As the world’s population keeps growing, it will need 45 % more energy by 2030. Finland provides holistic solutions for the whole value chain - from waste and biomass feedstock to energy conversion.

1. FINNISH
WASTE-TO-ENERGY
AND BIOENERGY
OFFERING

2. 2
• Decades of experience with woody
biomass, forest industry side
streams and agro waste
• Full range of services and
technologies in bioenergy sector for
heating and energy supply
• World-class equipment and systems
that radically increase the efficiency
of supplying the raw material without
risking the sustainability aspects
• Best solutions for both large-scale
and small-scale, decentralized units
SOLUTIONS FOR
THE WHOLE
VALUE CHAIN
FROM
FOREST
TO ENERGY
END-USER
WHAT FINLAND OFFERS TO YOU

3. 3
• Expertise in efficient waste collection,
transportation and storage
• Outstanding technology for refining
waste into valuable products e.g.
alternative fuels
• Solutions for recycling, sorting and
management of all kind of waste
materials substantially reducing the
amount of waste being landfilled
• Turn-key solutions for W2E plants
SUPREME
OFFERING FOR
MUNICIPAL SOLID
WASTE
MANAGEMENT
AND
PROCESSING
WHAT FINLAND OFFERS TO YOU

4. 4
WHAT FINLAND OFFERS TO YOU
• Finland has a long experience in
forest industry and a strong
machinery cluster
• Boilers ranging from small to
large scale, including Fluidized
bed boilers (FBB) and Bubbling
fluidized bed boilers (BFB)
• Leading combustion and
gasification technologies
• Off-grid solutions
#1
FINLAND IS WORLD
IN COMBINED
HEAT AND
POWER (CHP)
TECHNOLOGY

5. 5
WHAT FINLAND OFFERS TO YOU
CIRCULAR
ECONOMY
– LEADING EXPERTISE
IN WASTE MINIMIZING,
RAW MATERIAL REUSE
AND RECYCLING,
ENERGY RECOVERY
AND FINAL DISPOSAL
• Globally, 90% of raw materials used
end up as waste
• In Finland, nearly 90% of municipal
waste was recovered either turning it
into energy or by means of material
recycling (2015)
• Only 10% of municipal waste end up
in landfills and the amount is
decreasing since landfilling organic
waste and textiles became
prohibited as of 2016
• New waste refinery and biorefinery
concepts developed and already in
operation in Finland

6. 6
• In-depth understanding of turning
demanding raw materials like saw dust,
wastewater sludge, nitrogen rich
manure and slaughterhouse waste into
liquid and gaseous biofuels
• “Open access” pilots and
demonstration platforms for biogas and
liquid biofuels
• Fully automated and controlled process
operations with 24h technical support
• Tailored solutions for different climates
and customer needs
WHAT FINLAND OFFERS TO YOU
ADVANCED
BIOFUELS –
ETHANOL,
DIESEL AND
BIOGAS
FROM WASTE

7. FEEDSTOCK
PROCESSING
7
WASTE
AND
BIOMASS
PROCESSING
SMART
FORESTRY
AND
HARVESTING
ENERGY
GENERATION
WASTE TO
ENERGY
PLANTS
BIOENERGY
PLANTS
BIOFUEL
PRODUCTION
BIOGAS
PRODUCTION
LIQUID
BIOFUEL
PRODUCTION
FINNISH OFFERING PACKAGES

8. 8
FEEDSTOCK
PROCESSING
IN A CHANGING WORLD

9. FEEDSTOCK TRENDS
The most typical feedstock are
MUNICIPAL SOLID
WASTE (MSW)
HAZARDOUS WASTE,
INDUSTRIAL WASTE
(Food & beverage),
FOREST-BASED
BIOMASS,
AGRO WASTE and
WASTEWATER SLUDGE
2 BUT ONLY
GLOBALLY THE
ANNUAL VOLUME
OF MUNICIPAL
SOLID WASTE
is estimated to stand at
BILLION TONS,
OF THE WASTE
GOES TO WASTE-TO-
ENERGY PROCESS4%
FORESTS ARE A
PRODUCTIVE AND
SUSTAINABLE SOURCE OF
HIGH QUALITY BIOMASS.
Annual forest use in finland is
Room for additional use due to
SUSTAINABLE SMART
FORESTRY PRACTICES
60MILLION m3

10. 10
FEEDSTOCK
PROCESSING;
FINNISH OFFERING

11. BMH Technology Oy specializes
in turnkey deliveries of SRF
(Solid Recovered Fuel) production
plants and solid fuel handling
systems for power plants and
cement kilns.
The company offers solutions
which transform the solid waste
streams to high-quality fuel and
valuable recyclables.
11
BMH TECHNOLOGY
WORLD-CLASS MATERIAL HANDLING TECHNOLOGY

12. 12
BMH TECHNOLOGY
WORLD-CLASS MATERIAL HANDLING TECHNOLOGY
• Low CO2 emissions
• Thanks to stable
combustion,
no dioxin
is produced
• Reduce usage of traditional
fossil fuels, such as coal,
gas, oil, etc.
• Increase electricity
efficiency
• Recycle metal and other
valuable substance

13. 13
CROSS WRAP OY
LEADING WASTE INDUSTRY SOLUTIONS FROM THE LEADING MANUFACTURER
A bale is an efficient way to handle,
store and transport waste – and if
you so choose, to reuse it i.e. as a
source of energy. Wrapped bales
are environmentally friendly,
effective and economical.
What’s more, the automatic
opening and dewiring can
substantially improve production
efficiency.

14. 14
CROSS WRAP OY
LEADING WASTE INDUSTRY SOLUTIONS FROM THE LEADING MANUFACTURER
Cross Wrap builds and installs
automatic stretch-film bale wrappers
to pack various waste materials and
recyclables for transport and
storage.
The product range also includes bale
openers and de-wiring machines that
open up the bales when materials
need to be utilized.
The original cross wrapping method
is patented globally and other
patents for new innovations have
followed.
CROSS WRAP OY’S unmatched
experience, combined with its leading-edge
patented technologies, means that it can
deliver an Effective, economical and
environmentally friendly wrapping
solution for every waste management
challenge.
The customer needs only a baler,
wrapping line and film – all provided
by Cross Wrap and its partners
20 years – 400 machines – 50 countries

15. 15
DUSTCOMB
ENGINEERING AND CONSULTING RELATED TO PROCESSING AND REFINING OF FUEL WOOD
DUSTCOMB offers engineering and
consulting related to processing
and refining of fuel wood.
Solutions include crushing, drying,
screening, grinding, etc.
DUSTCOMB’s solutions ensure
maximum fuel efficiency, lower fuel
consumption, reduced emissions,
improved power plant operation
reliability and increased storability of
the biofuel.

