More Related Content Similar to ITR Grader Blade Catalogue (20) ITR Grader Blade Catalogue1. All manufacturers’ names, numbers, symbols and descriptions shown are for reference only. It is not
implied that any part listed is the product of those manufacturers
GRADER BLADES
See next page
ITR Grader
Blades for use on
most popular motor grader
makes
• Caterpillar ®
• John Deere®
• Komatsu®
• Volvo®
• Case®
• Galion®
• Champion®
• Sany®
✓Long Wear Life
✓Curved and Flat Profiles
✓ Heat-Treat & Carbon Options
✓ Serrated & Non-Serrated
✓Lengths from 2’-14’
✓Widths Ranging from 6”-16”
✓Nationwide Inventory!
2. All manufacturers’ names, numbers, symbols and descriptions shown are for reference only. It is not
implied that any part listed is the product of those manufacturers
GRADER BLADES
See next page
Standard Heat-Treated Curved Grader Blades
• Preferred blade for general construction, finish grading & road maintenance
• Curved design promotes optimal material penetration & flow
• High resistance to breakage
• Significantly longer wear life compared to Curved Carbon Blades (below)
• Universal 3”- 3”- 6” bolt pattern
• 44-52 HRC
Standard Heat-Treated Flat Grader Blades
• Recommended for HD road maintenance and development
• More wear life compared to Curved Grader Blades
• Superior breakage resistance
• Universal 3”- 3”- 6” bolt pattern
• 44-52 HRC
Standard Carbon Curved Grader Blades
• Cost effective option for high abrasion/low impact applications
• Typically used for general construction, finish grading & road maintenance
• Curved design promotes optimal material penetration & flow
• Shorter wear life compared to Curved Heat-Treated Blades (above)
• Universal 3”- 3”- 12” bolt pattern
• 28-32 HRC
Serrated Heat-Treated Curved Grader Blades
• Superior penetration of packed or froze material
• Curved design promotes optimal material penetration & flow
• Universal 3”- 3”- 6” bolt pattern
• 44-52 HRC
Serrated Heat-Treated Flat Grader Blades
• Recommended for HD road maintenance and development of
packed or frozen material
• More wear life compared to Curved Grader Blades
• Superior breakage resistance
• Universal 3”- 3”- 6” bolt pattern
• 44-52 HRC
3. All manufacturers’ names, numbers, symbols and descriptions shown are for reference only. It is not
implied that any part listed is the product of those manufacturers
GRADER BLADES
STD H/T STD CARBON SERRATED H/T STD H/T SERRATED H/T BOLT NUT
heat-treated edges (H/T) carbon edges only
5/8" 1093137 ˗ ˗ ˗ ˗ 3F5108 4K0367 5 ˗
3/4" 3G2166 ˗ ˗ ˗ ˗ 5J4771* 2J3506 5 ˗
5/8" 6G8623 ˗ ˗ ˗ ˗ 3F5108 4K0367 4 ˗
3/4" 3G2165 ˗ ˗ ˗ ˗ 5J4771* 2J3506 5 ˗
5/8" 9W1835 U42840 ˗ ˗ ˗ 3F5108 4K0367
THICKNESS WIDTH BOLT HOLE
3/4" 8"
MOUNTING HARDWARE
QUANTITY
FLAT
CURVED
5 4
5/8"
6"
8"
See next page
2 Foot Grader Blades
✓ Select your length
✓ Choose your preferred thickness
✓ Determine your bolt hole size
✓ Pick the most suitable blade type for your application
Easy to use
catalog!
