Our NIDPlug+™ is the ideal solution for creating demarcation points in space-restricted locations. It's the industry's first pluggable 10Gbit/s demarcation SFP+ device specifically designed to enable high-speed services in the field where it’s not possible to use a traditional device. Consuming less than 2.5 watts and requiring no additional floor space, NIDPlug+™ provides enterprises and communication service providers with the comprehensive management capabilities needed to deliver strict SLA-based Carrier Ethernet.

1. Meet the industry’s first pluggable 10G demarcation device
September 2022
NIDPlug+™ for high-speed Carrier Ethernet in space-constrained locations

2. © 2022 ADVA. All rights reserved.
2
The growing need for 10G demarcation
• Wholesale network providers are facing rapidly
rising bandwidth demands for a wide range of
customers and applications
• Service providers need to deliver high-speed
Carrier Ethernet in environments where
standalone demarcation solutions can’t be
deployed
• The ADVA NIDPlug+™ enables 10Gbit/s
demarcation where it’s not possible to use a
traditional device
• It consumes less than 2.5 watts and requires no
additional space
Wholesale
provider
network
Traditional
router or
firewall
NIDPlug+™

3. © 2022 ADVA. All rights reserved.
3
Demarcation wherever it’s needed with NIDPlug+™
• For CSPs, wholesalers and enterprises across a wide range of
industries, demarcation is becoming essential in more
locations
• NIDPlug+™ supports a comprehensive set of Carrier Ethernet
and Layer 2 connectivity services
• It builds on our widely deployed MEF 3.0-certified Carrier
Ethernet portfolio
• NIDPlug+™ offers sophisticated OAM capabilities such as
performance monitoring, service activation testing and fault
management, and meets stringent synchronization demands

4. © 2022 ADVA. All rights reserved.
4
Ultra-small form factor demarcation
NIDPlug+™ features
• Pluggable demarcation for space-constrained installations
• Lowest power consumption at 10Gbit/s interface
• MEF 3.0-compliant policing and comprehensive OAM
• Service loopback for SAT and diagnostics
• Remote management via CLI over SSH
• Low-touch deployment with DHCP
• Digital diagnostic monitoring of operating parameters
Physical
• SFF-8431 SFP+ host interface
• 10km, 1310nm 10GbE optical interface
• 2.5W power consumption
• -40ºC to +70ºC operating temperature
OAM/monitoring
• MEF-35/36 SOAM PM
• Service loopback SAT reflector
Layer 2 services
• Up to 8 EVCs
• P-bit/DSCP classification
• MEF 10.3 token-share policers
• 32 policers, 4 envelopes

5. © 2022 ADVA. All rights reserved.
5
NIDPlug+™ specifications
Parameters Values
Module type SFP+
Transmitter fiber type 8/125 μm SM
Receiver fiber Type 8/125 μm SM
Connector Duplex LC
Temperature range -40 to +70° C (-40 to 158°F)
Environmental standards compliance Telcordia SR-3580 Level 3 (NEBS) compliant IEC 60529 IP20,
indoor office FCC 15 subpart Class B
OPR/OPT accuracy +/- 2dB
OPR measurement range -22 to +2dBm
Maximum power penalty at dispersion 3.5dB
Bit error ratio <10-12
Maximum link distance 10km

6. © 2022 ADVA. All rights reserved.
6
Parameters Minimum Maximum
Transmitter operating wavelengths 1260nm 1335nm
Optical output power -8.2dBm 0.5dB
Extinction ratio 3.5dB
Transmitter dispersion penalty 3.2dB
Side-mode suppression ratio 30dB
Relative intensity noise -128dB/Hz
Transmitter output eye mask IEEE802.3-2008 Clause 52.9.7
Maximum receive power (damage) 4dbm
Receiver operating wavelengths 1260nm 1335nm
Receiver sensitivity (max) in OMA (average) -12.6dBm
Average received Power -14.4dBm 0.5dBm
Receiver reflectance -12dBm
Operating case temperature -40°C 70°C
Power supply / power consumption 3.2 to 3.4VDC; 3.3VDC nominal / <2.5W
Management 2-wire interface for DDM compliance
Environmental sustainability RoHS and REACH compliant
NIDPlug+™ specifications (continued)

7. Thank you
IMPORTANT NOTICE
ADVA is the exclusive owner or licensee of the content, material, and information in this presentation. Any reproduction, publication or reprint, in whole or in part, is strictly prohibited.
The information in this presentation may not be accurate, complete or up to date, and is provided without warranties or representations of any kind, either express or implied. ADVA shall not be responsible for and disclaims any liability for any loss or damages, including without limitation,
direct, indirect, incidental, consequential and special damages, alleged to have been caused by or in connection with using and/or relying on the information contained in this presentation.
Copyright © for the entire content of this presentation: ADVA.
www.adva.com | info@adva.com