16. 16
DUSTCOMB
ENGINEERING AND CONSULTING RELATED TO PROCESSING AND REFINING OF FUEL WOOD
• Increase the usability of forest
residues for energy
generation.
• Replace fossil fuels with
refined biomass.
• Improve handling and logistic
chains for fuel wood.

17. 17
ECOMOND
TCOS – TASK CONTROL AND OPTIMIZATION SOFTWARE
ECOMOND is a software company specialized in
electronic task management and optimization
software TCOS – Logistics Control
TCOS is a modern non-industry specific solution for managing operations
in various businesses from waste management to healthcare and from
services to logistics. The solution is made for handling the whole task
management chain with large number of transactions and can be
integrated to almost any other software like financial, ERP, HR etc.
BENEFITS
• 10-30% savings in the operational costs
• Improved customer service and remarkable reduction in manual work
• 80-90% less time in planning needed and hugely improved reaction rate
into changes
• 100% transparent and optimal operations
• Typical pay back time 3-6 months

18. 18
ECOMOND
THE PROJECT
REFERENCES
Waste management companies and cities:
L&T, SITA FINLAND, RENONORDEN, RENOVA
(City of Gothenburg)
SEVERAL MUNICIPAL COMPANIES
Service companies in different branches
ANTICIMEX, LINDSTRÖM, INNOGAS
Logistics in different branches
LATVIAN STATE FOREST, BIOENERGY
PROJECTS, PALPA

19. 19
FARMI FOREST
FARMI FOREST, a global pioneer since 1962 in
developing value adding innovative forestry
and biomass processing solutions and services.
for quality, productivity, safety and customer
FARMI Profi and Smart product lines provide
productive and sustainable full forestry
solutions around farming tractor both for semi
commercial and professional customers.
Our partners in over 40 countries support our
finding the right solutions whether you are
energy wood harvesting or producing biomass
Farmi Forest, part of Normet Group is located in
the heart of woodlands of Iisalmi, Finland.
farmiforest.fi

20. 20
FERROPLAN OY
FERROPLAN OY produces waste treatment solutions for recycling, sorting,
and managing of a wide variety of materials.
• Efficient waste management
solutions with 33 years of
experience
• Conveyor solutions
designed for handling piece
goods and bulk cargo
• Solid waste treatment
• Water and waste water
treatment, all in one
package
• Waste to landfill
reduced to a third
• Efficient, reliable, and safe
• Automate and optimise
the flow of materials or
semi-manufactured
products at the
customer's site, helping to
ensure uninterrupted
production

21. 21
FERROPLAN OY
REFERENCES,
ONGOING PROJECTS
• BIWASE, Vietnam, composting
plant, municipal waste 420 t/d
• VIMELCO, Vietnam, constructing
waste treatment line, municipal
waste line
• NASTOLA, Finland, water
treatment plant renovation
• Andritz, municipal waste
treatment line

22. 22
INDUFOR OY
INDUFOR GROUP is one of the
world's leading forest consulting
service providers. It provides
high-quality knowledge and
services for its clients over the
forest and forest industry value
chains.
Related to W2E and bioenergy
Indufor offers services considering
biomass sourcing, investment
feasibility as well as new solutions
and markets
CONSULTING FOR THE FOREST INDUSTRY VALUE CHAIN

23. 23
INDUFOR OY
INDUFOR OFFERS
• Biomass sourcing
• Feasibility studies
• Help in partner search
(raw materials, technology, etc.)
• Help in finding new solutions and
new markets (investment and
resource needs, technologies,
markets, policy environment)
REFERENCES, ONGOING
PROJECTS
• Biomass sourcing, pre-feasibility
and feasibility studies for CHP-
plants in various African countries
(e.g. South Africa, Zimbabwe and
Ghana)
• Regional biomass supply and price
forecasting for a 50MW biomass
power plant in North Asia
• EBRD study on transforming wood
into biofuels in Russia

24. 24
INMEC INSTRUMENTS
SAMPLE PREPARATION SOLUTIONS FOR LABORATORY ANALYSIS

25. 25
INMEC INSTRUMENTS
SAMPLE PREPARATION SOLUTIONS FOR LABORATORY ANALYSIS
We offer
various
models for
different
uses
Obtaining reliable
measurements from
test samples is rife with
challenges that are not
catered to with
available industry
solutions
Inmec Instruments Ltd
Lukkarinpolku 3a
87200 Kajaani
+358 400 280 202
www.inmec.fi

26. 26
MHG SYSTEMS OY LTD
MODERN IT SOLUTIONS FOR FORESTRY
KEY CONCEPT
• Platform for forestry stakeholders
• woodlandmanager.com
CUSTOMER BENEFITS
• New business opportunities
• Modern tools for work management
• Networking with partners and other
stakeholders
WHAT CAN WE OFFER FOR
THE TARGET COUNTRY/INDUSTRY
SECTOR?
• New innovative way to connect forest
owners and forestry entrepreneurs
• Bring more wood for the industry
• Raise awareness of forest owners about
the possibilities of their forests

27. 27
MHG SYSTEMS OY LTD
MODERN IT SOLUTIONS FOR FORESTRY
REFERENCES, ONGOING PROJECT
• Mobile work management solution used
by the biggest forest management
associations in Finland
• Mobile field data collection tools in use
in multiple developing countries
• Dozens of customers in Finland taking
advantage of our ERP solution

28. 28
MIKSEI LTD
We offer green, forest based energy
solutions for heat and power supply
for every customer need
We offer tailored energy supply services to all
kinds of clients from private homes to
metropolises.
From forest to a warm house: we provide you
with complete set of services and technologies
whatever your energy needs are.
CUSTOMER BENEFITS
• Replace coal as raw material for energy supply!
• Reduction of CO2
• Cost efficient
WORLD CLASS SOLUTION
We offer full range of services and
technologies in bioenergy sector
SECURE SUPPLIER
Our technology is in use in hard
weather conditions (yearly variaton
50-70 C degrees)
MARKET LEADER
Finland is known for its strong
know-how in bioenergy technology
WHY CHOOSE US
CLEANTECH FINLAND BIOENERGY – CFB