Length
Width
Thickness
*2-3/4” long bolt listed for widest coverage. Some applications can use 4F7827 (2-1/4”) or 5J4773 (2-1/2”) bolts if preferred
4. All manufacturers’ names, numbers, symbols and descriptions shown are for reference only. It is not
implied that any part listed is the product of those manufacturers
GRADER BLADES
STD H/T STD CARBON SERRATED H/T STD H/T SERRATED H/T BOLT NUT
heat-treated edges (H/T) carbon edges only
5/8" 3G8016 9W2293 ˗ ˗ ˗ 3F5108 4K0367 9 6
3/4" ˗ 9W2294 ˗ ˗ ˗ 5J4771* 2J3506 ˗ 6
5/8" 3G7965 9W2309 ˗ ˗ ˗ 3F5108 4K0367 9 6
3/4" 1356738 9W2310 ˗ ˗ ˗ 5J4771* 2J3506 9 6
5/8" 9W2325HT 9W2325 ˗ ˗ ˗ 3F5108 4K0367 9 6
3/4" ˗ 9W2326 ˗ ˗ ˗ 5J4771* 2J3506 ˗ 6
5/8" 1321088 9W2328 ˗ ˗ ˗ 3F5108 4K0367 9 6
3/4" 1341773 9W2329 ˗ ˗ ˗ 5J4771* 2J3506 9 6
5/8" ˗ 9W2331 ˗ ˗ ˗ 3F5108 4K0367 ˗ 6
3/4" ˗ 9W2332 ˗ ˗ ˗ 5J4771* 2J3506 ˗ 6
5/8" 1321087 9W2338 8D3428 4Z8119-6 ˗ 3F5108 4K0367 9 6
3/4" 1093124 9W2339 8J8255 ˗ ˗ 5J4771* 2J3506 9 6
5/8" 1957178 ˗ ˗ 1359692 ˗ 3F5108 4K0367 9 ˗
3/4" 1093150 ˗ 4T3512 4Z8926 7T3600 5J4771* 2J3506 9 ˗
˗
1" ˗ ˗ ˗ 1359349 1359796 4J9058 2J3507 9
˗
3/4" 138104CUR3 ˗ ˗ ˗ ˗ 5J4771* 2J3506 9
1" ˗ ˗ ˗ 1386440 ˗ 4J9058 2J3507 9
1" ˗ ˗ ˗ 1093116
˗
3/4" ˗ ˗ ˗ ˗ 4T8800 5J4771* 2J3506 9
5/8"
3/4"
8"
10"
16"
1"
13"
13"
1-3/8"
1"
THICKNESS
1/2"
6"
8"
6"
8"
6"
8"
1-1/8"
16"
1-3/4"
2-3/8"
10"
QUANTITY
CURVED FLAT
WIDTH BOLT HOLE
MOUNTING HARDWARE
˗
1386542 4J9058 2J3507 9
˗
1093117CUR ˗ ˗ 1093117 ˗ 4J9058 2J3507 9
˗
See next page
4 Foot Grader Blades
STD H/T STD CARBON SERRATED H/T STD H/T SERRATED H/T BOLT NUT
heat-treated edges (H/T) carbon edges only
7 ˗
T145767 T145924 ˗ 4Z8129-6 ˗ 3F5108 4K0367
138103CUR3 ˗ ˗ ˗ ˗ 5J4771* 2J3506
5/8" ˗ T144356 ˗ ˗ ˗ 4K0367
3F5108
MOUNTING HARDWARE
BOLT HOLE
3/4" 8"
THICKNESS WIDTH
5/8" 8"
10"
1-3/8"
QUANTITY
CURVED FLAT
˗ 5
7 5
5/8"
3/4"
3 Foot Grader Blades
*2-3/4” long bolt listed for widest coverage. Some applications can use 4F7827 (2-1/4”) or 5J4773 (2-1/2”) bolts if preferred
5. All manufacturers’ names, numbers, symbols and descriptions shown are for reference only. It is not
implied that any part listed is the product of those manufacturers
