www.geovision.com.tw
Operation
Video Input/Output 1 Video In, 1 TV Out
Video Compression JPEG
Live NTSC 360 X 240, 720 X 480
Resolutions PAL 360 X 288, 720 X 576
D1
NTSC 1, 3, 5
Live Frame PAL 1, 3, 5
Rate
C”:
NTSC 1, 3, 5, 7, 10
PAL 1, 3, 5, 8, 12
Image Setting Brightness, Contrast, Saturation, Hue
Alarm and Event Management
Events triggered by motion detection or sensor inputs
Relay outputs triggered by sensor inputs or matched license plate numbers
Mechanical
Video 1 input (BNC port)
Ethernet RJ—45, 10/100Base-T
USB 1 USB 2.0 (only for UMTS)
Connectors TV-Out 1 output (BNC port)
Local Storage Micro—SD/SDHC memory card slot (for Class 6 card or above)
I/O Port 2 digital inputs, 2 digital outputs (DC 5V, 5 mA)
GPS 1 RS-232
Web Interface
Security IP address filtering
Installation Web—based configuration
Management Maintenance Firmware upgrade through Web browser
Protocol HTTP, TCP, UDP, DHCP, NTP, DDNS
Language English, German, Hebrew, Simplified Chinese, Traditional Chinese
General
Operation Temperature -20 ~ 55°C (-4 ~ 131°F)
Power Source DC 12V, 1A, 50 "' 60 Hz
Dimensions (W x D X H) 123 x 106 x 25 (mm) / 4.84 x 4.17 x 0.98 (in)
Weight 0.345 (kg) / 0.76 (lb)
Region
Argentina, Australia, Austria, Belgium, Brazil, Bulgaria, Chile, China, Columbia, Cyprus, Czech
Country Support
Republic, France, Germany, Guernsey, Hong Kong, Hungary,
Ireland,
Israel,
-Italy, Mexico,
Netherlands, New Zealand, Norway, Poland, Portugal, Qatar, Russia, Slovakia, South Africa,
Spain, Taiwan, UK, USA
Note:
1. The Wiegand interface is NOT functional.
2. The GV—DSP-LPR V3 (firmware V1.05 or later) does not support UAE engine.
3. The relay output can only drive a maximum load of DC 5V, 5 mA. Working in conjunction with the GV—Re|ay V2 module, it
can drive a heavier load of up to AC 250V 10A, DC 100V 5A.
4. Specifications are subject to change without notice.
GV-DSP LPR V3 April 17, 2018
4. GV-DSP LPR V3 April 17, 2018
-4-
Packing List
1. Power Adaptor
2. Wall Hook
3. Conical Anchor x 4
4. Screw x 4
5. I/O Cable with RJ‐45 Connector
6. GV‐DSP LPR User’s Manual on Software CD
Accessories
Model No Details
GV‐GPS Receiver
GV‐GPS Receiver is a Global Position System receiver, allowing you to perform vehicle tracking
and location verification functions.
GV‐Relay V2 Working with this module, GV‐DSP LPR can drive the loads of relay outputs over 5 volts.
b I I
_V
C Ge0UISIOn: www.geovision.com.tw
Packing List
1. Power Adaptor
2. Wall Hook
3. Conical Anchor x 4
4. Screw x 4
5. I/O Cable with RJ—45 Connector
6. GV—DSP LPR User's Manual on Software CD
Accessories
Model No Details
GV—GPS Receiver is a Global Position System receiver, allowing you to perform vehicle tracking
and location verification functions.
GV—Relay V2 Working with this module, GV—DSP LPR can drive the loads of relay outputs over 5 volts.
GV—GPS Receiver
GV—DSP LPR V3 April I 7, 2018