1. The document discusses a network reconfiguration project at SMKN 1 Cibinong to address problems with the existing network setup. 2. The existing network had four separate topologies and routers with their own IP and NAT configurations, preventing users on one router from connecting to those on another. It also struggled to support the large number of users and devices. 3. The proposed solution was to redesign the logical and physical network topologies, add new router configurations, and implement load balancing and failover methods on the routerboard. This aimed to improve network performance and support over 2,000 users.

1. IMPLEMENTATION USING LOAD
BALANCING AND FAILOVER
METHOD ON ROUTERBOARD AT
SMKN 1 CIBINONG
1

2. “The reason why I chose this title
is because network need to be
improve
2

3. Area will be discuss
1
2
Networking are needed at SMKN 1 Cibinong
3
Problems occur on existing network
Proposed solution by doing reconfiguration on
the local area network
?
4 The final result of network reconfiguration
3

4. Networking are needed at SMKN 1 Cibinong
Local network
 year-end assessment
computer-based (PATBK)
 Student attendance information
network using a fingerprint machine
 Usage of office hardware: Printer
internet
 National Exam Computer-based
(UNBK)
 Exchange data
 For student practice
1
4

5. Number of users must be served
2.062 Users
Number of users
98 Users
43 Users
2.201 Users
Students
Teachers
Staff
TOTAL
BACK
5

6. Problems occur on existing network
1. There are four seperated topology and router which have their
own IP NAT so users who connect to every router can’t connect to
another users from another router
2. Very large number of users and amount of end device which
connect exceeded number of users so often make performance
network device decrase
2
BACK
6
1
2

7. BACK

8. 3
Proposed solution by doing
reconfiguration on the local area
network
8

9. Solution will be proposed
1. Contrive new topology
2. Add new configuration on router
9

10. School map

11. logical topology

12. Physical topology

13. How I did my work
03
01 02
Survey and
collect data
Start working
Monitoring
and
maintenance
13

14. 14

15. 15

16. Failover flowchart scheme

17. 17
BACK

18. The final result of network reconfiguration4
18

19. CONCLUSION
After the network is run it
has been proven to improve
performance
On network devices and
optimal data traffic after
The result of using user
bandwidth is far from
maximum bandwidth
Provided by the ISP
19

20. 20
Thanks!
ANY QUESTIONS?