GRADER BLADES
STD H/T STD CARBON SERRATED H/T STD H/T SERRATED H/T BOLT NUT
heat-treated edges (H/T) carbon edges only
5/8" 9J3862 9W2295 ˗ ˗ ˗ 3F5108 4K0367 11 7
3/4" ˗ 9W2296 ˗ ˗ ˗ 5J4771* 2J3506 ˗ 7
5/8" 9J3863 9W2311 ˗ ˗ ˗ 3F5108 4K0367 11 7
3/4" 1341779 9W2312 ˗ ˗ ˗ 5J4771* 2J3506 11 7
5/8" 7D4508 7T1640 7D4508ICE ˗ ˗ 3F5108 4K0367 11 7
3/4" T74752 9W2327 ˗ ˗ ˗ 5J4771* 2J3506 11 7
5/8" 7D4509 7T1641 ˗ 4T2967 ˗ 3F5108 4K0367 11 7
3/4" T74765 9W2330 ˗ 4Z8120 ˗ 5J4771* 2J3506 11 7
5/8" 3G7966 7T1642 3G7966ICE ˗ ˗ 3F5108 4K0367 11 7
3/4" T74757 9W2333 ˗ ˗ ˗ 5J4771* 2J3506 11 7
5/8" 9W6252 9W2340 9W6252ICE 4T3034 ˗ 3F5108 4K0367 11 7
3/4" 1441293 9W2341 8J8256 ˗ ˗ 5J4771* 2J3506 11 7
5/8" 4T2240 ˗ ˗ 7T3497 ˗ 3F5108 4K0367 11 ˗
3/4" T74774 ˗ 4T3511 ˗ 7T3601 5J4771* 2J3506 11 ˗
QUANTITY
˗ ˗ ˗ ˗ 4T8801 5J4771* 2J3506 11 ˗
5/8"
3/4"
3/4"
6"
8"
8"
THICKNESS WIDTH BOLT HOLE CURVED FLAT MOUNTING HARDWARE
10"
1"
1/2"
6"
8"
6"
8"
STD H/T STD CARBON SERRATED H/T STD H/T SERRATED H/T BOLT NUT
heat-treated edges (H/T) carbon edges only
5/8" 8D2786 9W2297 ˗ ˗ ˗ 3F5108 4K0367 13 8
3/4" 9J3660 9W2298 ˗ ˗ ˗ 5J4771* 2J3506 13 8
5/8" 8D2788 9W2313 ˗ ˗ ˗ 3F5108 4K0367 13 8
3/4" 3G1626 9W2314 ˗ ˗ ˗ 5J4771* 2J3506 13 8
5/8" 5D9553 7T1633 5D9553ICE ˗ ˗ 3F5108 4K0367 13 8
3/4" 9J3657 7T1637 ˗ ˗ ˗ 5J4771* 2J3506 13 8
5/8" 5D9562 7T1636 ˗ 4T2968 ˗ 3F5108 4K0367 13 8
3/4" 9J7701 7T1639 ˗ 4T2971 ˗ 5J4771* 2J3506 13 8
5/8" 5D9556 7T1635 5D9556ICE ˗ ˗ 3F5108 4K0367 13 8
3/4" T74759 9W2334 ˗ ˗ ˗ 5J4771* 2J3506 13 8
5/8" 5D9558 7T1634 5D9558ICE 4T3007 4T3007ICE 3F5108 4K0367 13 8
3/4" 7D1576 7T1638 7D1576ICE 4T3033 4T3033ICE 5J4771* 2J3506 13 8
5/8" 4T2244 ˗ ˗ 7T3499 ˗ 3F5108 4K0367 13 ˗
3/4" 4T2231 ˗ 4T2231ICE 7T3493 ˗ 5J4771* 2J3506 13 ˗
1"
5J4771* 2J3506
4T6502 ˗
˗ ˗ ˗ ˗
8"
5/8"
8"
3/4"
6"
8"
CURVED FLAT
QUANTITY
13
MOUNTING HARDWARE
THICKNESS WIDTH
6"
8"
6"
3/4"
1/2"
BOLT HOLE
10"
See next page
6 Foot Grader Blades
5 Foot Grader Blades
*2-3/4” long bolt listed for widest coverage. Some applications can use 4F7827 (2-1/4”) or 5J4773 (2-1/2”) bolts if preferred
6. All manufacturers’ names, numbers, symbols and descriptions shown are for reference only. It is not