29. 29
MOLOK OY
YOUR PARTNER IN WASTE COLLECTION
MOLOK Oy is a company
manufacturing, marketing
and selling Molok® semi-
underground DEEP
COLLECTION® waste
containers.
Leading manufacturer in
the world 140 000 installed
waste containers in more than
40 countries

30. 30
INNOVATIVE MOLOK ® DEEP COLLECTION® SYSTEM
THE BENEFITS ARE:
• Huge underground collection capacity
• Vertical design compacts waste
• Long emptying intervals
• High collecting efficiency
• Low emissions
MOLOK OY

31. 31
RAUMASTER
GLOBAL LEADER IN MATERIAL HANDLING SYSTEMS
SOLID FUEL AND BIOMASS HANDLING
• Fuel receiving, screening, crushing, storage,
reclaiming & conveying systems
• Fuel feeding and ash handling systems
• Recovery boiler, lime kiln and smelting plant
conveyor systems
WOOD HANDLING
• Wood rooms, chip and bark storage,
screening, receiving and conveying
• EPC projects
SERVICE
• Retrofits, service audits, field services,
maintenance, repairs, overhauls
raumaster.fi

32. 32
RAUMASTER
CUSTOMER BENEFITS
• Low maintenance cost, high availability, reliability and
efficiency
• Proven technology and experience from handling different
types of materials
EXAMPLES OF OVER 3300 REFERENCE PROJECTS
• Wood, chip and bark handling
EPC Altri Group Celtejo Pulp Mill, Portugal
• Chip and bark handling
Arauco Nueva Aldea Mill, Chile
• Wood room
Ilim Group Bratsk Mill, Russia
• Bio fuel, RDF, TDF and sludge receiving, feeding and ash handling
systems Sumitomo Heavy Industries, Nippon Pulp and Paper
Asahikawa Mill, Japan
• Coal, biofuel, bottom ash, sand, limestone handling systems for
4 boilers
Amec Foster Wheeler Energia, Korea Southern Power, Samcheok,
South Korea
• Fuel yard, biofuel and coal receiving, screening, crushing and
feeding systems ash conveying systems
Fortum Värme, Värtaverket, Stockholm, Sweden

33. 33
SAALASTI
MANUFACTURER OF INNOVATIVE HEAVY-DUTY BIOENERGY MACHINERY
• Machines are used mostly in big power
plants and wood rooms
• Main products are different types of
stationary forest-based biomass
chippers, crushers, cutters and bark
dewatering presses. The company
delivers entire biomass processing
stations.
• SAALASTI CHIPPER H (horizontal feed) is
suitable for power plants, biomass terminals
and other high-volume applications where
correct particle size and reliable operation
are a necessity

34. 34
SAALASTI
MANUFACTURER OF INNOVATIVE HEAVY-DUTY BIOENERGY MACHINERY
• SAALASTI CRUSH H is designed for
effective crushing of stumps and other
forest residues. It is a high-capacity crusher
for processing stumps, while being versatile
to be used to process any other wood
based biomass.
• SAALASTI CRUSH V is a real universal
crusher, which has become an industry
standard in many countries. It is used at
paper and pulp mill woodrooms, sawmills
and power plants.
www.saalasti.fi

35. 35
SIMOSOL
RAW MATERIAL SOURCING ANALYSIS FOR BIOENERGY & FOREST INDUSTRY INVESTMENTS
• Raw material sourcing analysis for bioenergy
& forest industry investments
• Full pre-feasibility analysis of bioenergy plant
investments with partners
• Feedstock supply chain and forest management
optimization software
• Valuation of forest assets
CUSTOMER BENEFITS
• Better investment decisions based on quantitative
analysis
• Maximized profit through minimized operational
costs and optimization

36. 36
REFERENCES, ONGOING PROJECTS
• Biomass Atlas Pakistan and Vietnam; World Bank funded
ESMAP project – Nationwide mapping of biomass resources and
availability for industrial scale power generation
• Optimized long term wood sourcing plan for Metsä Forest
Podporozhye, Russia – Minimizing wood sourcing cost at
terminals/saw mill taking into account road building investments,
harvesting and transport. Included remote sensing based mapping
of forest resources.
• Optimized wood chip delivery chain; Finland – maximizing the
profit of weekly chip deliveries to power plants taking into account
the operational costs and the energy content development in the
wood chips
WHAT CAN WE OFFER FOR THE TARGET
COUNTRY/INDUSTRY SECTOR?
• National / regional analysis of biomass resources and
their sustainable utilization
• Analysis services and operational tools to minimize
operational costs / maximize profit
SIMOSOL

37. 37
BIOMASS
AND WASTE
ENERGY GENERATION FROM

38. 38
GLOBAL MARKET SIZE
FOR WASTE TO ENERGY
AND BIOENERGY IN 2016
IS ESTIMATED TO BE
46 bn USD
WHILE IN 2020 THE MARKET
SIZE IS INCREASED TO
85 bn USD
(Frost & Sullivan)
ENERGY GENERATION: TRENDS
30%OF FINNISH
ENERGY
CONSUMPTION IS
BASED ON WOODY
BIOMASS AND
PEAT
45%MORE ENERGY
BY 2030
AS THE WORLD'S
POPULATION KEEPS
GROWING, WE WILL
NEED
14%OF GLOBAL
ENERGY
CONSUMPTION
TODAY BIOMASS
REPRESENTS
AROUND

39. 39
ENERGY GENERATION: FINNISH OFFERING
Ekokem Oyj

40. ARITERM OY
FOR A SUSTAINABLE FUTURE
ARITERM IS A FINNISH MANUFACTURER OF
BIOHEATING SYSTEMS
Our main products are bio boilers used for heat production, bio burners and
bio heating system solutions.
Modern bio heating is an easy and affordable way to take care of heating. The
bio heating solutions developed and manufactured by Ariterm Oy provide an
efficient and reliable way of benefiting from different kind of bio fuels.
RECYCLING SOLUTIONS
Ariterm is specializing on recycled wood combustion systems, and technology
is feasible to combust recycled wood with metallic impurities and biofuels with
low ash melting temperature with Multijet – combustion technology.
kimmo.kantalainen@ariterm.fi
+358 400 541 721
www.ariterm.fi