implied that any part listed is the product of those manufacturers
GRADER BLADES
STD H/T STD CARBON SERRATED H/T STD H/T SERRATED H/T BOLT NUT
heat-treated edges (H/T) carbon edges only
5/8" 8D2787 9W2299 ˗ ˗ ˗ 3F5108 4K0367 15 9
3/4" 9J3659 9W2300 ˗ ˗ ˗ 5J4771* 2J3506 15 9
5/8" 8D2789 9W2315 ˗ ˗ ˗ 3F5108 4K0367 15 9
3/4" 3G1627 9W2316 ˗ ˗ ˗ 5J4771* 2J3506 15 9
5/8" 5D9554 7T1645 5D9554ICE ˗ ˗ 3F5108 4K0367 15 9
3/4" 9J3658 7T1626 9J3658ICE ˗ ˗ 5J4771* 2J3506 15 9
5/8" 5D9561 7T1643 5D9561ICE 4T2969 4T2969ICE 3F5108 4K0367 15 9
3/4" 7D1158 7T1624 7D1158ICE 4T2970 ˗ 5J4771* 2J3506 15 9
5/8" 5D9557 7T1644 ˗ ˗ ˗ 3F5108 4K0367 15 9
3/4" 4Z8785 9W2335 ˗ ˗ ˗ 5J4771* 2J3506 15 9
5/8" 5D9559 7T1623 4Z9020 4T3036 4T3036ICE 3F5108 4K0367 15 9
3/4" 7D1577 7T1625 7D1577ICE 4T3032 4T3032ICE 5J4771* 2J3506 15 9
5/8" 4T2242 4T2242CAR-6 ˗ 7T3498 ˗ 3F5108 4K0367 15 9
3/4" 4T2233 4T2233CAR-6 4T2233ICE 7T3494 7T3494ICE 5J4771* 2J3506 15 9
˗
3/4" ˗ ˗ ˗ D26515 5J4771*
˗ 2J3506 15
5J4771* 2J3506 15 ˗
˗
3/4" ˗ ˗ ˗ 4T8316 4Z8346 5J4771* 2J3506 15
THICKNESS WIDTH
6"
8"
5/8"
8"
6"
6"
8"
CURVED FLAT
˗ ˗ ˗ 4T6508 4Z8055
QUANTITY
MOUNTING HARDWARE
1-3/4" 13"
8"
10"
1"
1-3/8" 10"
BOLT HOLE
1/2"
3/4"
3/4"
See next page
7 Foot Grader Blades
*2-3/4” long bolt listed for widest coverage. Some applications can use 4F7827 (2-1/4”) or 5J4773 (2-1/2”) bolts if preferred
7. All manufacturers’ names, numbers, symbols and descriptions shown are for reference only. It is not
implied that any part listed is the product of those manufacturers
GRADER BLADES
STD H/T STD CARBON SERRATED H/T STD H/T SERRATED H/T BOLT NUT
heat-treated edges (H/T) carbon edges only
5/8" 8J7782 9W2301 ˗ ˗ ˗ 3F5108 4K0367 17 10
3/4" 9J3656 9W2302 ˗ ˗ ˗ 5J4771* 2J3506 17 10
5/8" 8J8980 9W2317 ˗ ˗ ˗ 3F5108 4K0367 17 10
3/4" 3G1628 9W2318 ˗ ˗ ˗ 5J4771* 2J3506 17 10
5/8" 8J4043 7T1632 ˗ ˗ ˗ 3F5108 4K0367 17 10
3/4" 9J3655 7T1629 ˗ ˗ ˗ 5J4771* 2J3506 17 10
5/8" 5D9731 7T1631 ˗ 4T2966 ˗ 3F5108 4K0367 17 10
3/4" 8J9821 7T1628 ˗ 4T9603 ˗ 5J4771* 2J3506 17 10
5/8" 8J4043-6 9W2336 ˗ ˗ ˗ 3F5108 4K0367 17 10
3/4" T74763 9W2337 ˗ ˗ ˗ 5J4771* 2J3506 17 10