41. ARITERM OY
CAREFUL PLANNING LEADS TO GOOD RESULTS
ARITERM BIOJET MULTI
BIO BURNER FOR DEMANDING HEATING SYSTEMS FOR
WOOD PELLETS
• Combines best features of bio burners: water-cooled structure
and moving grate technology
• Extended cleaning intervals
• High efficiency (over 95 %)
• Automatic ignition
ARITERM BIO BOILERS
ECONOMICAL CENTRAL HEATING BOILER
Cleanly and efficiently burning bio burner needs to be paired
with a boiler that is able to transfer produced heat to the boiler
water with high efficiency. Ariterm Bio boilers are available in
several power classes.
• Nominal output 120 – 3 000 kW
• Compatible with Ariterm’s bio burners
• Max. working pressure 4 - 10 bar
• Can be equipped with a domestic hot water heat exchanger
• The boiler has the necessary hatches for cleaning and fire
maintenance.
• Insulated steel ash chamber
• Ash screws
kimmo.kantalainen@ariterm.fi
+358 400 541 721
www.ariterm.fi
ARITERM MULTIJET
BIO BURNER FOR DEMANDING HEATING SYSTEMS
• 100 % self cleaning grade structure, designed for recycled
wood combustion.
• Capable to handle metals with low melting point (Aluminium,
Brass)
• Feasible for biofuels with low ash melting point

42. 42
AURELIA TURBINES OY
THE MOST EFFICIENT SMALL GAS TURBINES IN THE WORLD
40%
AURELIA TURBINES
PROVIDES ROBUST,
WORLD-CLASS GAS
TURBINES WITH
ELECTRICAL
OUTPUT OF 400 KW
AND SUPERIOR
ELECTRICAL
EFFICIENCY OF
ABOVE
CUSTOMER BENEFITS
Outstanding power-to-steam
ratio
SME industrial sites with steam and
power needs can benefit from the
highly efficient CHP enabled by the gas
turbine combined with a heat recovery
boiler providing steam. Such installation
can lower the primary energy need by
some 40%.
Excellent fuel flexibility
The turbines are built for multiple
applications such as CHP, steam
process, O&G, and can utilize a wide
range of both, renewable and non-
standard fuels.

43. INEXPENSIVE, EMISSION FREE ENERGY EFFICIENTLY FROM SOLID BIOMASS
BIOFIRE OY
Wood chips
Peat
Pellets
Waste grain
INPUT
 More than 30 years of experience in biomass burning and
heating plant business. This ensures the best technical know-
how is used to Biofire Oy products and services supplied
 Biofire Oy manufactures and supplies highly robust and long-lasting heating systems
and heating plants which use solid biomass as fuel. Its Palokärki –products are
designed for demanding North European conditions
 Fully automated heating systems and heating plants in categories from 60 kW up to 5 MW
OUTPUT
Hot water for
heating or for
steam generating
Hot air for
heating or drying
60 kW - 5 MW
100 kW - 3,2 MW

44. BIOFIRE OY
BIOFIRE TECHNOLOGY AND PRODUCTS ARE SUITABLE FOR MANY PURPOSES
 For grain drying 100 – 1600 kW For timber drying 500 – 5000 kW  For district heating 500 – 5000 kW
 Heating containers 60 – 700 kW
 For farmers / small industry 60 – 500 kW
 Smart technical solutions for fuel handlingFor industrial / commercial heating
purposes 500 - 5000 kW
For private / industrial heating
purposes 60 - 500 kW

45. 45
CITEC OY AB
MULTI-DISCIPLINE ENGINEERING AND INFORMATION MANAGEMENT SERVICES
Citec provides multi-
discipline engineering and
information management
services to the energy
industry and other
technology-dependent
industries. It helps its
customers to deliver
sustainable solutions that
supply the society with the
energy it needs.
CUSTOMER BENEFITS
• CITEC offers complete services and consulting
within all project phases: feasibility, concept
studies and pre-engineering, basic and detailed
engineering as well as site services, built
drawings and technical documentation.
• The services range from single discipline
engineering to EPCM services for managing
the whole project, or specific parts of it.
• Global resourcing enables Citec to to select the
best resources from different countries both in
terms of competence and cost efficiency.
• Global track-record, capability and references
to back up.

46. 46
CITEC OY AB
MULTI-DISCIPLINE ENGINEERING AND INFORMATION MANAGEMENT SERVICES
REFERENCES,
ONGOING PROJECTS
• KEA waste to energy plant,
Klemetsrud, Norway
• ALSTOM, BIOMASS-FUELLED
CHP PLANT, France
• WESTENERGY PLANT,
Mustasaari, Finland
• VANTAAN ENERGIA waste to
energy plant, Vantaa, Finland
CITEC provides complete
engineering and information
management services for waste to
energy projects as well as services
for EPC contractors, utilities
(power and heat producers), plant
owners and power developers.
The services are provided for power
production, district heating & cooling
and for CHP generation.

47. 47
EERA WASTE REFINING
WASTE TO ENERGY UTILITY BUSINESS
EERA WASTE
REFINING concept
includes three major
innovations:
The Bridgehead Model, which secures
systemic demand and supply as well
as builds cooperation in target
countries
A potential dominant design in waste
management
An advanced operations and
maintenance model
A serial utility business with
a high growth potential by
establishing, running and
trading (BOOT) Waste-to-
Energy facilities mainly outside
OECD.
REFERENCES
The first NEWCO is ARAFIN in Oman
serving GCC, Iran and North Africa
and the first deal is closed in Oman.
A Chilean company EWR Chile has
been founded with four projects
under development. Turkey and Iran
are developing fast with several
projects under development.

48. 48
THREE PARALLEL ROUTES TO UTILIZING WASTE BASED FUEL ‘SRF’
Our offering provides three ways to convert the energy content of waste into a
useful form and usage
Existing gas or
coal fired power
plant
Gasifier
for fuel
conversion
Waste refining
facility
Cement factory
Power plant
based on a
fluidized bed
boiler
Pat.pend solution
for enhanced oil
produciton
Electricity grid
Industrial
processes
Cooling
Water desalination
Municipal waste
Industrial waste streams
For recycling:
metals, glass
Non-usable to landfill
(max 20 % of the input
Customer interface
Solid Recovered Fuel (SRF)
SRF
SRF
Electricity & steam
Gas
Case a) SRF
Case b) WtG
Case c) WtEl&S
EERA WASTE REFINING

49. 49
EFIREC OY
EFFICIENT RENEWABLE ENERGY SERVICES AND SOLUTIONS
• We provide renewable
energy and energy
efficiency services and
solutions.
• Our solutions provide
economic and ecological
energy from a local
source, district heating
(300 kW - 10 000 kW) as
well as electrical energy
for larger buildings and
industry.
• We have also waste heat
energy and district cooling
solutions and waste
treatment in our portfolio.
• We have been one of the
pioneers in waste treatment
plants as a builder, so we
have a comprehensive
know-how in this industry.

50. 50
EFIREC OY
EFFICIENT RENEWABLE ENERGY SERVICES AND SOLUTIONS
• Our annual efficiency is
of the highest class and
our plants have a wide
operating range.
• This reduces the costs
significantly: with the
same amount of fuel we
can provide more heat
energy than our
competitors.
• Our power plants are
highly automated.
• The modular method of
construction ensures
consistently high quality
and fast and cost-efficient
deliveries.
• Installation phase is
extremely short.

51. 51
ENVIROBURNERS
INDUSTRIAL BURNERS FOR ALTERNATIVE FUELS
APPLICATIONS:
• Switch from fossil to biofuels
• Utilize waste streams for energy
production
• Compliance with current and future
emission requirements
Over 600 deliveries to all continents
Supplier for: Alstom, Amec FW,
Andritz, Outotec, Valmet

52. 52
ENVIROBURNERS
INDUSTRIAL BURNERS FOR ALTERNATIVE FUELS
ENVIROBURNERS’ REFERENCES
• Largest Waste Gas Flare (35 MW) for the Oki pulp mill in Indonesia
• Total 73 Non Condensable/odorous Gas burners and flare incinerators
delivered
• Several conversions from fuel oils to wood dust (largest project 120 MW)
• Total 51 wood dust burners delivered
• Several waste/biomass Gasification Gas burner deliveries
• Over 160 start-up burners for CFB and BFB boilers and gasifiers deliveries
• Over 200 other multifuel industrial burners for non-conventional fuels

53. 53
ICVF Ltd
DESIGNING WASTE-TO-ENERGY EPCM PROJECTS
• ICVF Waste to Energy
plant deliveries enable
environmentally friendly
and economically feasible
electricity production
turning Municipal Waste
to electricity and other
side products.
• Technologies and
processes developed for
solid waste incineration in
Finland have been tested in
variety of harsh climates.
• Applying these proven
methods to municipal
waste, an average of 20
MWh of electricity can be
produced from the volume
of each 1 million people
waste.

54. 54
ICVF Ltd
DESIGNING WASTE-TO-ENERGY EPCM PROJECTS
• ICVF delivers complete
Engineering,
Procurement and
Construction
Management shipment
that complies with local
and international
standards
• ICVF can help with
financing arrangements
with International
financiers.
CONTACTS:
• Mr Ari Tuutti
+358 405 822 225
ari.tuutti@devecon.fi
• Mr Asko Tiusanen
+ 358 400 701 982
asko.tiusanen@catalyst.fi

55. 55
KPA UNICON
CUSTOMIZED AND MODULAR BOILER AND POWER PLANT SOLUTIONS
SOLUTIONS
• Turn-key or process
delivery for power plants
using biomass as well as
oil and gas
• Financing solutions
including leasing contract
• Service solutions
• PlantSys system for remote
assistance and control
CUSTOMER BENEFITS
• Pre-studies and feasibility calculations to optimize
the best project solution
• Support during the whole lifecycle of the plant for the
best efficiency
• KPA Unicon takes responsibility for operation and
maintenance of the plant
• Guaranteed efficiency, minimum load 15 % with
automated operation
• KPA Unicon plants can be manufactured as
modules - Modular structure minimizes the delivery
time of the plant and installation time on site

56. CUSTOMIZED AND MODULAR BOILER AND POWER PLANT SOLUTIONS
56
KPA UNICON
ONGOING PROJECTS
• STORA ENSO WOOD PRODUCTS OY LTD,
Honkalahti sawmill, Finland
• UNICON BIOGRATE 18, 1 x 17,7 MWth,
Fuel: Bark, Sawmill residues
• STORA ENSO, ALA SAWMILL, Ljusen, Sweden
• Unicon Biograte 15, 1 x 15 MWth,
Fuel: Sawmill residues, bark
• PORVOON ENERGIA LTD, Loviisa, Finland
• Unicon Biograte 10, 1 x 10 MWth,
Fuel: Bark, woodchips
• ARCELORMITTAL SOUTH AFRICA,
Vanderbijlpark, South Africa
• UNICON ST50, 2 X 25 MWTH, steam boiler
plant, Fuel: Blast furnace gas / Coke oven gas

57. 57
NOCART
PROVIDING POWER
Nocart is a Finnish environmentally-
conscious energy company using multiple
sources of energy to produce high-quality
electricity for use and storage. Nocart
serves the global demand at three levels:
Power Management Unit (PMU), Power
Systems and Power Sales.
Nocart solutions cover W2E and other
renewable and hybrid power systems.
www.nocart.com

58. NOCART
FOR USE AND STORAGE
www.nocart.com
Nocart PMU is a unique product for the
production of high-quality, reliable, flexible, and
green grid-independent or grid-connected power
from any source for own use, sale, and back-up.
Connectivity to the Smart Grid of the future
enables feeding in and selling power back to the
grid. Payback time for W2E solutions is typically
4-7 years.
Nocart PMU can be connected to many types
of own or external sources of energy:
Industrial or animal waste, wind, hydro, wave,
gas motor, sunlight, brake energy, biofuel, etc.

59. 59
NORDAUTOMATION
HEAT AND POWER WITH MULTI-BIOFUEL TECHNOLOGY
Nordautomation’s long
experience in mechanical,
electrical and automation
engineering and the
company’s own factory
facilities make total
responsibility deliveries
possible.
EKOHELL – COMPACT 0,5 – 3 MW
BIOENERGY STANDARD SOLUTION POWER PLANT
• Ekohell Compact is a ready made fully equipped
container, with or without fuel storage
• Multi-biofuel power plant
• Uninterrupted fuel supply and backfire prevention
• Rotating self improving grateless combustion furnace
• Efficient combustion process and low emissions
• High efficiency
• Fully automated and instrumented systems
• Fast delivery
• Financial leasing possibility
• Ekohell 1,5 - 12 MW models are also available

60. 60
NORDAUTOMATION
HEAT AND POWER WITH MULTI-BIOFUEL TECHNOLOGY
EKOHELL biofuel
power plants produce
heat and also electric
power if required
The plant has a stable
process even at low
power.
Uninterrupted fuel
supply and backfire
prevention by a
hydraulic piston fuel
feeder, which also
tolerates off-specified
fuel.
EKOHELL -COMPACT
standard solution adjusted
for different needs and
customer segments,
such as:
• Greenhouse industry
• Agriculture industry
• Wood processing
• District heating, etc.
With the rotating self
improving grateless
combustion furnace
the plant burns peat,
bark, wood chips,
straw and other
biomass efficiently
and without clogging.
EKOHELL COMPACT
is a fully automated
unit.
The Finnish company
Nordautomation
ensures overall delivery
responsibility.