5/8" 5D9732 7T1630 5D9732ICE 4T3035 ˗ 3F5108 4K0367 17 10
3/4" 7D1949 7T1627 7D1949ICE 4T3037 4T3037ICE 5J4771* 2J3506 17 10
5/8" 4T2237 ˗ ˗ 7T3496 ˗ 3F5108 4K0367 17 ˗
3/4" 4T2236 ˗ 4T2236ICE 7T3495 ˗ 5J4771* 2J3506 17 ˗
˗
2J3506 17 ˗
3/4" ˗ ˗ ˗ 1282577 1341778 5J4771* 2J3506 17 ˗
˗ ˗ ˗ 1043628 1043631 5J4771*
3/4" ˗ ˗ ˗ 4T8317 1004581 5J4771* 2J3506 17
3/4" ˗ ˗ ˗ 4T6511 4T6511ICE 5J4771* 2J3506 17 ˗
BOLT HOLE
3/4"
6"
CURVED FLAT
QUANTITY
10"
MOUNTING HARDWARE
13"
1-3/4"
8"
6"
8"
1"
1-3/8"
8"
3/4"
10"
10"
THICKNESS WIDTH
8"
5/8"
1/2"
6"
STD H/T STD CARBON SERRATED H/T STD H/T SERRATED H/T BOLT NUT
heat-treated edges (H/T) carbon edges only
1/2" 6"
THICKNESS WIDTH BOLT HOLE QUANTITY
3F5108 4K0367 ˗ 11
˗
3F5108
˗ ˗
1957269 ˗ ˗ ˗
˗
MOUNTING HARDWARE
4K0367 19
˗ 4Z8968
CURVED FLAT
˗
5/8"
3/4" 8"
5/8"
See next page
9 Foot Grader Blades
8 Foot Grader Blades
*2-3/4” long bolt listed for widest coverage. Some applications can use 4F7827 (2-1/4”) or 5J4773 (2-1/2”) bolts if preferred
8. All manufacturers’ names, numbers, symbols and descriptions shown are for reference only. It is not
implied that any part listed is the product of those manufacturers
GRADER BLADES
STD H/T STD CARBON SERRATED H/T STD H/T SERRATED H/T BOLT NUT
heat-treated edges (H/T) carbon edges only
5/8" ˗ 4Z8652 ˗ ˗ ˗ 3F5108 4K0367 ˗
5/8" 6"
THICKNESS WIDTH BOLT HOLE QUANTITY
MOUNTING HARDWARE
23
CURVED FLAT
STD H/T STD CARBON SERRATED H/T STD H/T SERRATED H/T BOLT NUT
heat-treated edges (H/T) carbon edges only
5/8" ˗ 9W2305 ˗ ˗ ˗ 3F5108 4K0367 ˗ 14
3/4" ˗ 9W2306 ˗ ˗ ˗ 5J4771* 2J3506 ˗ 14
5/8" ˗ 9W2321 ˗ ˗ ˗ 3F5108 4K0367 ˗ 14
3/4" ˗ 9W2322 ˗ ˗ ˗ 5J4771* 2J3506 ˗ 14
3F5108 4K0367 24
˗ 4Z8653 ˗
˗
˗ ˗
1321011 ˗ ˗
6"
8"
WIDTH
6"
THICKNESS BOLT HOLE
1/2"
8"
5/8"
5/8"
5/8" 3F5108 4K0367 ˗ 24
˗ ˗
QUANTITY
MOUNTING HARDWARE
CURVED FLAT
See next page
STD H/T STD CARBON SERRATED H/T STD H/T SERRATED H/T BOLT NUT
heat-treated edges (H/T) carbon edges only
5/8" ˗ 9W2303 ˗ ˗ ˗ 3F5108 4K0367 ˗ 12
3/4" ˗ 9W2304 ˗ ˗ ˗ 5J4771* 2J3506 ˗ 12
5/8" ˗ 9W2319 ˗ ˗ ˗ 3F5108 4K0367 ˗ 12
3/4" ˗ 9W2320 ˗ ˗ ˗ 5J4771* 2J3506 ˗ 12
1/2"
6"
8"
THICKNESS WIDTH QUANTITY
MOUNTING HARDWARE
CURVED FLAT
BOLT HOLE
12 Foot Grader Blades
11 Foot Grader Blades
10 Foot Grader Blades
STD H/T STD CARBON SERRATED H/T STD H/T SERRATED H/T BOLT NUT
heat-treated edges (H/T) carbon edges only
5/8" ˗ 9W2307 ˗ ˗ ˗ 3F5108 4K0367 ˗ 16
3/4" ˗ 9W2308 ˗ ˗ ˗ 5J4771* 2J3506 ˗ 16
5/8" ˗ 9W2323 ˗ ˗ ˗ 3F5108 4K0367 ˗ 16
3/4" ˗ 9W2324 ˗ ˗ ˗ 5J4771* 2J3506 ˗ 16
16
CURVED FLAT
QUANTITY
MOUNTING HARDWARE
˗ 1359541 ˗ ˗ ˗ 3F5108 4K0367 ˗
6"
WIDTH
6"
BOLT HOLE
1/2"
8"
THICKNESS
5/8" 5/8"
14 Foot Grader Blades
*2-3/4” long bolt listed for widest coverage. Some applications can use 4F7827 (2-1/4”) or 5J4773 (2-1/2”) bolts if preferred
9. All manufacturers’ names, numbers, symbols and descriptions shown are for reference only. It is not
implied that any part listed is the product of those manufacturers
ITR PLOW BOLTS
GET
Hardware
1-1/4" 4F3647 400
1-1/2" 4F3646 ˗
1-3/4" 4F3648 ˗
2" 4F3649 300
2-1/4" 4F3650 ˗
2-1/2" 4F3651 250
2-3/4" 4F3652 250
3" 4F3662 240
3-1/2" 4F3663 ˗
5" 4F4043 130
1-1/2" 4F3664 250
1-3/4" 4F3653 125
2" 4F3654 200
2-1/4" 3F5108 150
2-1/2" 4F3656 150
2-3/4" 4F3657 120
3" 4F3658 120
3-1/2" 4F3665 125
3-3/4" 4F0391 50
4" 4F3671 50
5" PB-522 85
2" 4F3672 120
2-1/4" 4F7827 110
2-1/2" 5J4773 100
2-3/4" 5J4771 100
3" 1J6762 100
3-1/4" PB-330 90
3-1/2" 3/4X3-1/2PB 40
3-3/4" 5F8933 70
4" PB-336 75
4-1/2" 1J0962 30
4-5/8" 1J6761 25
6" 5P6783 50
7-1/4" 5P6784 45
5/8"
3/4"
1/2"
SIZE LENGTH PART#
(Plow Bolt)
BOX QTY
(Typically)
Plow Bolts
2-1/2" 5J4772 40
2-3/4" 6F0196 60
3" 5J2409 60
3-1/2" 2J2548 50
4" PB-744 50
4-1/4" 2J5458 40
4-5/8" 1J0849 30
2-1/2" 3J2801 50
2-3/4" 1J5607 50
3" 4F4042 50
3-1/4" 4J9058 50
3-1/2" 4J9208 50
3-3/4" 8J2928 30
4" 5P8136 50
4-1/2" 1J3527 35
5" 1J2034 25
5-1/4" 1J4947 25
5-1/2" PB-952 25
6" 3171693 30
3-3/8" 8T9079 30
3-3/4" 6V6535 30
4-1/8" 5P8823 20
4-1/8" 5P8823FT* 20
4-1/2" 6V8360 20
5" 5P8361 20
5-1/2" 1981092 15
6" 1-1/4X6PB 15
6-5/8" 2099311 15
7-1/2" PB-815 15
4-1/2" 198-71-21850 15
5-1/2" 198-71-21860 15
6-1/8" 198-71-21870 15
1-1/4"
1-3/8"
1"
7/8"
SIZE LENGTH PART#
(Plow Bolt)
BOX QTY
(Typically)
*Entire length of bolt shank is threaded. See next page
10. 2" PB625200 150
2-1/4" PB625225 140