61. 61
PROTACON
SOLUTIONS FOR ENERGY PRODUCERS AND ENERGY SERVICE COMPANIES
EXPERIENCED ENGINEERS TO HANDLE PROJECTS
Protacon’s services encompass consulting, design and
engineering, implementation, turn-key deliveries and
maintenance & upkeep.
Long-term customer relationships, commitment to deliveries and
an open-minded approach to modern technologies are the
backbone of Protacon’s operations.

62. 62
PROTACON
CUSTOMER BENEFITS
Protacon enhances its customers’ competitive
advantage with solutions that create new
business models, streamline daily work,
increase production quality, improve efficiency
and free up resources to allow time for
creativity.
Key Products:
• ONCE: Customers have reported less than
2-month payback time
• STC (Steam Turbine Control ) A new
control- and protection system allows to
use higher pressure in steam turbine
REFERENCES, ONGOING PROJECTS
• N:o1 in Finland - 70% of all energy
produced using solid fuels in Finland are
handled by ONCE fuel management
platform
• 20 pc STC projects in 3 year
• Ongoing project:
• UPB Fortum Klaipeda, Liettua: ONCE
• Several automation upgrade projects
to district heating plant with remote
monitoring application
• Metsä Fibre Oy Rauma; STC project
SOLUTIONS FOR ENERGY PRODUCERS AND ENERGY SERVICE COMPANIES

63. 63
VALMET
Valmet - Summary
• A leading process technology, automation and services
provider for pulp, paper, energy industries
• Unique and market’s widest offering including process
technology, automation and services
• 12,000 professionals serving global customer base
• One of the world’s 300 sustainability leaders
• Net sales EUR 2.9 billion
• Almost half of the sales from stable Services and
Automation businesses
• Increasing global demand of tissue, board, pulp and
energy creates long-term growth possibilities
• Vision to become the global champion in serving our
customers
www.valmet.com
TECHNOLOGIES, AUTOMATION AND SERVICES FOR THE PULP, PAPER AND ENERGY INDUSTRIES

64. 64
Valmet’s energy solutions
 Valmet is a reliable technology partner in changing
energy markets. We know how to combine energy
solutions based on biomass, waste and fossil fuels. We
enable you to make the most out of them for energy
generation.
 Together we can develop innovative solutions based on
our decades of experience and wide technology, services
and automation offering.
 Our offering covers process technologies – combustion
and gasification - for biomass, waste (RDF, SRF) and
multifuel solutions.
 A multifuel boiler gives the flexibility to choose the most
economic fuel based on availability and price. Valmet’s
HYBEX and CYMIC boilers, CFB gasifiers and air
emission control systems ensure high efficiency and
reliability with low emissions – even with the most
challenging fuel combinations. Our advanced services
and automation solutions improve the reliability and
performance of your processes.
VALMET
VALMET’S ENERGY SOLUTIONS

65. WOIMA Corporation
TURNING WASTE INTO WELFARE
WOIMA is a Finnish modular waste-to-energy
power plant supplier with the aim to mitigate
waste-related problems in developing
countries. We offer a turn-key solution that
simultaneously
• Significantly reduces waste landfilling
• Delivers a variety of energy commodities
• Cuts down waste logistics costs
Our fully containerized wasteWOIMA® 10
power plant
• Can handle a wide variety of fuels
• Offers excellent energy efficiency
• Fits perfectly in off-grid solutions
• Has a quick roll-out time
• Is easy to relocate
www.woimacorporation.com

66. WOIMA Corporation
TURNING WASTE INTO WELFARE
KEY BENEFITS
Local fuel & energy supply
Utilization of locally available fuel streams
(waste) to produce energy commodities based
on local needs
Minimized air, land and water emissions
Significant reduction of green house gas
emissions, landfill leachate water quantity and
ground pollution
Economic benefits for all stakeholders
Savings in waste management, local job
creation and potential for new enterprising
spread welfare throughout the community
Low CAPEX / OPEX
Robust design with high level of automation
ensures long life span, simple maintenance,
short payback time and excellent ROI

67. 67
ÅF-Consult Ltd.
STATE-OF-THE-ART CONSULTING AND ENGINEERING SERVICES
www.afconsult.com
CIRCULATION ECONOMY
Ekokem, Circulation Economy Village, Riihimäki, Finland
ÅF Consult Ltd. is an independent
consulting and engineering company.
We have been involved in design and
implementation over 3 Mt/a WtE and
700 MWe biomass based power plants
during the last 10 years.
We are leading provider of
consultancy, engineering and project
management services for WtE and
Biomass based power plant projects in
Scandinavia.
We operate globally and with a one
stop shop approach with our extensive
partner network.

68. ÅF-Consult Ltd.
RECENT WASTE TO ENERGY ASSIGNMENTS
ÅF is currently active in around 90 countries
ÅF has offices
ÅF has carried out projects
Year Client Project ÅF Services Capacity
2016
Lenders and EPC
provider
WtE plant in Kuwait
Lenders
technical
advisor
1000kt/a
2016 Istac WtE plant in Turkey OE Services 1000kt/a
2014-
2016
Riikinvoima Oy
Varkaus WtE CHP
Plant
OE Services 145kt/a
2012-
2016
Tammervoima Oy
Tarastenjärvi WtE
CHP Plant
EPCM 150kt/a
2009-
2013
Fortum Oyj
Klaipeda WtE CHP
Plant
EPCM 272kt/a
2008-
2013
Eesti Energia Iru WtE CHP Plant OE Services 240kt/a
2010-
2012
Laanilan Voima
Oy
Oulu WtE Plant EPCM 120kt/a
2006-
2008
Kotkan Energia
Oy
Kotka WtE CHP
Plant
EPCM 100kt/a
2005-
2007
Ekokem Oy Riihimäki WtE Plant EPCM 150kt/a
www.afconsult.com