2-1/2" PB625250 130
3" PB625300 110
3-1/2" PB625350 90
2-1/4" PB750225 100
2-1/2" PB750250 90
2-3/4" PB750275 85
3" PB750300 80
3-1/2" PB750350 70
3-3/4" PB750375 65
3" PB100300 40
3-1/4" PB100325 40
3-1/2" PB100350 40
4" PB100400 35
4-1/2" PB100450 30
3-3/4" PB125375 20
4" PB125400 15
4-1/2" PB125450 15
5" PB125500 10
1"
LENGTH
SIZE BOX QTY
(Typically)
PART#
(Bolt with Nut)
5/8"
3/4"
1-1/4"
7/8" 3" PB875300 50
All manufacturers’ names, numbers, symbols and descriptions shown are for reference only. It is not
implied that any part listed is the product of those manufacturers
ITR PLOW BOLTS
Plow Bolts w/Nuts
✓ Fine Grain Steel
✓ Hardened for High Strength
✓ Heat Treated for Wear Resistance
✓ SAE Grade 8 & ISO 10.9
✓ Phosphate & Oil Coated
Quality you can
depend on!
Specialty Reducer
Plow Bolts 5/8” 3/4”
Tip: Reducer plow bolts are commonly
used to adapt 3/4” bolt hole grader
blades to 5/8” bolt hole moldboards.
Stock one edge for 2 applications!
2-1/4" 5/8X21/4SP 120
2-3/4" 5/8X23/4SP 120
PART#
(Reducer Plow Bolt)
5/8" SHANK
3/4" HEAD
BOX QTY
(Typically)
LENGTH
SIZE
See next page
11. All manufacturers’ names, numbers, symbols and descriptions shown are for reference only. It is not
implied that any part listed is the product of those manufacturers
ITR PLOW BOLTS
• GET hardware should not be
lubricated
• Mating surfaces should be clean,
paint free and smooth
• Torque to suggested value
• Set bolt head firmly
• Re-torque to suggested value
Torque Suggestion
Hex Nuts Tapered Nuts Flat Washers
1-3/8" 198-71-21890
5P8245
7/8"
1-1/4" 4K0684
DIAMETER PART#
(Hard Washer)
1/2"
5P8249
1" 5P8250
5/8" 5P8247
3/4" 5P8248
1-3/8" 198-71-21911
3/4" 2J3506
DIAMETER PART#
(Hex Nut)
5/8" 4K0367
1/2" 1F7958
1-1/4" 3K9770
7/8" 2J3505
1" 2J3507
1-1/4" 5P8362
1" 8J2933
DIAMETER PART#
(Tapered Hex Nut)
1/2" 100 ± 15 135 ± 20
5/8" 200 ± 30 270 ± 40
3/4" 350 ± 45 475 ± 60
7/8" 550 ± 65 750 ± 90
1" 850 ± 110 1150 ± 150
1-1/4" 1700 ± 220 2300 ± 300
1-3/8" 2250 ± 220 3050 ± 300
THREAD SIZE TORQUE
(Foot Lbs)
TORQUE
(Nm)
Tip: Tapered nuts are
commonly used when installing
bucket tooth adapters, select
sidebar protectors and most
top cover plates.