69. BIOFUEL
PRODUCTION
AS A FUTURE
OPPORTUNITY

70. 70
ADVANCED LIQUID
(bioethanol and biodiesel)
biofuels and BIOGAS can
be produced from waste
and residue-based raw
materials e.g. animal and
fish fats, used cooking oil,
organic fraction of MSW,
sawdust etc. Landfill gas
recovery is an interesting
opportunity
BIOFUEL PRODUCTION: TRENDS
EFFICIENT AND
SCALABLE BIOGAS
SOLUTIONS FOR
ENERGY
INDEPENDENCY BY
REPLACING
IMPORTED FOSSIL
FUELS AND CREATING
LOCAL JOBS
80%COMPARED TO
TRADITIONAL FUELS
BIOFUELS CAN REDUCE
GREENHOUSE GAS
EMISSIONS BY AS
MUCH AS
Finnish companies
have focused their
development on
ADVANCED FUEL
PRODUCTION
technologies also from
challenging feedstock
and hence can offer
unique solutions

71. 71
BIOFUEL
PRODUCTION:
FINNISH OFFERING

72. 72
BIOGTS LTD.
INDUSTRIAL BIOGAS AND BIODIESEL POWER PLANT MANUFACTURER AND EPC CONTRACTOR
Designing, building and operating
utility-scale biogas and biodiesel
plants.
Complete next generation waste
management solution for Municipal
Solid Waste (MSW).
Solid background in the research and
development of biogas and biodiesel
process technologies.
CUSTOMER BENEFITS
• Completely new way of building biogas and biodiesel
power plants: Standardized industrial production,
modular structures, easy to scale and retrofit.
• Lowest Capex in the market with low annual Opex.
High energy efficiency. Highest energy yield per
reactor and fastest breakeven period.
• Quick “plug-in”installation and start-up
• Continuously operated, fully automated, remote
controlled process

73. 73
BIOGTS LTD.
RENEWABLE ENERGY PRODUCTION, BIOGAS PLANTS AND LANDFILL GAS UTILIZATION
WHAT CAN WE OFFER FOR
THE TARGET
COUNTRY/INDUSTRY SECTOR?
• Compact and standard solution for
treatment of solid waste.
• Scalable from farm scale to waste
treatment solution for metropolises
• Robust process that handles wide
variety and quality of feedstock.
REFERENCES,
ONGOING PROJECTS
• Biogas plant for treatment of municipal waste,
Haminan Energia Ltd., Virolahti, Finland
• Biogas plant for treatment of agricultural waste,
Natural Resources Institute, Sotkamo, Finland
• Biodiesel plant for treatment of used cooking oils
and animal fats, BioMpower Ltd. Laukaa, Finland
• Biogas plant for treatment of municipal waste,
Mustankorkea Ltd., Jyväskylä, Finland

74. 74
DORANOVA
RENEWABLE ENERGY PRODUCTION, BIOGAS PLANTS AND LANDFILL GAS UTILIZATION
Design, permitting, feasibility studies,
turnkey deliveries, maintenances
Production of electricity, heat,
biomethane and fertilizer products
KEY CONCEPT 1:
Usage of organic waste streams and
energy crops for biogas production
KEY CONCEPT 2:
Landfill gas collection and energy
production
CUSTOMER BENEFITS
• Own energy production and/or waste
management
• Large variety of technologies combined
according customer needs
• Fertilizer production
• Reduction of greenhouse emissions

75. 75
DORANOVA
RENEWABLE ENERGY PRODUCTION, BIOGAS PLANTS AND LANDFILL GAS UTILIZATION
WHAT CAN WE OFFER FOR
THE TARGET
COUNTRY/INDUSTRY
SECTOR?
• Renewable energy production from
biomass and organic waste, biogas
plants
• Landfill gas utilization systems,
production of heat and electricity
• Feasibility studies and technology
conceptualization projects
REFERENCES,
ONGOING PROJECTS
• Jepua biogas plant, Finland
• BIWASE landfill gas utilization,
Vietnam
• Tartu landfill gas utilization and
leachate water treatment, Estonia

76. 76
DUCTOR OY
UNIQUE FERMENTATION TECHNOLOGY THAT SERVES BIOGAS PRODUCTION
Unique fermentation technology
that serves biogas production
for nitrogen control and process
stabilization.
THE DUCTOR PROCESS
reduces biologically the amount of
nitrogenin the substrate prior to
The anaerobic digestion process
The process consists of two
steps: fermentation and stripping
CUSTOMER BENEFITS
• Improved turnover:
avg. +14%
• Decreased feedstock costs:
avg. 50%
• Short payback time:
4-5 years

77. 77
DUCTOR OY
UNIQUE FERMENTATION TECHNOLOGY THAT SERVES BIOGAS PRODUCTION
REFERENCES,
ONGOING PROJECTS
Pilot and laboratory in Finland
Sales agreements in Germany
International recognition;
GCCA, Fraunhofer UMSICHT,
HORIZON 2020
WHAT CAN WE OFFER FOR
THE INDUSTRY SECTOR?
• Improved operational
performance
• Social and environmental
benefits
• Competitiveness among
renewable energy

78. 78
ENVOR PROTECH
ENVOR PROTECH offers
high-class specialist
services in technology,
design, project manage-
ment and industrial
economics. The services
also include equipment and
plant deliveries.
SERVICES:
• Project management and engineering services in
the fields of process and environmental technology
• Process and plan design services
• Waste management: Focus is especially on anaerobic digestion
of organic matter (biogasification).
The biogasification technology is based on the HLAD (High
Loaded Anaerobic Digestion).
• Process technology
• Waste water treatment: Envor Protech designs waste water
pumping stations and equipment buildings. The scope of design
includes general arrangement plans, detail design of pump
tanks, equipment buildings and other equipment. The company
also designs waste water unit processes and other waste water
solutions for the process industry and industrial plants.
• Equipment and plant deliveries
TURNING BIOWASTE TO BIOGAS AND VALUABLE FERTILIZERS

79. 79
ENVOR PROTECH
REFERENCES
Kunming, China (2014)
Capacity: 182 500 t/a
Waste type: WWTP sludge
Forssa, Finland (2008-2011)
Capacity: 84 000 t/a
Waste type: WWTP sludge, biowaste grease pit sludge,
industrial sludge
Hämeenlinna, Finland (2012)
Capacity: 17 000 t/a
Waste type: Concentrate & solid waste from bioethanol plant
Rayong, Thailand (2004)
Capacity: 31 000 t/a
Waste type: Biowaste vegetable & fruit waste, municipal sludge
TURNING BIOWASTE TO BIOGAS AND VALUABLE FERTILIZERS
CUSTOMER BENEFITS
• Environmentally sustainable,
energy efficient and economical
solution for biodegradable waste
treatment
• Turnkey solutions, tailored for
your need
• Reduce waste amount over 50 %
• Trustable solution with high
utilization rate
• Use of biogas for CHP-production
or upgrade to fuel

80. 80
FINRENES OY
SOLUTIONS IN BIOENERGY AND BIOFUELS
Finrenes Oy is a company in
renewable energy business,
providing solutions in
bioenergy and biofuels
• Our product is a waste biomass pre-
treatment device
• Our key concept is: traffic fuel, heat
and power production from second
generation waste biomass
• Our technology enables both biogas
and heat & power production from
widest selection of waste biomass
with low operating costs
50%– CAPEX SAVINGS
INCREASE
BIOGAS SPEED
USE WASTE
BIOMASS
TWICE
– PROFIT INCREASE
FROM WASTE
BIOMASS
USE OWN
ENERGY FOR
PRETREATMENT
AND DRYING
– OPEX SAVINGS
PRODUCE
TRAFFIC
FUEL
WITHOUT
ENZYMES
– OPEX SAVINGS

81. HONKAJOKI OY
Wealth by Recycling - Honkajoki animal by-product plant
Environmental protection is crucial in today’s world. All solutions that reduce
waste are in everyone’s interest.
The Honkajoki production plant utilises animal by-products, such as by-
products from slaughterhouses, other animal by-products, dead cattle and
pets, carcasses, pigs, fowl, horses, food waste, and plant-based waste.
Nothing is left unutilised!
Our recycling process is a highly refined and carefully regulated operating
model that returns natural raw materials to nature for reuse.
The operating principle behind the Honkajoki recycling plant of animal by-
products is simple: unutilised animal by-products are turned into easily
marketable raw materials for the fertilizer industry, the manufacture of
fuels, and the production of feed, for example, as well as energy and clean
water that be sold to other parties.
www.honkajokioy.fi

82. AGRO ECOLOGICAL OPERATING MODEL - We create growth through recycling –
HONKAJOKI OY
www.honkajokioy.fi
This high-tech “Honkajoki by-product plant”
concept is a valuable investment with an
operational model that can be expanded to a
complete, self-sufficient and ecological
production concept.

83. 83
St1
A PIONEER IN WASTE-BASED BIOETHANOL PRODUCTION
St1 is a Finnish energy company operating in the Nordics, implementing our vision to be
the leading producer and seller of CO2-aware energy. We research and develop
economically viable, environmentally sustainable energy solutions to replace fossil fuels.
St1 has a network of ~1450 St1 and Shell service stations. Our oil refinery is one of the
world’s most energy-efficient refineries and our goal is to transform it into a biorefinery.
An advanced ethanol plant is already integrated into it.
One of St1’s associated companies is the largest producer of wind power in Finland. We
also have an industrial-scale geothermal pilot heat plant project.
Our advanced ethanol production plants are based on our own technology and use
feedstock outside the food chain: industry residues and waste. We develop waste-to-
ethanol business and make strong R&D investments in advanced biofuels.
• Revenue 5800 million euros (2014)
• Employees 700
Etanolix®
plants refine waste and
residues which are rich in
starch and sugar into
advanced ethanol and
valuable side products
Cellunolix®
enables the use of sawmill
side products like saw dust
and chips in ethanol
production
Bionolix®
plant enables the production
of advanced ethanol and
biogas from municipal and
commercial biowaste
www.st1biofuels.com
www.st1.eu

84. 84
VTT TECHNICAL RESEARCH CENTRE
OF FINLAND LTD.
R&D SERVICES, PILOTING AND TESTING RELATED TO BIOENERGY AND WASTE-TO-ENERGY
VTT provides technological
background for business related
to new solutions and existing
assets
• Small scale CHP+C for industry, off-grid
and rural areas
• High efficiency Waste-to-Energy and
metals recovery
• Optimized boiler operation, lifespan
extension and plant economy
CUSTOMER BENEFITS
Efficient use of available, sustainable
resources for heat power and cooling
secure the profitable energy supply in
changing policy environment and
challenging grid conditions
• Double your income in W-t-E
• World class piloting facilities available for your
testing
• Top class technology know how with 50 years
experience of boiler development

85. 85
VTT TECHNICAL RESEARCH CENTRE
OF FINLAND LTD.
R&D SERVICES, PILOTING AND TESTING RELATED TO BIOENERGY AND WASTE-TO-ENERGY
REFERENCES, ONGOING
PROJECTS
• Over 100 CFD modelling cases
of boilers world-wide
• Development of gasification
technology with 40% waste-to-
energy conversion rate
• Gasification, CFB and pyrolysis
pilot plants
What can we offer for the target
country/industry sector?
• Feedstock analysis and fuel
characterization
• Techno-economic appraisal and
feasibility studies
• Comprehensive knowledge of thermo-
chemical conversion of waste and
biomass to energy, heat and fuels

86. 86
WATREC LTD
GLOBAL LEADER IN MATERIAL HANDLING SYSTEMS
Biogas
Plant Our solutions
Wastewater
treatment
Expertise
OperationalPyrolysis
Watrec Ltd. is a Finnish company
specialized in biogas technology
and consultancy services for
environmental and energy
related issues.
www.watrec.com

87. 87
WATREC LTD
GLOBAL LEADER IN MATERIAL HANDLING SYSTEMS
References
• Riihimäki Biogas Plant - 75 000 t/a, 6 MW
• Materials: Sewage sludge, source
separated biowaste, OFMSW,
industrial sludge
• More referenes: Oulu BP, Kuopio BP,
Honkajoki BP and WWT, etc.

88. 88
OUR EXPERTISE AT YOUR SERVICE
Helena Sarén, Program Director
email. helena.saren@finpro.fi
tel. +358 40 343 3324
Saku Liuksia, Program Manager
email. saku.liuksia@finpro.fi
tel. +358 50 303 8326
Kirsi Koso, Program Coordinator
email. kirsi.koso@finpro.fi
tel. +358 50 463 2244 /
MORE INFORMATION
www.circularbioecofin.com